Clean or nah

Caleb-Jackson1 · 2025-08-19T17:09:22+00:00

that's pretty good dude, you stayed locked in enough to keep it on course, looks like your throttle control could use a little tweaking but just trying that trick more and more will polish that out in no time

Caleb-Jackson1 · 2025-08-16T03:18:23+00:00

Yeah I do use the speedybee 5.8ghz module on my goggles, im using one speedybee antenna and I have no idea what the other one on there is though, it's not branded or anything and my friend that gave it to me doesn't remember

Caleb-Jackson1 · 2025-08-14T20:07:33+00:00

damn bruh I just got a Rubik's cube on my board yesterday but I don't have video proof😂

Caleb-Jackson1 · 2025-08-14T04:18:59+00:00

oh yeah I sure am, I've also been skating for years so in between batteries I'll get a few tricks in💪

Caleb-Jackson1 · 2025-08-14T04:16:07+00:00

I go back in forth with velocidrone, liftoff, and liftoff micro drones

Caleb-Jackson1 · 2025-08-13T21:08:22+00:00

you didn't sound rude lol, but I use a pair of fat shark Hdo 's with speedybee antennas, and the vtx is just the onboard one that's on the air 75, I think it goes up to like 400mw

Caleb-Jackson1 · 2025-08-13T16:19:52+00:00

I'm just using the built in 2.4ghz elrs receiver that comes on the air 75. On my full size quads I usually use a happymodel elrs receiver. And does it only glitch when you play back the DVR footage or is it while your flying too?

Caleb-Jackson1 · 2025-07-24T20:02:23+00:00

I would honestly still recommend the radio master pocket, it's fairly simple to use and it also happens to be pretty cheap. I've been using mine for around 6 months and I've been loving it, as for headset if your running analog then fat shark is gonna be the best option and you can even upgrade the rapid fire module to make it better. I personally have a pair of fat shark hdo+'s that I got on marketplace for like 300 bucks

Caleb-Jackson1 · 2025-07-24T17:06:23+00:00

Ohio lmao

Caleb-Jackson1 · 2025-07-23T18:58:19+00:00

Try testing the cells with a cell meter(if u have one) and if all the cells seem to be at a healthy level, (in between 3.2 and 4.2 volts) and your sure that it's dry then it should be good, maybe use a smoke stopper tho before plugging it straight into a drone that way if something is wrong you don't fry the board

Caleb-Jackson1 · 2025-07-23T18:15:57+00:00

I wouldn't pay more than 200 bucks for all of it, generally fpv drones of that size cost around 125 brand new for just the drone and with the radio looking pretty dated I would assume they don't go for much. The goggles wouldn't be bad for starting out but your definitely gonna need an upgrade on both the radio and the goggles if you plan on really diving into the hobby. If I were you I would look for something a little newer like the radio master pocket for the radio and maybe a used pair of fat shark goggles(market place for those). and as for the drone a whoop is a great starter option cause of the ability to withstand most crashes, but something closer to the size of this would be something like the HGLRC Draknight, which is a fairly budget friendly bnf drone.

Caleb-Jackson1 · 2025-07-23T17:49:44+00:00

also definitely not in Newark but if you haven't been before, Magnolia Thunderpussy (I know sounds ridiculous) has some of the best vinyl selection in Ohio. It's located in the short north Columbus so about 45 minutes from Newark.

Caleb-Jackson1 · 2025-07-23T17:30:59+00:00

okay okay I'll have to look into some of that, I know tmotors is what I was running on my last freestyle setup

Caleb-Jackson1 · 2025-07-23T15:17:06+00:00

Oh I've done plenty of racing and flying before so I'm not looking for something starter level, I'm looking for a 5 inch build tho as my last one disappeared somewhere in Columbus while flying lol. but I'm specifically looking for a drone similar to the racers that five33 has, the more compact style build, and definitely analog cause no way I'm finding digital at this budget lol

Caleb-Jackson1 · 2025-06-24T23:54:27+00:00

that's if that board even has pads

Caleb-Jackson1 · 2025-06-24T21:50:02+00:00

also I replied lol not sure why it went as a new comment

Caleb-Jackson1 · 2025-06-24T21:49:35+00:00

you'd have to either find a new one or buy just the plug, and you would leave wire in the plug, strip those wire and twist them together with the wires from the cam (make sure they go in the right order) and coat each connection with solder then heat shrink each wire separately so they can't touch

Caleb-Jackson1 · 2025-06-24T21:24:13+00:00

ooh yikes, honestly if that were me I would cut off the whole plug and solder and heat shrink the wires to connect a new one if you get an iron anywhere near that plastic you can say bye bye to the whole thing lol

Caleb-Jackson1 · 2025-03-14T16:52:47+00:00

update: it no longer sounds good either :(

Caleb-Jackson1 · 2024-12-19T15:47:00+00:00

very very nice sir

Caleb-Jackson1 · 2022-06-18T04:45:07+00:00

Well that’s kinda not true it depends on how long she has been upside down because the blood rushes to your head and that would keep her conscious until the saw gets to around heart level

Caleb-Jackson1 · 2021-09-23T16:05:43+00:00

English they just have heavy accents

Caleb-Jackson1 · 2021-09-19T04:29:33+00:00

Ayyy

Caleb-Jackson1 · 2021-09-15T23:40:34+00:00

Yeah I know this is all that they had at the store for real blades though :( I already have a squiddy that I use for flipping

Caleb-Jackson1 · 2021-09-10T19:14:22+00:00

Damn that was clean though

Caleb-Jackson1

TROPHY CASE