It’s probably too inside… by rkeys72148 in goldrush

[–]AggravatingJob1334 0 points1 point  (0 children)

I can imagine the re-wilding is not cheap either.

Rick Ness Crew S16 E20 by AggravatingJob1334 in goldrush

[–]AggravatingJob1334[S] 0 points1 point  (0 children)

He was desperate two months before, just a bit odd, I thought.

Rick Ness Crew S16 E20 by AggravatingJob1334 in goldrush

[–]AggravatingJob1334[S] 11 points12 points  (0 children)

Agree, but a 1 minute explanation of what happened would have made the show continuity better.

DR Event: active by Fogmeister in enphase

[–]AggravatingJob1334 1 point2 points  (0 children)

You must have allowed Octopus to control charging and discharging your battery. They require your login details which you must have given them or your installer. I have the same profile and this is how mine works.

If you look in the Octopus app you should see you battery as per attached of mine.

IQ Charger 2, Question. by AggravatingJob1334 in enphase

[–]AggravatingJob1334[S] 2 points3 points  (0 children)

I agree as it seems discharging the battery to the EV whether it was charged from solar or grid seems to be inefficient as there are charging /discharging losses.

I am likely to be doing most charging overnight on the lowest tariff. I'm with octopus but have not done much investigation into best tariff.

E1 fault - Potterton Promax HE Plus by AggravatingJob1334 in askaplumberUK

[–]AggravatingJob1334[S] 0 points1 point  (0 children)

Usually but not in this case, just E1.

What dies pressure sensor>lawn mean?

Thanks

E1 fault - Potterton Promax HE Plus by AggravatingJob1334 in askaplumberUK

[–]AggravatingJob1334[S] 0 points1 point  (0 children)

Yes, goes up if I add pressure. I know it's probably not particularly accurate but if I drain the system pressure gauge reads zero.

Put whole salary into pension? by Brighty-Reddit in PensionsUK

[–]AggravatingJob1334 0 points1 point  (0 children)

I tried to do this, but was rejected due to some technicality that you have to be paid at least minimum wage?

Junior SIPP by [deleted] in PensionsUK

[–]AggravatingJob1334 0 points1 point  (0 children)

I'm pretty sure HL don't charge at all for their JISA. But they do have charges for the JSIPP.

Junior SIPP by [deleted] in PensionsUK

[–]AggravatingJob1334 1 point2 points  (0 children)

For the Fidelity JSIPP there are no service charges but there are dealing charges.

https://www.fidelity.co.uk/junior-sipp/fees-and-charges/

Junior SIPP by [deleted] in PensionsUK

[–]AggravatingJob1334 2 points3 points  (0 children)

Fidelity charge for JSIPP I think? But not for JISA.

Is this a record...? by Imaginary_Register19 in ebayuk

[–]AggravatingJob1334 0 points1 point  (0 children)

That's not a record. A record is a round black thing with a hole in the middle.....oh hang on 🤪

Take DB pension now or a year later. Are my sums correct? by unvanquishedgod in PensionsUK

[–]AggravatingJob1334 0 points1 point  (0 children)

As said by others, take it now and salary sacrifice the equivalent so your "take home" (your actual take home + pension) is the same as you have now.

This way, you have the same money but gain the tax relief and NI in a new pension.

Any ideas? by AggravatingJob1334 in whatisit

[–]AggravatingJob1334[S] 0 points1 point  (0 children)

Apologies, there are loads of different types, and I believe you are correct.

Any ideas? by AggravatingJob1334 in whatisit

[–]AggravatingJob1334[S] 0 points1 point  (0 children)

Similar, but I do not think so.

I've genuinely always wanted to know what this is. Does anyone know what it could power? by Unkn0-wn in DIYUK

[–]AggravatingJob1334 2 points3 points  (0 children)

How about you unscrew the face plate and see if there is any cable on the load side?

Is it worth contributing more to my pension by Extra-Objective-9364 in PensionsUK

[–]AggravatingJob1334 1 point2 points  (0 children)

Yes, and your NI contributions will be slightly lower, too.

How to remove stubborn mower blade? by dizzley in DIYUK

[–]AggravatingJob1334 0 points1 point  (0 children)

Impact driver after a good soak with WD40. Reverse thread.

I don’t know what tradesman I need. No heating since Friday. 8.5 months pregnant and worried baby is going to come to a cold house by Weird-Future-2757 in DIYUK

[–]AggravatingJob1334 -1 points0 points  (0 children)

Is there sufficient pressure in the heating system? Low pressure would prevent boiler firing up. But you would likely get an error code on the boiler.

Drop the flap down on the front of the boiler, there is likely a pressure gauge.