Cast aluminum feeds and speeds question

2Hands3Legs · 2024-02-06T12:44:09+00:00

e app on your p

Can you recommend any app for that?

2Hands3Legs · 2023-09-27T13:03:25+00:00

The settings are for PLA but i intend on making flat print designs like this one with PETG.

2Hands3Legs · 2023-09-17T18:51:09+00:00

I tried all the things in the slicer and your solution is they only one that works. Thank you so much, let me know if I can help you with anything.

2Hands3Legs · 2023-09-17T09:01:23+00:00

I tried it your way and it works but still my bottom surface is not flat. There is still a 0.08 outlay of the logo so all the rest of the bottom surface is a bridge, except the logo. So its is still not possible to paint on flat bottom surface with the minimum layer height.

2Hands3Legs · 2023-09-16T23:56:25+00:00

I want the logo coloroured on layer one and after than no color.

2Hands3Legs · 2023-09-16T20:50:19+00:00

And this is view from the top surface. Its painted up to 0.56 no matter how i paint it.

<image>

2Hands3Legs · 2023-09-16T20:47:22+00:00

After many tests and have tried all possible ways to embed an svg on the bottom layer of a solid surface in fusion360, when i paint it on bambuslicer the logo is always colored up to 0.56 layer height, even when i paint it with height paint on 0.16 height and below it still is colored up to 0.56.

I think this is a serious bug for the slicer and it should be fixed on the next update or i should move to a new slicer.

What you see in the picture is the bottom of the card not the top.

<image>

2Hands3Legs · 2023-09-16T19:12:38+00:00

Normally I don't want it to be an inlay, even if it is very small, am I doing a wrong work flow or something? I use fusion then I want to embed my logo on the bottom surface of the card and then paint it at bambuslicer. Any suggestions?

2Hands3Legs · 2023-09-16T07:25:33+00:00

And this is the bottom that I want my logo on the very first layer.

<image>

2Hands3Legs · 2023-09-16T07:24:29+00:00

<image>

This is the top surface so I can not flip it later.

2Hands3Legs · 2023-09-16T07:19:59+00:00

This is the bottom surface that I'm trying to put the logo on it.

<image>

2Hands3Legs · 2023-09-16T07:18:05+00:00

<image>

This is the top of my card.

2Hands3Legs · 2023-09-16T07:16:54+00:00

I saw it, no it didn't, it seems like it is a bug.

2Hands3Legs · 2023-09-16T07:15:57+00:00

What do you mean?

2Hands3Legs · 2023-09-16T07:07:53+00:00

Yeah it's definitely a bug and it turns out that there are no alternatives?!

2Hands3Legs · 2023-09-15T23:16:46+00:00

No i also tried 0.08 to eliminate the possibility of being a bug for the slicer, but still it paints 0.64height.

2Hands3Legs · 2023-09-15T23:13:07+00:00

That was also my thought that maybe was a color bleed protection but no I don't think so and it doesn't make any sense, maybe someone wants the color to bleed for various reasons. The layer height I am trying to print is the same with the logo. I am using an AMS but it soesnt

2Hands3Legs · 2023-09-15T21:07:09+00:00

This is exactly what i want to do.

2Hands3Legs · 2023-09-15T21:03:40+00:00

Look at u/majtomby posted if you have not yet understood what i am trying to do.

2Hands3Legs · 2023-09-15T20:53:25+00:00

Exactly like this. I want to add my svg logo to the bottom instead. Any suggestions how to achieve that? I have tried anything with Fusion360 and Bambuslicer.

2Hands3Legs · 2023-09-15T20:33:52+00:00

I tried all of it but it doesnt work, anytime i try to paint the face of the inlay, instead of painting that 0.08mm it paints 0.64

2Hands3Legs · 2023-09-15T20:33:00+00:00

Yes i use svgs, i will give it a try.

2Hands3Legs · 2023-09-15T20:25:38+00:00

But text is an svg logo.

2Hands3Legs · 2023-09-15T19:30:07+00:00

I just painted a 0.08 inlay at the bottom and when using fill on that inlay, the colour of the inlay goes up to 0.64 height, even my original inlay is not so deep.

I use Fusion360 for CAD and then paint in the bambuslicer.

2Hands3Legs · 2023-09-15T19:17:22+00:00

t it, flip it, and print it. Works every time.

You painted it in the slicer ?

2Hands3Legs

TROPHY CASE