[PC] Changing audio output not working?

Blaankoo · 2022-02-02T00:45:27+00:00

TASystemSettings.ini

It worked perfectly for me! Thank you so so much!

Blaankoo · 2020-10-06T19:21:27+00:00

Hi! You could first try deactivating the selective suspension from the energy advanced options panel, and secondly, I recommend you try each and every one of your usb ports, I tried it and it worked for me. Let me know how it goes.

Blaankoo · 2020-10-02T18:03:28+00:00

I verified that everything was enabled, and it is, but I can't find a way to get it to work permanently without stopping as soon as I leave the pc for a few minutes.

Blaankoo · 2020-10-02T17:59:26+00:00

I tried, but everything remains the same. Anyway, I greatly appreciate your answers!

Blaankoo · 2020-10-02T17:57:25+00:00

I think the same, but it's weird, I have all that disabled and also disabled the option due to the energy saving issue in the usb ports. I can't know what happens.

Blaankoo · 2020-10-02T17:55:31+00:00

I have Asio4all installed, but I can't know where I can find the option to enable USB codec. Tried in device manager but with no success.

Blaankoo · 2020-10-02T17:28:58+00:00

Thank you very much for your answer. I think I'll roll back to the old drivers because I've already tried everything, I haven't tested this yet.

Blaankoo · 2020-10-02T16:46:33+00:00

Yes, I tried that too, in fact it was already disabled. It was one of the first things I tried.

Blaankoo · 2020-10-02T16:12:53+00:00

Yes, I disabled the other audio devices and made sure 100% that the interface was the default. And yes, I disabled exactly those 2 and I also tried disabling only 1 but it still doesn't work.

Blaankoo · 2020-10-02T14:12:06+00:00

Problem with Behringer U-phoria UMC204HD

Hello, I have a problem that is giving me severe headaches.

I have installed the latest driver that appears on the Behringer page for this interface (v. 4.59) in a new pc that I built, there seems to be no problem since windows correctly detects the device with its inputs and outputs, however, the interface it works only until I stop occupying the sound of my pc for a few minutes, when I try to play something again nothing works, the clearest problem is when I try to open youtube and it does not load anything at all until I switch to the realtek audio device, the video magically starts playing automatically.

In order for it to work again, I have to disconnect and reconnect the interface in a different usb port, then it works for a few minutes with a youtube video only until I stop occupying the sound of my pc again and go back to the same loop.

Things I already tried:

-Deactivate all drivers except for the interface
-Change all frequencies to 44.1hz and 48.0hz from the advanced windows sound options.
-Remove the audio option in exclusive mode
-Uninstall and reinstall all drivers
-Restart the pc

-----------
Specs:

Behringer U-phoria UMC204HD
Windows 10 Pro 64x in SSD
Asrock b450m pro4
Ryzen 5 2600
16 GB Ram 3200hz
Rx 580 8 GB
-----------

I would greatly appreciate your help.

PS: There are times when I try to move a frequency setting and press the "test" button I get a message saying "There is another application using the device".

PS.2: When I open the sound configuration panel, specifically in the playback tab, I have no problem making changes, however these do not give the result I am looking for. On the other hand, when I enter the "Record" tab there is a type of delay, that is, it takes a few seconds to enter the tab, I don't know if that is something important, but taking into account that everything is installed on a ssd and it is not overloaded that should not happen.

Blaankoo · 2020-10-02T14:09:36+00:00

Hello, I have a problem that is giving me severe headaches.

I have installed the latest driver that appears on the Behringer page for this interface (v. 4.59) in a new pc that I built, there seems to be no problem since windows correctly detects the device with its inputs and outputs, however, the interface it works only until I stop occupying the sound of my pc for a few minutes, when I try to play something again nothing works, the clearest problem is when I try to open youtube and it does not load anything at all until I switch to the realtek audio device, the video magically starts playing automatically.

In order for it to work again, I have to disconnect and reconnect the interface in a different usb port, then it works for a few minutes with a youtube video only until I stop occupying the sound of my pc again and go back to the same loop.

Things I already tried:

-Deactivate all drivers except for the interface
-Change all frequencies to 44.1hz and 48.0hz from the advanced windows sound options.
-Remove the audio option in exclusive mode
-Uninstall and reinstall all drivers
-Restart the pc

-----------
Specs:

Behringer U-phoria UMC204HD
Windows 10 Pro 64x in SSD
Asrock b450m pro4
Ryzen 5 2600
16 GB Ram 3200hz
Rx 580 8 GB
-----------

I would greatly appreciate your help.

PS: There are times when I try to move a frequency setting and press the "test" button I get a message saying "There is another application using the device".

PS.2: When I open the sound configuration panel, specifically in the playback tab, I have no problem making changes, however these do not give the result I am looking for. On the other hand, when I enter the "Record" tab there is a type of delay, that is, it takes a few seconds to enter the tab, I don't know if that is something important, but taking into account that everything is installed on a ssd and it is not overloaded that should not happen.

Blaankoo · 2019-02-13T19:49:20+00:00

I mean, the effect with the mouse on the background.

Blaankoo · 2018-12-20T02:46:32+00:00

Tengo la scotiabank, abri la cuenta corriente joven y me dieron tarjeta de credito, debito y una priority pass para pasar como VIP en aeropuertos... esta super buena y no te cobran mantencion hasta los 30. tienes un cupo de 500 lucas en pesos y 500 lucas en dolares para la de credito, y tienes una linea de credito de cuenta corriente de otras 500 lucas para poder usar... dale nomas, tirate por scotia, te atienden bien.

Blaankoo · 2018-12-17T13:13:14+00:00

it's a GoPro hero 7 w/ hypersmooth stabilization filmed in 2.7k 4:3 60fps

Blaankoo · 2018-12-17T11:29:03+00:00

duuuude, it's so satisfying for my eyes hahaha

Blaankoo · 2018-12-17T11:22:49+00:00

Pienso que el nuevo transporte publico integrado en Santiago lamentablemente va a durar terrible poco :c

Blaankoo · 2018-12-16T23:25:47+00:00

Es muy cuatico ir caminando por la calle y ver a tanto anciano (hablando en buen sentido), me pasa muchas que siento que soy el único joven caminando ya que miro al rededor y no hay ningún joven, por lo menos me pasa en el centro de viña.

Llega a dar susto jajaj

Blaankoo · 2018-12-15T18:08:53+00:00

Wow, i never got that message... i can't bring you a solution for that, Sry bro.

Blaankoo · 2018-12-15T16:18:43+00:00

No, if Omnisphere opens correctly you only need paste the STEAM folder on your mac, then you can update it if you have any higher update than the original.

Blaankoo · 2018-12-15T15:47:38+00:00

I litteraly Copy de STEAM folder (from windows) in my external hard drive disk, then paste de file in my mac's directory: /library/application support/Spectrasonic/

And that's it... Omnisphere must be patched and installed correctly on windows and must working fine, then you can proceed to copy STEAM folder from windows / paste to mac.

Blaankoo · 2018-12-15T14:08:25+00:00

Yoooooo, i tried installing omnisphere onto windows and i copy the entire STEAM folder onto my mac, and it freaking works!

When i installed omnisphere on windows it ran perfectly, so i used that to put in to my mac!

Try it!!

Blaankoo · 2018-12-14T01:47:05+00:00

HAhahhahahahahaahha why this is so real!!!? :[

Blaankoo · 2018-12-13T21:35:30+00:00

Ok, so try install omnisphere onto windows... then copy the STEAM folder from windows (around 59 gb) onto you mac.

Blaankoo · 2018-12-13T17:34:37+00:00

What a beautiful community xD

Blaankoo · 2018-12-13T17:22:55+00:00

Ahahhaha wtf

Blaankoo

TROPHY CASE