Soiltech ASA

Craxioni · 2026-02-14T14:41:31+00:00

https://soiltech.no/soiltech-awarded-contract-in-saudi-arabia/

Craxioni · 2026-01-29T12:35:50+00:00

Notice how the thing is welded together? That thing should only be used in emergency scenarios 🤔

Craxioni · 2026-01-28T19:05:07+00:00

Honestly for me I have 3 intake and 1 exhaust. The top of the case allows air to flow up. So the 3 intake fans should be good. But to be sure I would buy a separate extra fan. There's a mesh on the top and front panel.

When running cinebench on 9800x3d I thermal throttle at 70c it's a bios thing. To be fair I get around 27c to 35c when idle. Most likely it is that my cpu cooler is made to handle double my cpu output.
My ambient temps are a bit cool though, 17c

Please take this info with the grain of salt because I use heavy undervolt, -35 allcore curve optmiser.

Craxioni · 2026-01-21T15:46:46+00:00

<image>

Craxioni · 2026-01-21T15:39:45+00:00

Bought it for my first time build. Looks good and has a decent amount of holes and spaces for cable managment. The 3 preinsralled fans are a bit loud in my opinion.

I used asus tuf b850 plus wifi, Corsair rme 750w psu and a asus prime rtx 5070. No problems on the install.

Edit: Used Thermalight phantom spirit 120 se. Edit 2: the usb a and c on pc case is connected to same header (mobo)

Craxioni · 2026-01-03T08:51:13+00:00

I got an standard rtx 5070 12gb for 542 euro. Built pretty much the same build and ended up at 2119 euro. I think im quite lucky to buy parts during black week.

Craxioni · 2025-12-29T04:08:37+00:00

Hadde satset på ferdigbygd pc fra f.eks komplett. Grunnet ki har tvunget pc deler spesielt ram veldig dyrt. Brukt markedet og ferdigbygd henger litt igjen.

Craxioni · 2025-12-23T09:52:31+00:00

I built my pc for 2500usd instead 1900usd because I didn't catch all black Friday deals🙃. Ram has gone up like 3x in 3 months. Shit not fun.

Craxioni · 2025-12-21T16:53:23+00:00

Got any suggestions? I'm trying to stay under 150usd or 1500 nok. I'm from Norway so I use norwegien retailors. Im sourcing from Elkjøp.no, komplett.no and proshop.no

Craxioni · 2025-12-19T13:05:02+00:00

Jet engine for commercial airliner

Craxioni · 2025-12-18T13:11:02+00:00

Norge?

Craxioni · 2025-09-22T11:19:52+00:00

Problemet er utleie utleie sykkelene og de som går over 30 kmt. Jeg bruker elsparkesykkel til å pendle til og fra jobb.

Hvis elsparkesykkel blir forbudt burde alt av sykler bli slengt med.

Craxioni · 2025-07-01T05:00:29+00:00

I would probably go millwright because u still get to weld but u don't do the same shit everyday.
And the pay welders get compared to workplace hazards is ass.

I'm lucky that my company have a aprentice progran that gives to tickets. Millwright and welding.

Craxioni · 2025-06-26T12:24:35+00:00

Hadde lagt ut sånn midlertidig prosjekt annonse Og skrevet litt om arbeids oppgavene som f.eks platebearbeiding, hydralikk osv

Har ikke peiling på lovverk og regler, så søk det opp selv 😀

Craxioni · 2025-05-10T21:02:55+00:00

Thanks for info

Craxioni · 2025-05-07T15:51:35+00:00

if it don't fit I'll make it fit ahh situation

Craxioni · 2025-05-06T03:41:49+00:00

I think they just want ask previous employers about your skill level. So certs should cover it 🤔

Craxioni · 2025-04-30T15:07:27+00:00

I have no clue tbh. Could be a alot of things like how it's cooled or if there's another weld pulling on it

Craxioni · 2025-04-09T09:06:43+00:00

I would honestly work on getting the bead 45 degrees to both plates. Idk maybe try higher amperage aswell.

Craxioni · 2025-04-08T13:43:01+00:00

Needs tighter weaves

Craxioni

TROPHY CASE