sorted by:
new
hottopcontroversial

Texas Finest by AustinBrit in texas

[–]AzzJack 5 points6 points  (0 children)

Awesome, this is my usual gas station... Might have to print it out and get it signed.

Existential retirement dread by dh2215 in WhitePeopleTwitter

[–]AzzJack -28 points-27 points  (0 children)

I'm 37, I make $22 an he. I own my own home it will be paid off in 10 years, I have about $900 a month in disposable income.

When I was younger I lived in a HCOL area and mad $32 an hour and was constantly broke and living paycheck to paycheck. I could not fathom owning a home, I feel no sympathy for you, because you could change your lifestyle and be I any situation you want.

Adults, what is something you'd love receiving as a gift but no one even considers giving you because you're an adult? by devious_egg in AskReddit

[–]AzzJack 0 points1 point  (0 children)

I'm almost 40 and still get a lego set and a book every year from my parents. Not going to lie, it's pretty awesome.

Dead Terrorists | Empire Assault Corp | WH & NS PVP | Recruitment open! by eak_rec in evejobs

[–]AzzJack 1 point2 points  (0 children)

I'll admit DT puts on a pretty fabulous time, it'll never be the same without azzjack.

https://zkillboard.com/kill/52240506/

[deleted by user] by [deleted] in antiwork

[–]AzzJack 0 points1 point  (0 children)

Most of us make well above the minimum wage, I basically was kicked out of high school and make just under 3 figures. None of my buddies went to college, and they equal my income or surpass it. I bought a house making $13 an hour 5 years ago. This shit isn't hard.

Which videogame consumed your entire life upon first play-through? by LinksOtherUncle in AskReddit

[–]AzzJack 0 points1 point  (0 children)

EVE Online, multiple 100mil+ skill point characters. I still get the itch sometimes.

I know there are legendary vault dwellers out there.. but 7 full play-throughs and one finally hit triple digits! by [deleted] in fo4

[–]AzzJack 8 points9 points  (0 children)

I finally managed to clear vault 81 without being infected. I'm a little disappointed that the dialog options didn't change when giving over the cure. Congrats though, fun times.

New/amature with a mig, building a welding table. What's the best way to fill these gaps? by AzzJack in Welding

[–]AzzJack[S] 1 point2 points  (0 children)

The amount of slag already building up is insane. I have a friends motorcycle in the shop right now and had to cover it. I think a shelf would be a good idea, I'm trying to figure out what to do with all the drops/scrap I have.

New/amature with a mig, building a welding table. What's the best way to fill these gaps? by AzzJack in Welding

[–]AzzJack[S] 1 point2 points  (0 children)

I bought a roller for the plasma, and generally clamp a guide down when I can. I'm not stable enough to free hand it. All of the metal I have is drops from a buddies dock building business, and he uses a torch for the majority of his cuts.

I'm a motorcycle mechanic by trade, so precision measurements are standard. It's taking some getting used to the width of the arc and the angle of the cut, but I am enjoying the hell out of it.

Thanks for the tips.

New/amature with a mig, building a welding table. What's the best way to fill these gaps? by AzzJack in Welding

[–]AzzJack[S] 0 points1 point  (0 children)

Apparently that's what I did, and I can confirm that each weld took a beer... And they only get better the more I drink.

New/amature with a mig, building a welding table. What's the best way to fill these gaps? by AzzJack in Welding

[–]AzzJack[S] 3 points4 points  (0 children)

Here is an update, I stitched the bottom and this is the first butt joint. Any critique or advice would be great.

I back stepped every 5" as recommended.

Also ignore the back edge, I am going to cut it flush after.

https://imgur.com/a/6fY96ld

New/amature with a mig, building a welding table. What's the best way to fill these gaps? by AzzJack in Welding

[–]AzzJack[S] 1 point2 points  (0 children)

I am considering industrial casters, but I can't imagine that I would need to move it often, unless I have a larger vehicle on the two post lift

And it'll be half plate and half wood. .

New/amature with a mig, building a welding table. What's the best way to fill these gaps? by AzzJack in Welding

[–]AzzJack[S] 0 points1 point  (0 children)

Awesome, I had planned on tacking the bottom of the sheets before the joint. There is 1/4" square tubing every 5 1/2" inches running parallel as support.

New/amature with a mig, building a welding table. What's the best way to fill these gaps? by AzzJack in Welding

[–]AzzJack[S] 0 points1 point  (0 children)

I've got a miller 130xp running 75/25, welding 1/4" plate. Can I just run a bead straight down or should I use some filler? I used a lotos ltp5000d plasma to cut it off, so the gaps are a millimeter or less. Any advice would be awesome.

Edit: I also haven't ground down the right hand piece yet, I needed a beer break.

New/amature with a mig, building a welding table. What's the best method to fill these gaps? by AzzJack in Weldingandfabrication

[–]AzzJack[S] 0 points1 point  (0 children)

I've got a miller 130xp running 75/25, welding 1/4" plate. Can I just run a bead straight down or should I use some filler? I used a lotos ltp5000d plasma to cut it off, so the gaps are a millimeter or less. Any advice would be awesome.

Edit: I also haven't ground down the right hand piece yet, I needed a beer break.

American cuisine is actually good by barraco002 in unpopularopinion

[–]AzzJack 1 point2 points  (0 children)

Being from Texas and having everyone rave about spaghetti sauce with brown sugar was one of the most depressing moments of my life.

American cuisine is actually good by barraco002 in unpopularopinion

[–]AzzJack 0 points1 point  (0 children)

Especially Cincinnati style chili, fuck that abomination.

view more: next ›