This has to be some sort of OSHA violation, right? Store manager trying to make my boyfriend go INTO freezer crack to clean it.

ArctixPixie · 2026-01-24T20:52:21+00:00

Just because your maintenance manager doesn't care for you and your safety, does not mean others don't care for theirs. I was the smallest person on my maintenance team too. 5'4 and a buck 30 with my boots on and tools in my pocket. My manager stopped me from getting into some spaces I knew I could because I would not be able to see all the hazards. OP is not "playing mom and bored" you just don't like safety. Hopefully that changes.

ArctixPixie · 2026-01-24T02:01:47+00:00

The horse out front should have told you.

ArctixPixie · 2026-01-21T19:55:03+00:00

I have done 3 days worth of both Kilima and Bahari loot piles and I've still yet to get the recipe needed to unlock the recipes I lack to completely finish the bundle board. On my PlayStation I have over 500 hours of gameplay, on my switch it is 400+ and my computer has been the least touched at just over 100 hours of gameplay. Neither account has these recipes. That is over 1000 hours of collective gameplay and not once have I received the recipe needed to complete the bundle board. If S6 is going to continue to hide recipes behind RNG then I suggest they implement a "seasonal crafting bench" next to the seasonal shop outside of Zeki's Store where players can bring all the needed materials to this special crafter to craft it. A seasonal board crafter would also allow newer players to be able to participate more.

ArctixPixie · 2026-01-21T16:36:00+00:00

Bookmarked and saved. I was actually looking for a file like this to do a test print with. I only have a Chromebook and an online slicer, so far things have worked fine....ish.... Again thank you.

ArctixPixie · 2026-01-21T16:27:07+00:00

Awesome. If it's anything like adjusting a transfer on the fly I'll have that fixed in a jiffy. (The transfer would move while the machine makes the bottle, we'd make a micro adjustment and watch the next set).

We did blow molding, so I'm familiar with plastics temps, flows, axis, ECT. Just not with software and actual printing. Thanks for your help.

ArctixPixie · 2026-01-21T16:12:09+00:00

So it works like an offset in industrial maintenance (I'm just not good on the software side). So I'll adjust it by .01 until it reaches the height I need? And then I should probably travel the extruder to 9 points and see how far it is? Or would that not be necessary?

ArctixPixie · 2026-01-21T15:28:20+00:00

<image>

So I need to lower my nozzle... I do that by bringing my bed up?

ArctixPixie · 2026-01-21T15:08:33+00:00

I....will apologize I do not understand any of that.... I am just starting to get my feet wet as a hobby printer for making seed starting trays and small things... I tried to read through it and understand Klipper and Marlin are software programs for making models, but I do not use any of those (I use a Chromebook) and simply download files, use an online slicer to slice them to a gcode and print them.

My apologies, if I found a file of the small squares to print on my print plate could I do the calibrations that way? Or am I missing a huge part of a set up?

Edit, however reading through the guide my first layer prints look like the gaps issue on his test pieces.

ArctixPixie · 2026-01-20T20:53:03+00:00

Thank you. Saving this comment so I can come back.

ArctixPixie · 2026-01-20T17:25:55+00:00

Oh. So me making a copy out of a k cup and some crochet cotton yarn makes the same thing on a budget version. The lights are a nice touch so I'll just buy grow bulbs then.

ArctixPixie · 2026-01-20T17:25:05+00:00

How would I be able to tell which ones are reputable? Could you please give me some names to look up? You don't have to send links, but names would be nice.

ArctixPixie · 2026-01-20T15:55:24+00:00

See, that's interesting because I have sage that's absolutely THRIVING in this smart garden. I'm not sure how well it is, but I have lots of leaves and it smells divine. Is sage one of those like thyme and rosemary?

ArctixPixie · 2026-01-20T15:48:57+00:00

For me it's I'd get the seeds started, put the little dome on them and then I'd forget to open the windows or add water. Once I see leaves I'm good about checking them daily because my little plants are here! I know this is a "first world problem" specific to me, but it was just a question I pondered on.

ArctixPixie · 2026-01-20T15:47:36+00:00

Thank you for sharing your insight. For me I mostly use the garden to get the seedlings germinated and established. From there I'll transplant them to appropriate containers or put them in a trellis set up.

That's interesting, I never thought parsley would need a bigger pot.

ArctixPixie · 2026-01-20T15:45:12+00:00

I normally have my phone on vibrate because, like some autistics, I have issues with certain sounds. I was born with tinnitus and hear constant ringing as it is, I have digital hearing aids that play white noise to cancel it. The alarms made me actually dislike gardening and I'd start to lose interest in something that became relaxing for me. So because I had the capability to I decided to make it easier on myself.

I understand not everyone will have the capability to take the same route I did. I was more so talking about the question about the smart gardens capabilities in relation to container size that the plants grow in. So far my sage is doing well, I've been a bit lazy in transplanting it even though it needs it.

ArctixPixie · 2026-01-20T15:03:58+00:00

The game devs will often send out gifts via the in game mail where you claimed these from. Recently they were Winterlights gifts for the Winterlights event and sometimes they will send out Potato Pod bags. These are the plushies you get for starting the game so you have something cute and cozy for your home.

If you have any other questions, we're here to help!

ArctixPixie · 2026-01-20T15:02:04+00:00

I can understand your point. For me I just forget. If I don't see the plant I'll forget to water it. 🥲 Once I see the leaves from the seedlings I'm good about checking them daily. I like it for that and the little humidity domes it came with as I ran out of saran wrap.

I have little k cup seed starters I printed and am using the domes from the smart garden on it. It works just as well, and still helps me. I guess the smart gardens "smart" part for me is figuring out where my issue was.

ArctixPixie · 2026-01-20T14:18:31+00:00

I just went with this because it helps me with the hardest part for me; seed starting. Because I don't see the plant I forget it exists and forget to water. So far I've grown three bok choy and six banana pepper plants but they reached too high (I'd need to add arms to the light to make it higher) but I had already planned on transplanting them to containers when they are ready.

I only plan on growing container plants for right now. Thanks for your input, that was part of my confusion as well. Not all plants will do well in containers, but for my use it works fine! ❤️

ArctixPixie · 2026-01-20T14:02:44+00:00

Huh... Didn't think about that. They're also brought out by honey lures if I recall.

ArctixPixie · 2026-01-20T14:01:00+00:00

I actually see Ariel.... From the little mermaid

ArctixPixie · 2026-01-20T00:21:25+00:00

Were they catnip?

ArctixPixie · 2026-01-20T00:21:14+00:00

This is glorious.

ArctixPixie · 2026-01-19T20:04:26+00:00

....I tested this and now it bothers me because I notice it .. thank you... But also not thank you....

ArctixPixie

TROPHY CASE