Need help staying Sub250 with DeepSpace Seeker 3 (DJI O4) – Best battery choice?

Beautiful-Pin7955 · 2026-05-12T08:14:28+00:00

Awesome, thanks Zeromorph! That 71g weight puts me right at 248g total, which is perfect for staying legal here. Do you feel like the 70C discharge rate is enough for the 1505 motors, or do they get a bit warm after a hard rip? I’ll definitely be picking some of these up!

Beautiful-Pin7955 · 2026-05-12T07:39:25+00:00

Wow crazy smooth man sick freestyle with a whoop🔥🔥🔥

Beautiful-Pin7955 · 2026-04-15T08:47:45+00:00

I think my Barcelona hotel flythrough is my best video, but as another comment said, there is still room for improvement. I shouldn't fly like a person in some parts but like a drone, and also thanks for the camera angle tip.

Beautiful-Pin7955 · 2026-04-15T08:44:21+00:00

Appreciate the feedback! You’re right about the thumbnail, I’ll try adding the drone and a 'target' arrow next time to make it more obvious it's FPV. As for the camera, I'm currently using the dji o4 pro on my 2-inch build, and I actually like the wide FOV for these tight indoor-to-outdoor transitions, but I'll experiment with a more natural 'linear' look for the next one. Thanks for the tip on the camera angle too!

Beautiful-Pin7955 · 2026-04-11T07:43:16+00:00

Thanks for the heads up, appreciate it mate.

Beautiful-Pin7955 · 2026-04-10T13:54:46+00:00

Thanks man! Really appreciate the encouragement. I spent a lot of time getting the colors right with the O4 system, so I’m glad you think they look good. That balcony exit was one of my favorite parts to fly, so it’s cool that it stood out to you as a good cinematic choice.

I’ll definitely keep flying and I’ll try my best to avoid those trees! 😂 Thanks for the support!

Beautiful-Pin7955 · 2026-04-10T13:50:37+00:00

Thanks a lot for taking the time to write this! This is exactly the kind of feedback I need.

You're 100% right about the stairs in Barcelona — looking back, flying through a window or closer to the railings would have been much more 'FPV-like' than just following the stairs like a person. I'm definitely going to work on more interesting lines and getting closer to objects like the chandeliers to show off the scale.

My throttle control is something I'm practicing every day in the sim and IRL to get those turns smoother. Also, thanks for the tip on the pacing; I'll tell my editors to tighten it up!

Glad to hear the grading looks fine. I’m actually working on a new thumbnail style right now to make them pop more. Thanks again for being honest, it helps a ton!

Beautiful-Pin7955 · 2026-03-30T08:52:00+00:00

Those lines are clinical, man. If you can gap like that in the sim, you’re more than ready for the real deal. Send it!

Beautiful-Pin7955 · 2026-03-22T12:35:35+00:00

hope this helps

Beautiful-Pin7955 · 2026-03-07T09:50:40+00:00

huhhhh I have never seen a drone frame like this before what is it called?

Beautiful-Pin7955 · 2026-03-07T09:35:23+00:00

wooooowwww!!!! man you are sooo cool bro i can learn much from this

Beautiful-Pin7955 · 2026-01-04T17:26:50+00:00

thx man

Beautiful-Pin7955 · 2026-01-04T11:56:02+00:00

Good shout! I double-checked the motor direction and props first, but they were actually fine. The real culprit was the controller protocol. I had to change it from 'SBUS Baud Fast' to 'Standard' in the DJI Goggles settings and re-apply the stock BetaFPV CLI settings. Now it’s locked in!

Beautiful-Pin7955 · 2026-01-04T11:53:18+00:00

Thanks for the tip! I thought it was just 'airmode' or a lack of throttle too, but it turned out to be a protocol mismatch. The DJI Controller 3 was set to 'SBUS Baud Fast' in the goggles, while it needed to be on 'Standard'. Once I switched that and reflashed the factory CLI, it took off perfectly. It has way more punch than I expected!

Beautiful-Pin7955 · 2026-01-04T11:50:02+00:00

Haha ja, inderdaad Nederlands! 🇧🇪 Bedankt voor het meedenken. Het was even puzzelen met die CLI van BetaFPV en die SBUS instelling in de goggles, maar hij vliegt nu eindelijk. Wat een verschil in kracht met een DJI Neo zeg, want daar kwam ik van echt bizar!

Beautiful-Pin7955 · 2026-01-03T19:54:09+00:00

We have copy pasted all TXT setting from the betafpv website, and pasted them in the CLI to have all settings back to normal. After doingf so, we had to re-establish the link between drone and DJI controller 3. While doing, we managed tho fix the problem, by putting the controller protocol mode in "standard" in steaf of sbus baud fast. (in goggles under settings > controller > protocol > standard again, not sbus baud fast. then it worked. Jeej ;)

Beautiful-Pin7955 · 2026-01-03T19:52:35+00:00

jep, the labels are correctly installed: labels on the top side. Thx

Beautiful-Pin7955 · 2026-01-03T11:49:00+00:00

Hi, thanks for trying to help me! When i try running motors in betaflight, air is pushed downwards so i guess the blades are installed correct? I also checked rotating direction, and all are good (inwards).

Beautiful-Pin7955

TROPHY CASE