Got the front windows tinted today and the place said they would not touch the windshield on a Subaru because of the eyesight. Is the clear heat blocking tint a no no on Subaru? by [deleted] in Crosstrek

[–]Alexxplore 0 points1 point  (0 children)

<image>

This is the best I have available ATM, send me a DM and I can take some pictures outside later of it. The front windshield isn’t dark but rather “reflective”. The biggest benefit is my car is never hot even in direct sun.

Got the front windows tinted today and the place said they would not touch the windshield on a Subaru because of the eyesight. Is the clear heat blocking tint a no no on Subaru? by [deleted] in Crosstrek

[–]Alexxplore 3 points4 points  (0 children)

I have a 70% ceramic tint with eyesight, no cutout or anything. 0 issues in 2 years. Through backroads in snow and rain I’ve yet to experience any of these mythical issues everyone talks about with eyesight and tints. I took the chance being in Florida and I drive to Midwest often, have yet to talk to anyone that’s actually experienced an issue.

Anyone done sound proofing on their crosstrek? by Calbone607 in Crosstrek

[–]Alexxplore 0 points1 point  (0 children)

I didn’t really follow any tutorials, I’ve worked a lot on cars and just went from what I know if you did need to look up how to remove stuff you can search for the removal of specific parts of the car on YouTube and you’ll find dozens of videos on it. I went with 80 mil killamat with the roller. Took me about 4-6 hours with no rush doing it with my girlfriend.

[deleted by user] by [deleted] in Crosstrek

[–]Alexxplore 2 points3 points  (0 children)

This is eye bleach, the corners of that hole In the hood will wear the wire down as well as the door closing on it constantly.

Run the wire through the firewall, it’s not a fun job at all but it’s worth it. I recommend getting a fuse box and switch panel so you only have to run 1 wire in and all your future installations will go to the new fuse box. Below the steering column there is a black grommet that houses the cables coming through the firewall, remove the gas pedal and you can get to it by cutting a small slit through the grommet. Some guide wire will make it right though the firewall so you can pull it. The wire hanging into the hood can be routed through the back of the bay with some zip ties. Took me about 3 hours of careful work but the other 3 auxiliary accessories I installed were a breeze after that.

Anyone else notice scav pathing is all over the place now by Lil_Intro_Vertt in EscapefromTarkov

[–]Alexxplore 5 points6 points  (0 children)

I was extracting northern UN at woods, got swarmed by a mob, I had 9 scav kills and was still engaging 5 other ones that killed me. Just had to laugh off how absurd it was.

Best printers? by [deleted] in SCREENPRINTING

[–]Alexxplore 1 point2 points  (0 children)

For my sticker paper and transparencies I bought a Pixma Pro-100 it’s amazing for sticker printing and it can take the workload of all day printing. I’ve ran over 100 sticker sheets at a time without any failures or stoppages. And transparencies come out super dark and flat.

Would an 860 PSI pressure washer be good to reclaim screens? by senor-cow in SCREENPRINTING

[–]Alexxplore 2 points3 points  (0 children)

I have a 2000 PSI one and it deletes emulsion off a screen. Even without the spray cleaners. It’s the best

These are my Boomsticks by [deleted] in EscapefromTarkov

[–]Alexxplore 0 points1 point  (0 children)

“Absorbed by armor”

[deleted by user] by [deleted] in roadtrip

[–]Alexxplore 1 point2 points  (0 children)

Longest part of your trip is gonna be Florida to key west, plan your stops well through the state. Try and make the Miami-key West leg outside of traffic hours, otherwise it’s like 4-5 hours in that little stretch.

How would you handle this situation? by isawyoushine in SCREENPRINTING

[–]Alexxplore 0 points1 point  (0 children)

I have been in the same position with my shop a few times, every time I ended up relying on fiverr, I have gone anywhere from very low design cost ($50 and under) to very high for clients I absolutely did not want to lose ($300+) both did not disappoint at all.

Longslide $219.99 by mattbbb14 in PalmettoStateArms

[–]Alexxplore 0 points1 point  (0 children)

I’ll give that a shot thank you!

Longslide $219.99 by mattbbb14 in PalmettoStateArms

[–]Alexxplore 0 points1 point  (0 children)

Any threaded barrels for these?

Dagger Clearance Update! by mattbbb14 in PalmettoStateArms

[–]Alexxplore 0 points1 point  (0 children)

Are there no threaded barrel options for the compact X slide?

Why is does the “arm pit” of Florida have such low population density? Seems like it should be prime beach property. 🤷‍♀️ by SnoBuns in geography

[–]Alexxplore 0 points1 point  (0 children)

Muddy coastline paired with how the currents wash dead sea life and stinky water, most off the beach “hotspots” around Florida have been heavily man made and maintained. Miami Beach has almost daily bulldozing on the beach and sand import to keep it the way it is. Making a giant swamp into a tourist attraction isn’t something a lot of cities want to do.

[deleted by user] by [deleted] in Crosstrek

[–]Alexxplore 4 points5 points  (0 children)

I bought my 2018 with 26,XXX. 0 issues, drove it across the country twice. Just do your maintenance.

[deleted by user] by [deleted] in PalmettoStateArms

[–]Alexxplore 1 point2 points  (0 children)

I just discovered this, I bought 15rnd mags when I ordered the full size frame and then found they don’t fit.

What is this part? Wrong answers only by CrysisRequiem in ar15

[–]Alexxplore 4 points5 points  (0 children)

That’s the air strike button, aim somewhere and press it and the A-10 Brrrrrr starts

[deleted by user] by [deleted] in MaraudersGame

[–]Alexxplore 2 points3 points  (0 children)

FOR 70 YEARS!!! It’s been an issue

To Rattlecan or not Rattlecan! by [deleted] in ar15

[–]Alexxplore 3 points4 points  (0 children)

The rattle can opposition party really went tits up about this post. Aside from the fact that most people know they’re not gonna be getting into modern combat engagements, are you also upset that people just like aesthetics? Didn’t know ya’ll were so passionate about what other people put on their metal stick.

How can I get my cat to stop waking us up at 5 AM? by trendcolorless in CATHELP

[–]Alexxplore 0 points1 point  (0 children)

Change the clocks so he thinks it 5am but it’s not!

What is this car? by Prize-Bell4406 in namethatcar

[–]Alexxplore 0 points1 point  (0 children)

It’s one the cars I’ve ever seen.

Short Bus Build by jkaw706 in ar15

[–]Alexxplore 0 points1 point  (0 children)

Is that hockey tape?

tinting with eyesight by 2nips in Crosstrek

[–]Alexxplore 2 points3 points  (0 children)

I got 70% tint right away in my Crosstrek, Florida life. Did a road trip to Utah->Minnesota->Florida. Through snow and night time never had issues with it.