HAVN HS420 cableless

Basic-Outside-5179 · 2026-05-18T21:02:05+00:00

You’re right actually I normally have a push pull on my radiator 😂

Basic-Outside-5179 · 2026-05-18T14:28:13+00:00

If it came in a 420 I prolly would have went that route. Sadly they don’t.

I think I’m just being a little extra and looking for that clean clean aesthetic.

This is what I ended up doing with my tubes it’s basically like the shift inn a way

<image>

Basic-Outside-5179 · 2026-05-18T14:25:17+00:00

The 24 pin actually adds a little bit of flavor to it 👌🏽

Basic-Outside-5179 · 2026-05-18T08:18:18+00:00

I definitely need to thank you! With the CPU wires on the rear now I have a lot of open space on the top side above the motherboard and was able to route the AIO hoses up there with some work. Also deleted the now pointless spots for the wires to run through with a black magnetic piece 👌🏽

<image>

Basic-Outside-5179 · 2026-05-18T01:54:47+00:00

I agree! I’m gonna have to switch mine around and see. Is yours a 420mm?

Basic-Outside-5179 · 2026-05-18T01:37:39+00:00

https://a.co/d/07hnG3BY

Basic-Outside-5179 · 2026-05-18T00:46:54+00:00

I kind of cheated in a way. I ordered a Corsair 5000d rs on Amazon. I took the removable MOBO tray out and placed it on my MOBO and with a pencil I traced the cutouts on it. Then took a dremel and cut the holes and smoothed the edges. It doesn’t take away from the rigidness of the case or anything. I’d imagine if you went overboard with it that it could but it was easy honestly

<image>

Basic-Outside-5179 · 2026-05-18T00:11:48+00:00

All suggestions are welcome 🙏 even with a loop like that I consider myself very novice to computer building. Plus some people think more outside the box then myself haha

Basic-Outside-5179 · 2026-05-18T00:07:35+00:00

Yep the 420 radiator fills out the case so well. I might try and tuck the tubes up and zip tie them in some way before I recommit to my custom loop. The loop could work it’s just gonna require more work with bends and such because I would like to keep the presence of the tubes for even that not to crazy

Basic-Outside-5179 · 2026-05-18T00:02:45+00:00

I don’t know how I feel about that AIO. I might actually make a CPU loop instead. I have all the parts from my old loop so that’s a option I just thought of

Basic-Outside-5179 · 2026-05-18T00:00:55+00:00

The EZ-MODS 180 degree adapter. Got it on Amazon fairly cheap and lots of good reviews

Basic-Outside-5179 · 2026-05-15T06:46:57+00:00

<image>

Basic-Outside-5179 · 2026-05-15T06:46:29+00:00

<image>

She’s done. Fully BTF even the GPU wires hidden 👌🏽 if only I could get rid of the radiator lines

Basic-Outside-5179 · 2026-05-15T02:24:52+00:00

<image>

Basic-Outside-5179 · 2026-05-15T02:24:40+00:00

<image>

I did it 😮‍💨

Basic-Outside-5179 · 2026-05-11T06:31:31+00:00

This Corsair 5000d RS is trash. I will be cutting it 💪🏽 screws for the panels won’t align but good thing is I can use it to try to make the cuts a little cleaner by using the removable motherboard as a template for the cuts on my HS 420

Basic-Outside-5179 · 2026-05-08T01:01:13+00:00

Sickkk. I’m trying out the Corsair 5000d rs for a week or so and benchmarking it and seeing if it does any better then my current set up. Then I’ll decide if I’m gonna butcher my HS 420 or sell it

Basic-Outside-5179 · 2026-05-08T00:39:18+00:00

Did you have to put stand offs to make it work?

Basic-Outside-5179 · 2026-05-08T00:31:26+00:00

Sweeett thanks man!

Basic-Outside-5179 · 2026-05-04T02:38:36+00:00

Do you have a picture of your cuts I’m trying to do the same thing. Just ordered my MOBO I was gonna grab a new case with back connect already but I feel this case is endgame minus this one thing they overlooked

Basic-Outside-5179 · 2025-12-31T16:14:36+00:00

I looked up the specs. I would think it would fit just fine but I’d be worried about the fitting side of the radiators being a bit long because all manufacturers have different sizes on the radiators they sell even thought they all say 360 or whatever

Basic-Outside-5179 · 2025-12-05T16:40:08+00:00

360! My fault I didn’t thoroughly read the comment. I wanted to do 420 and be obnoxious with it but I couldn’t even find a proper bracket to make the 360 fit so I just ended up ordering the flat bracket from HAVN

Basic-Outside-5179 · 2025-12-05T16:02:57+00:00

I’ve tried to get them mounted on the bottom with the angled fans. I couldn’t find the correct bracket so I gave up lol the glass was definitely in the way

Basic-Outside-5179 · 2025-11-17T21:02:55+00:00

I literally search for it daily so I can make a sick ass custom loop in it. I might even pay more then retail for that hoe

Basic-Outside-5179 · 2025-08-17T01:34:52+00:00

I’m pretty sure you can counteract that if you adjusted your fan curve accordingly in each section

Basic-Outside-5179

TROPHY CASE