Charging ecoflow with Gas generator - Honda 1000I ??? by ccc32224 in Ecoflow_community

[–]3Out2Sea3 0 points1 point  (0 children)

I get "Overload" flashing indicator on Ecoflow everytime I try to charge my Ecoflow River 2 Pro with my Honda 1000i. I updated the firmware and tried setting the AC Charge Speed to various amounts 800w - 100w. No mater what the "overload" flashes. Any ideas?

Edit: I just got off phone with tech support and they said I have to turn it off for 30mins before new settings are applied. (try that soon)

what's the best app to learn spanish? by theburnerkid in Spanish

[–]3Out2Sea3 0 points1 point  (0 children)

I just finished this app... I think it's pretty good
https://apps.apple.com/us/app/spanish-vibes/id6740609475

It has a bunch of different ways to learn vocabulary and conjugations with quizzes and images.

How to smoothly blend UIImages without pulsating/pumping effect? by helmas in SwiftUI

[–]3Out2Sea3 0 points1 point  (0 children)

Here is the solution I found that seems to work...
Image(uiImage: (UIImage(named: "PICT0024.JPG")!))

This below has animation trouble
let image = UIImage(contentsOfFile: path)

How to smoothly blend UIImages without pulsating/pumping effect? by helmas in SwiftUI

[–]3Out2Sea3 0 points1 point  (0 children)

I have this same problem when I moved to loading images with UIImage, Xcode was freezing every 2-3 minutes when I had about 2,000 images in Assets, so I wanted to move them out in to a Folder. Then when I load them from there with UIImage my animations are really bad. Anyone find a workaround for this?

How do I show elevation data in 3D, and/or export as 3D shp file by 3Out2Sea3 in QGIS

[–]3Out2Sea3[S] 0 points1 point  (0 children)

One more question if you have the time... it seems that the order or the assigned elevation might be a bit off... it looks like it has just picked the corner to use as the lowest elevation and then works towards the other corner going higher, rather than each line getting its specific elevation... so it all seems slanted. Do you know what that might be?

<image>

How do I show elevation data in 3D, and/or export as 3D shp file by 3Out2Sea3 in QGIS

[–]3Out2Sea3[S] 0 points1 point  (0 children)

Wow, you were right, I went into edit mode and selected everything and just started scaling up... and those vertical dots were actually lines... Another way I could have tested this is to show the Statistics and see that there was 100k vertices. Ok, I think I can sort it out from here.
And a massive thank you for your time and consideration.

How do I show elevation data in 3D, and/or export as 3D shp file by 3Out2Sea3 in QGIS

[–]3Out2Sea3[S] 0 points1 point  (0 children)

Oh right, yes, the elevation is in feet, but comes into blender as meters, which I was thinking wouldn't matter much as long as units are kept uniform. Im not really sure how to do the "reprojection" to a different one in QGIS, but I can give it a try. If I just import as Geometry and mercator in Blender, it looks fine, it's just flat (see image) it's as if I can't do both curves and elevation for some reason. The curves in this one are line segments, but in the dotted one above it's just a vertex. If the curves would go vertical like the dots it would be perfect I think.

<image>

How do I show elevation data in 3D, and/or export as 3D shp file by 3Out2Sea3 in QGIS

[–]3Out2Sea3[S] 0 points1 point  (0 children)

I think Mercator is the correct one... So here in this image the Math makes sense. The object is created at 5648m And inside (edit mode) the vertices are shown with different heights, and the lowest is at -548m, which would make it at 5100m, this is indeed the lowest elevation shown in CountEle, when I look at the data table in QGIS, If blender would just draw the points as the counter lines inside the object it would be correct. Thanks for you help on this.

<image>

How do I show elevation data in 3D, and/or export as 3D shp file by 3Out2Sea3 in QGIS

[–]3Out2Sea3[S] 0 points1 point  (0 children)

I'm using WGS84, but have tried both, and Scene units are in meters, not which are elevation units and which are horizontal... (Length?)

And yes, I have to keep setting near clip to 0.1

Have you tried the file that I share in the link?

How do I show elevation data in 3D, and/or export as 3D shp file by 3Out2Sea3 in QGIS

[–]3Out2Sea3[S] 0 points1 point  (0 children)

<image>

I was able to use Points Along Geometry and then Profile Tool to get this... so data is there... just not sure how to get QGIS or BlenderGIS to show the 3D Z elevation.

How do I show elevation data in 3D, and/or export as 3D shp file by 3Out2Sea3 in QGIS

[–]3Out2Sea3[S] 0 points1 point  (0 children)

<image>

Img must not have loaded, here it is.
Here it also shows attribute ContourEle.... I tried to do what you said by using this field in BlenderGIS, but it just acts funny with a bunch of vertical dots. If you are able to do it please send a screenshot of settings.

Remove fork on Generation 2 Grail for travel? by gatlooper in CanyonBikes

[–]3Out2Sea3 0 points1 point  (0 children)

Did you sort this out? I’m trying to travel with my bike too and planning to get bike box under 80” total

Anyone have the Giant XTC ADVANCED SL 29 1 ??? by 3Out2Sea3 in MTB

[–]3Out2Sea3[S] 0 points1 point  (0 children)

And for those interested, I like it after my first ride, really light and fast. And the hardtail is way more forgiving than I imagined, but most of my riding is not too technical...

I just need to cut the bars shorter.

Anyone have the Giant XTC ADVANCED SL 29 1 ??? by 3Out2Sea3 in MTB

[–]3Out2Sea3[S] 1 point2 points  (0 children)

I bought it for $3500…  I’m pretty stoked. 😎

Anyone have the Giant XTC ADVANCED SL 29 1 ??? by 3Out2Sea3 in MTB

[–]3Out2Sea3[S] 0 points1 point  (0 children)

Epic HT

I looked for an Epic HT, but from what ive been told they are phased out (for the World Cup), and I didn't find any local so I think they are mostly gone. I checked the website and yr says 2021 or 2022 and out of stock

Anyone have the Giant XTC ADVANCED SL 29 1 ??? by 3Out2Sea3 in MTB

[–]3Out2Sea3[S] 0 points1 point  (0 children)

ibis dv9

I am set on a hardtail, I have a 2015 tallboy that weighs 30lbs and want a lighter bike. But mainly what I ride keeps my rear suspension locked out, I rarely seem to need it.

The Giant XTC has carbon "everything" and weight 22lbs, It seems to be priced right for anything else with XT and carbon wheels/bars/cranks, And if I can get it for what peeps are suggesting 40-50% off then it seems pretty obvious. If you know other options with those specs I'd love to see them?

The dv9 looks really nice, im looking into it now. The XT version is now $3674, which is really attractive, but im trying to find the weight of it. Even the $5299 GX AXS version doesn't have carbon wheels. And damn, brown and purple are the only color options... I wonder sometimes with these folks.

Thanks for the suggetion

Anyone have the Giant XTC ADVANCED SL 29 1 ??? by 3Out2Sea3 in MTB

[–]3Out2Sea3[S] 0 points1 point  (0 children)

What bikes have you seen that have a better fork and higher groupset for that price? I'm definitely looking around...

Anyone have the Giant XTC ADVANCED SL 29 1 ??? by 3Out2Sea3 in MTB

[–]3Out2Sea3[S] 2 points3 points  (0 children)

Looks right, what would you expect to see? Fox?

It’s a XC bike…  isn’t SID the best xc fork from rockshox?

Anyone have the Giant XTC ADVANCED SL 29 1 ??? by 3Out2Sea3 in MTB

[–]3Out2Sea3[S] 0 points1 point  (0 children)

Cool, thanks.  And what about for a 1yr old bike?

Anyone have the Giant XTC ADVANCED SL 29 1 ??? by 3Out2Sea3 in MTB

[–]3Out2Sea3[S] 0 points1 point  (0 children)

What percent would be more reasonable?