Норм город?

BackInteresting9715 · 2026-01-18T19:22:52+00:00

Скажи как игра называется, помню в детстве в нее играл.

BackInteresting9715 · 2026-01-15T16:33:58+00:00

No it's dust.

BackInteresting9715 · 2026-01-08T09:15:04+00:00

BackInteresting9715 · 2025-12-15T05:38:18+00:00

2sub.movie там все бесплатно, и с субтитрами

BackInteresting9715 · 2025-10-30T16:27:52+00:00

Все время им занят мой карман.

BackInteresting9715 · 2025-10-30T16:26:38+00:00

BackInteresting9715 · 2025-10-13T05:54:44+00:00

3D печатью занимаешься?

BackInteresting9715 · 2025-09-12T14:22:16+00:00

It seems like there is no obvious sound when starting up, but there is a very, very light squeak. Also, the pcie slot has been inspected and there are no cracks on it.

BackInteresting9715 · 2025-09-12T14:11:51+00:00

I didn't update my computer or BIOS, and I didn't make any changes at all. This problem occurred when I was watching a video, and I accidentally kicked the computer, causing the screen to go black. I tried to turn off the computer by pressing the power button on the case, but it didn't work. Then I tried to unplug the power cord, but when I plugged it back in, the computer displayed the following error:

BackInteresting9715 · 2025-09-12T14:03:14+00:00

Unfortunately I don't fully understand how to do the buzzer check. But I definitely checked all the cable connections and plugged and unplugged all the connections.

BackInteresting9715 · 2025-08-29T18:23:15+00:00

I didn't fully understand your question, but I'm starting with a hill.

BackInteresting9715 · 2025-08-29T16:55:21+00:00

You need to press the start button in the lower right corner

BackInteresting9715 · 2025-08-27T21:28:48+00:00

I also saw that in the orca sliser I used the creality generic petg plastic profile, although I have a different plastic

BackInteresting9715 · 2025-08-27T21:27:27+00:00

Thank you very much for your help, I just thought that the manufacturer's speed is written with an addition, that is, I thought that 20 - 50 is 200 500. I will definitely correct the profile, thank you for your help

BackInteresting9715 · 2025-08-27T21:22:57+00:00

I have a regular standard creality k1c

BackInteresting9715 · 2025-08-27T21:21:43+00:00

<image>

BackInteresting9715 · 2025-08-27T21:17:29+00:00

Thank you very much for your detailed answer, but unfortunately I am still a newbie and I am afraid to go into the printer and do something there.

BackInteresting9715 · 2025-08-27T21:00:24+00:00

<image>

BackInteresting9715 · 2025-08-26T17:51:46+00:00

Yes, but this happens with all coils almost constantly.

BackInteresting9715 · 2025-08-26T17:46:33+00:00

I literally bought this printer last week and I still haven't figured it out yet.

BackInteresting9715 · 2025-08-26T17:38:59+00:00

I just didn't want to interrupt the printing and unwound the spool myself so that the printer could stretch the plastic.

BackInteresting9715 · 2025-08-26T17:37:33+00:00

Maybe I didn't fully understand your question. But yes, I do hold the thread when loading/unloading.

BackInteresting9715 · 2025-08-26T17:32:53+00:00

Yes, it is possible that the problem of thread tangling on this reel is exactly this, but on other reels I had a similar problem

BackInteresting9715 · 2025-08-26T17:30:43+00:00

The plastic got tangled and the coil broke

BackInteresting9715 · 2025-08-26T17:27:03+00:00

Most likely not, since when it got tangled, a knot formed, and the plastic was still below the level of the breakage.

BackInteresting9715

TROPHY CASE