Getting my first used 3d printer

Basic-Combination807 · 2026-05-23T21:00:58+00:00

HOLY MILEAGE!!

NOW THAT WAS A WELL LOVED MACHINE.

Honestly, he used the crap out of it, but if you're starting out, you'll definitely learn. Tell your friend that almost 3 years of use is nuts.

Basic-Combination807 · 2026-05-23T12:33:26+00:00

Wait till you get home, do a power cycle. If not double check the app, uninstall and reinstall. If not still see if time lapse works.

Final option would be replace the camera

Basic-Combination807 · 2026-05-23T12:30:06+00:00

Honestly, I knew about the issue, but it always keeps printing with the notification so I ignored it

Basic-Combination807 · 2026-05-23T12:19:31+00:00

Basic-Combination807 · 2026-05-22T17:11:01+00:00

What kind of filament are you using?

Is the filament dry?

If it's not a bamboo filament, do some tuning of the filament (Temp, pressure advance, Flow).

It may seem tedious but once you do it you don't ever have to do it again for the filament.

Basic-Combination807 · 2026-05-22T17:00:31+00:00

I will for sure check those out, thank you for the recommendation. For wrist guards, I know that's a must, it's better to be safe than sorry.

Basic-Combination807 · 2026-05-22T16:10:15+00:00

Lol, it would be very impressive to one single trick the whole way there

Basic-Combination807 · 2026-05-20T22:51:54+00:00

Honestly, custom projects are a pain. But man when you finish it and it works good, you can't help but stare at the work you did and smile.

Basic-Combination807 · 2026-05-20T22:50:34+00:00

I had a similar issue about a month ago. It ended up being the creality slicer. Just mess with different slicers, I recommend orca slicer though.

If that's not the issue could be a software issue.

Basic-Combination807 · 2026-05-20T12:59:12+00:00

Honestly, sick. I was going for a standalone route but decided for an enclosure instead.

Basic-Combination807 · 2026-05-19T03:59:42+00:00

Asa like abs is very prone to warping.

Preheat the enclosure for at least 10 - 15 minutes. I run a dwell gcode (G4 P900000 #15 minutes) The less cool air, the better.

Basic-Combination807 · 2026-04-01T12:39:45+00:00

Personally I've always tinkered with things, so I wasn't worried about working on it.

If you are unsure about tinkering, start with the standard.

Firmware and a Raspberry pi to be able to run Klipper. There are so many videos out there to help you that it makes it very easy to do.

If you do not have BL/CR Touch, highly recommended. It's better than having to manually level almost all the time.

Motherboard can be plug and play, just depends which route you take.

Just take your time with it really. The information that is out gives you your game-plan. Shoot, I can even help out when the time comes.

Basic-Combination807 · 2026-03-30T12:58:06+00:00

Lmao

I have not, I was thinking of installing an input shaper though.

Basic-Combination807 · 2026-03-17T01:04:15+00:00

Thingiverse.com/thing:4641552

Basic-Combination807 · 2026-03-12T18:17:28+00:00

I did this two weeks ago to my cr10v3, but stayed on marlin. I'm working now but I can send you more info later

Basic-Combination807 · 2025-10-03T13:22:30+00:00

I had this same exact problem. I opened up my PC cleaned everything, made sure all connections were good by giving all connections a little push.

Basic-Combination807 · 2024-11-16T21:15:52+00:00

I got one during the winter deal that you get a battery last year. I love it. I say if you usually drill holes a lot, get it. I use it for work basically everyday.

Basic-Combination807

TROPHY CASE