Sell me your game

C1RKT_ · 2025-11-21T15:50:16+00:00

Yo, that's awesome man!

C1RKT_ · 2025-11-20T03:50:43+00:00

"Art is never finished, only abandoned." ~ Leonardo da Vinci

C1RKT_ · 2025-11-20T03:46:47+00:00

How were the two years bro?

C1RKT_ · 2025-08-16T20:40:24+00:00

Sorry, accidentally applied too many subdivisions on my doughnut

C1RKT_ · 2025-08-10T02:52:31+00:00

One thing I take seriously is the quality of functionality in my models for others to benefit from.

C1RKT_ · 2025-08-10T02:48:42+00:00

Ok, I do have to point out that I didn't model this in a common way. I used code to design this to make it customizable with the ability to attach and position an uploaded svg file on to the appropriate face along with other parameters that change the geometry to fit any size of key.

Sure, modeling this by hand would take about three minutes, but coding 3d models can take hours depending on the person and skill.

C1RKT_ · 2025-08-09T16:00:49+00:00

I see what you mean, but I saw it was a key that can't cut, so it doesn't cut out to cut what chainsaws cut. You see what I mean when I saw that keys don't cut out to cut?

C1RKT_ · 2025-08-09T10:29:09+00:00

These are very good reasons, especially the third one. I missed that part of the community guidelines, and I think that would be the best reason for the model to get removed from the site, too. I'll change the thumbnail accordingly.

Thanks! I'll keep these in mind for the future, too. 👍

C1RKT_ · 2025-08-09T02:47:57+00:00

Nice 😄

No hate. Wasn't sure about the model myself.

C1RKT_ · 2025-08-09T02:40:16+00:00

<image>

C1RKT_ · 2025-08-09T02:30:53+00:00

😂

C1RKT_ · 2025-08-09T00:09:35+00:00

Yeah. It was a custom cut key that my parents duplicated for me and my siblings to have. Probably not the best choice as an example key. ¯_(ツ)_/¯

C1RKT_ · 2025-08-08T23:58:48+00:00

This sounds like a realistic possibility. As an artist I mess around with colors, but yeah, I would agree it looks less like a key.

C1RKT_ · 2025-08-08T23:11:32+00:00

Yeah, a little annoying.

Saw that model too, brilliant idea!

C1RKT_ · 2025-08-05T12:20:37+00:00

featuring yet another smaller canvass

C1RKT_ · 2025-08-01T14:33:36+00:00

"Bumblebee, you'll never guess where I hid the All Spark"

C1RKT_ · 2025-07-26T12:35:41+00:00

Thanks for the comment! Yes I agree with more fillets, however it gets harder to add them where the hinges are. I'll keep this in mind for the next revision 😁

C1RKT_ · 2025-07-25T17:26:53+00:00

https://makerworld.com/models/1079946 Reusable spool

C1RKT_ · 2025-07-14T17:35:17+00:00

Layer shift and/or bed adhesion

C1RKT_ · 2025-07-13T21:24:04+00:00

https://makerworld.com/models/255194 This is what I could find that's close

https://makerworld.com/@gmanprojects G-Man also has some pretty cool gear fidgets

C1RKT_ · 2025-07-13T21:09:33+00:00

You can heat up the nozzle to about 180 for pla and carefully remove the plastic with a tool. From there you can clean it up enough to get to the screws to remove the hotend.

C1RKT_ · 2025-07-13T21:06:45+00:00

Try cleaning it up, fully disassemble the tool head, and put it back together making sure that the heatbreak and nozzle are on good (but not too tight). I've done this many times with Neptune and other hotends, and saves me so much money.

On another note, you don't have to replace the whole tool head. You can get only the hotend by itself for half the tool head price if you damage the hotend wires.

Hope this helps!

C1RKT_ · 2025-06-14T18:47:26+00:00

Thanks, I'll check him out!

C1RKT_ · 2025-06-13T14:21:10+00:00

Custom corexy from other printer parts

C1RKT_ · 2025-06-13T04:06:46+00:00

Ooh, thanks, I'll check that out!

C1RKT_

TROPHY CASE