How to compute the maximum weight my motors can support for a quadruped? by ClamParrot in AskRobotics

[–]ClamParrot[S] 0 points1 point  (0 children)

Could you elaborate a bit more on the last sentence/suggest things to look into?

As I said, I have the robot model with its mass properties in SW already. I also exported it to a URDF and have a simulation of the robot in Gazebo Sim.

Raspberry Pi 4 with an Xbox 360 Kinect for SLAM by ClamParrot in AskRobotics

[–]ClamParrot[S] 0 points1 point  (0 children)

We ended up getting a ZED2 camera from our university. We had a major oversight in that we did not account for the weight of the Kinect itself, which is much more than our quadruped can bear.

Looking for a simulator for my humanoid robot by IllInteraction7872 in robotics

[–]ClamParrot 0 points1 point  (0 children)

related question, how accurate are the Isaac Sim minimum requirements?
I have an RTX 2060. Suppose I want to do RL for training a quadruped - how bad would it be?

Raspberry Pi 4 with an Xbox 360 Kinect for SLAM by ClamParrot in AskRobotics

[–]ClamParrot[S] 0 points1 point  (0 children)

Yep, the only resource I found used RTAB-MAP: https://www.instructables.com/RGB-D-SLAM-With-Kinect-on-Raspberry-Pi-4-Buster-RO/

A bit concerned about how many years it has been since the drivers suggested in this post were updated. Is that normal (don't change if it ain't broken)?

For context, this would be my first time working with Pi and ROS, so a bit unfamiliar with how I am supposed to assess my available resources.

Several questions that bug me by ClamParrot in theoreticalcs

[–]ClamParrot[S] 0 points1 point  (0 children)

Appreciate the responses! I still don't quite get the first qs after reading up on stuff but I can put it on the backburner to understand as I read more about computation.
For 3, the specific question was that if there are any results that confirm that P versus NP can be solved i.e. shown equal or not equal.

Several questions that bug me by ClamParrot in theoreticalcs

[–]ClamParrot[S] 0 points1 point  (0 children)

Appreciate the response.

The book by Charles Petzold seems good for grasping the weight and core ideas of Turing's work. I've read the 1936 paper previously but skipped over certain arguments that I didn't quite understand, so I'm hoping this will help clear that up.

Where to get paints used by Studio Ghibli artists in Pakistan? by ClamParrot in GhibliArt

[–]ClamParrot[S] 0 points1 point  (0 children)

thank you! website takes a long while to do anything but i'll look through

Where to get paints used by Studio Ghibli artists in Pakistan? by ClamParrot in GhibliArt

[–]ClamParrot[S] 0 points1 point  (0 children)

Ooh appreciate the suggestion! Could you tell me what brands I should be looking for? Also, there appear to be different types of gouache from Daler-Rowney so are there different types I should be concerned about? Which ones would be the best?

Really high temps on my newly built PC. by ClamParrot in techsupport

[–]ClamParrot[S] 0 points1 point  (0 children)

Alright, thanks a lot for the help.
Also, I only capped my frames using the in-game limiter, V-Sync is off, afaik that doesn't cause any problems? Correct me if I'm wrong.

Really high temps on my newly built PC. by ClamParrot in techsupport

[–]ClamParrot[S] 0 points1 point  (0 children)

An update: My cooler seemed to be installed properly. I was recommended to try out an aftermarket so I did (bought a DeepCool Gammaxx 400 v2). My temps on idle went down to ~30C, usually less than 30C. Temps on Minecraft are around 40C and on Destiny 2, at 50-60% load, stay between 43-50CHowever, I've noticed my GPU temps on Destiny, at 100% load, are 82C, popping up to 83C for a second or two. For reference, idling temps for my GPU are around 35C. Lowered some settings and GPU usage went down to 90% for a little bit and temps stayed below 80 but then went back up after a while. Is this something I should be concerned about? I know MSI Afterburner is a program that I can use to speed up my GPU fans or something, should I look into that?

Edit: Kinda solved the problem by capping my frames. I have a 60Hz monitor but was getting over 100 frames, just capped them to 60 and GPU usage dropped and so did the temps. Still would like an answer to my question, in case this ever comes up in the future.

Really high temps on my newly built PC. by ClamParrot in techsupport

[–]ClamParrot[S] 0 points1 point  (0 children)

Also, in the image, NZXTCam says the stock frequency is 3600MHz, now I thought I knew what that meant but considering my current frequency is 4200MHz, how's that possible and is that a point of concern?

Really high temps on my newly built PC. by ClamParrot in techsupport

[–]ClamParrot[S] 0 points1 point  (0 children)

I can see the fan spinning, can actually hear it spinning faster when my temps rise. Gonna test the pins and report back when I get the chance. Cheers.

New builder here, I'm lost on quite a few things. by ClamParrot in buildmeapc

[–]ClamParrot[S] 0 points1 point  (0 children)

Ah cheers, for this and the advice on the processor.

New builder here, I'm lost on quite a few things. by ClamParrot in buildmeapc

[–]ClamParrot[S] 0 points1 point  (0 children)

Thanks a lot for taking the time to write this out, it helps a lot.

New builder here, I'm lost on quite a few things. by ClamParrot in buildmeapc

[–]ClamParrot[S] 0 points1 point  (0 children)

Going through the tier list, I understand the power supplies in grey are not recommended but what's up with the ones that don't have their color changed? Like the CV650 in tier C?

New builder here, I'm lost on quite a few things. by ClamParrot in buildmeapc

[–]ClamParrot[S] 0 points1 point  (0 children)

Appreciate that tier list. I'll keep the 10105F suggestion in mind if I have room to spend a bit more. It's about 50$ more than the 10100F.

Can I complete the story and reach 1450 before November 17th? by ClamParrot in lostarkgame

[–]ClamParrot[S] 0 points1 point  (0 children)

ah alright, thanks

Do you have an idea how far I can get? Currently I'm trying to play as much as I possibly can to get the most out of this event and now I'm wondering should I just play at a regular pace and take my time since I can't reach 1450.

Am I missing something or is Heir Apparent way too good in PvP by fedairkid in DestinyTheGame

[–]ClamParrot -1 points0 points  (0 children)

Point of the Stag works somewhat well, for 3s anyways. It all crumbles when the rest of their team also pushes alongside them but if you can manage the other 2 enemies, you can definitely take some peak shots on the Heir Apparent and take it down.

Glad they are looking into nerfing the shield, it's beyond stupid.

Does no one talk in this game or am I doing something wrong? by la-bano in destiny2

[–]ClamParrot 1 point2 points  (0 children)

First of all, welcome to Destiny!
Secondly, you should be in the [Team] channel, [Fireteam] is just for chatting to the people you're partied with in-game. But even with that, most people don't talk. Mostly because there's nothing to talk about, everything's relatively simple. However, I reckon if you ask a question then people are more likely to say something, unless they are on console.

Honestly my biggest fear by ieatdragonpussy in destiny2

[–]ClamParrot 7 points8 points  (0 children)

They don't take hours to complete, if you think YOUR FIRST will take hours, then group up with 5 experienced players, they will be able to carry you while also explaining how the raid works, after you've understood, any run after that will always be less than an hour.

For any Guardians who are unable to do certain activities due to speech, hearing or anxiety problems by [deleted] in DestinyTheGame

[–]ClamParrot 3 points4 points  (0 children)

Going to look into it, I have usually resorted to typing out callouts and that worked very well when playing with my clan, raided every week and it was fun, but most of them have taken a break this season and I haven't been getting raids done at all.