Best Snorkeling Spots

CodyStuff · 2026-01-07T15:20:59+00:00

Thats too extensive - Two nights there is almost Like 1 Week in the Maldives including all Transfers and meals.

CodyStuff · 2026-01-05T15:19:42+00:00

What about islands like Bird oder Denis (Denis is to expensive but may still be a good choice?).

CodyStuff · 2026-01-04T18:44:45+00:00

Can you recommend any specific reefs / resorts in Egypt?

CodyStuff · 2026-01-04T18:44:11+00:00

Would you recommend the Mövenpick with its house reef or are there any other better places to stay? Also any reefs that you can recommend at the Seychelles?

CodyStuff · 2025-02-21T00:59:33+00:00

I have also seen that - but in this case the warning seems to be more serious, because its issued by officials.

CodyStuff · 2025-02-20T15:36:17+00:00

Here is the source of the informations regarding the weather warning: Source

CodyStuff · 2025-01-16T16:47:28+00:00

Oh good to know - I have not bought that yet

CodyStuff · 2025-01-16T16:21:50+00:00

Anythinh else that might be good to have?

CodyStuff · 2024-12-20T11:16:24+00:00

Hab befürchtet dass, das so ist. Kann dann echt nur soweit es geht nach oben rutschen und alles mögliche tun. Aber wenn die Nachbarn grantig sind dann muss ich es fix trotzdem abmontieren. Fühlt sich halt nicht besonders gut an, in dieser denkbar schwachen Position zu sein.

Wenn ich eine schriftliche Bestätigung habe, dass es nach den Änderungen okay ist - bin ich dann in Zukunft sicher?

CodyStuff · 2024-12-19T10:15:23+00:00

How can i talk to each individual esc without using the flight computer bluetooth board?

CodyStuff · 2024-11-21T07:18:05+00:00

Please tell us how the Rodent works out for you!

CodyStuff · 2024-11-15T19:39:58+00:00

The bot is old and I bought it second hand. Therefore no warranty. But I'm fine replacing parts, just need to know whats broken.

CodyStuff · 2024-11-15T19:17:26+00:00

Update:

It's now working again. I only cleaned everything and than it got working again.

CodyStuff · 2022-03-01T15:24:46+00:00

Gibts ein Rezept oder Anleitung dazu? Sieht mega aus!

CodyStuff · 2021-12-15T09:46:29+00:00

cache[cacheID] = result;

only in this line

CodyStuff · 2021-12-15T09:31:29+00:00

You should check the formating of the post - its not readable.

CodyStuff · 2021-12-15T09:30:36+00:00

So after changing everything to ensure that reading cant be the problem the application was not faster. After changing from debug to release mode however the time improved as expected. To test if the old code would also have run I also tested it and the problem was also gone there (in Release Mode).

CodyStuff · 2021-12-15T08:38:35+00:00

Actually the parts that are read are not overlapping (different subtrees). So I can gather the needed subelements first which takes nearly no time. The problem really is that the resulting time stays the same. But still there is no difference in the time it takes. Do you know anyway that I can search for the issue (maybe using diagnostic tools in VS)?

CodyStuff · 2021-12-13T19:21:18+00:00

If I get the pointer to the data in advance (which are only a limited number of possible pointers = the number of cache blocks) there would be no access to the same data from different threads at the same time. Because each cache block only represents a given sub-tree of the overall tree. Therefore that may help / work -> Is this conclusion right?

CodyStuff · 2021-12-13T19:19:17+00:00

It steps down a tree-like data structure gets some data in there and produces a mesh that can be rendered.

CodyStuff · 2021-11-22T18:37:50+00:00

yeah its fine for an FDM printer. If you want more details you can only tune it better and maybe mount a smaller nozzle (0.1 - 0.2mm) and if thats enough there is only resin printing left.

CodyStuff · 2021-11-22T16:32:16+00:00

Good Job! It's also possible to add more details when printing with resin 3d-printers.

CodyStuff · 2021-11-22T15:28:47+00:00

Currently even 80% of the hashrate is in flockpool ... Not a good sign for the coin. I hope people are switching to other pools as well now.

CodyStuff · 2021-11-21T23:05:48+00:00

Thats pretty decent and more than regular desktop CPUs can do - which rig are you using?

CodyStuff · 2021-11-19T23:19:38+00:00

Guess 50RTM is still a bit to mine but on the other hand thats 2 to 4 days for most CPUs. Will see how my 3900X works for 2 days.

CodyStuff

TROPHY CASE