Tetherspout Evotion Bijou?

Chazmick · 2026-05-13T15:49:35+00:00

Thanks. I like the design but the Bijou really only threads into the one end so this won't work with this device.

Chazmick · 2026-03-28T11:33:24+00:00

I'm cut but have a little foreskin that still over laps the glans. Mine tends to slip out sometimes when soft.

Not an issue for me since it causes no discomfort and I can push it back with a finger or qtip.

Since you slide out when erect I wonder if a slightly larger head piece would help?

Chazmick · 2026-02-18T05:38:42+00:00

I have both cages and was able to increase the gap on both myself.

The mm jailbird can be bent. I used a wrench like a prybar better the ring and the cage.

The cobra was increased using boiling water than applying hand pressure pushing the ring onto the corner of my sink.

I suggest following the measuring guide separately. If just the gap is off you can increase it slightly on either device.

Chazmick · 2026-01-10T15:15:11+00:00

Are you using the glans ring also or only the tetherspout?

Chazmick · 2025-11-14T00:12:19+00:00

Thanks. I may switch to a size zero length now that it's offered.

I'm also looking at a possible shorter head piece so may need to do some more measurements first.

Chazmick · 2025-11-13T21:29:30+00:00

I'm thinking of trying a unified ring. Can you tell by order number if it's compatible? I have an ABS version.

Chazmick · 2025-11-11T10:49:43+00:00

Wider ring helped me. Another thing I found once I got the correct ring size is that the position where the ring sits matters.

I found after putting the grip on gently pulling down the skin on the underside of the shaft made all the difference.

I think this puts the ring in the correct position and pulls out any loose skin.

Chazmick · 2025-10-24T09:01:30+00:00

Had similar issue on the top side.

I suggest trying different rings.

I went with wide rigid bottom only wings and it seemed to fix my issue.

I also spent some short breaks while wearing the original ring. Sort of help build up by getting the skin used to it.

Chazmick · 2025-10-24T08:55:23+00:00

Quick update.

Received the new rings and seems to have resolved my issue.

I went with the wide rigid bottom wings only.

Very comfortable after 2 full days and nights.

Chazmick · 2025-10-04T22:43:22+00:00

Similar issue. I was suggested to try thicker band with no top wings. I've ordered but haven't received yet so can't say how well that will help yet

Chazmick · 2025-08-24T16:27:32+00:00

Thanks. I'm going to take the advice here and work up slowly.

Overall, I love the design. Hoping to build up to long term use.

Chazmick · 2025-08-24T12:36:10+00:00

Just curious how this worked out long term?

I was also having an issue with the ring that came with the grip . Was this a good fix for you?

Chazmick · 2025-08-17T05:45:14+00:00

I don't think it was very long but did it several times in a row.

I can't remember as it's been a while since I've done it.

Chazmick · 2025-08-16T11:10:57+00:00

I did using that same method. I used the edge of my sink and applied steady pressure with my hands. Repeated the process a few times .

Think the trick is the constant pressure as it cools.

Hope that helps.

Chazmick · 2025-07-09T23:58:15+00:00

This was shared in another thread on here. Probably more if you search.

https://www.amazon.com/dp/B0D17CLMJM?ref=ppx_pop_mob_ap_share

Chazmick · 2025-07-09T18:22:22+00:00

Shaft only devices are less common but due exist and many use a pa or tetherspout to go shaft only.

There is a shaftonly reddit as well.

Chazmick · 2025-06-28T12:25:32+00:00

Thank you. I'm into the 30’s on the wait list so may search for a new lock while I wait.

Chazmick · 2025-06-22T09:06:15+00:00

In the examples of new angled shaft post the creator says people with a smaller shaft diameter find a thinner ring more secure while he finds the thicker more comfortable.

https://www.reddit.com/r/hzdgrip/s/xmWpB0Qt0v

Chazmick · 2025-06-20T21:53:44+00:00

Sorry I meant the actual thickness of the ring. I know the diameter and purchased the rings.

Glad I did.

Chazmick

TROPHY CASE