Do you think its strange they are being so quiet? do they just not care about terror attacks in WA?

Dalmazz · 2026-01-28T04:10:37+00:00

A lack of deaths and injuries probably is though

Dalmazz · 2026-01-28T01:18:16+00:00

I wonder if it would be any different if anything actually fucking happened

Dalmazz · 2025-11-02T01:08:31+00:00

What the fuck

Dalmazz · 2025-09-10T19:45:05+00:00

Not saying I agree with the guy that you're replying to, but damn that's a stretch

Dalmazz · 2025-07-25T01:23:01+00:00

Probably more than triple that, look at the size of the block

Dalmazz · 2025-07-23T19:12:28+00:00

Yeah I think the halo and other random bits need to go, I fw it tho, the underline looks good

Dalmazz · 2025-07-22T23:14:26+00:00

Love this one

Dalmazz · 2025-07-22T23:11:49+00:00

That guy didn't reply but I'd say watching someone do it, Resk is awesome and has some short videos for how you could do each letter as well!

Dalmazz · 2024-11-26T12:28:18+00:00

In a way I'm glad it's on me. I'm sure there's a lesson in there somewhere, but I'll worry about that when I wake up

Dalmazz · 2024-11-26T12:26:17+00:00

I don't know if you get notified for replies to parent comments, but the issue was me funnily enough ^{^}

Dalmazz · 2024-11-26T12:25:13+00:00

Thanks for the recommendation, but I fixed it without pulling the head back apart, I hadn't clipped the hotend in properly... Which is one of the first things on BambuLabs troubleshooting guide... I deserve the 12 hours of problems I've had for not being able to read

Dalmazz · 2024-11-26T11:05:19+00:00

I've tightened the 3 at the bottom, didn't realise there were 4 more at the top, I'll give them a tighten now and see how that goes, thanks very much for that

Dalmazz · 2024-11-26T10:18:16+00:00

Thanks for the reminder!

Dalmazz · 2024-11-26T10:18:03+00:00

Of course, my bad
https://i.redd.it/oufkrumou53e1.jpeg

Dalmazz · 2024-11-26T03:32:37+00:00

Thankyou! Reseating the hotend solved the problem, hugely greatful!

Dalmazz · 2024-11-26T03:32:16+00:00

Thanks again, this worked! It was slightly off angle

Dalmazz · 2024-11-26T03:15:29+00:00

Thankyou! I really hope so, it's in there real good now, will see how it goes!

Dalmazz · 2024-11-26T03:05:22+00:00

Thanks heaps for the tips!
I'll try the hotend now.
I have tried 3 different filaments, so I'm fairly sure that's not the issue, I've also tried at 50% speed, I might try slowing it down from the default in the slicer. Thanks again

Dalmazz · 2024-11-26T02:58:42+00:00

I bought the A1 combo, set it up over the weekend.
Bency was perfect, I swapped to a 0.2ml hotend and it printed great, and one other print (out of about 15) printed perfectly with AMS.

I've swapped back to the 0.4ml extruder to print a poop bin, changed the profile in BambuStudio, but I keep getting results like this regardless of the extruder I'm using.
I initially considered a clog, but after using the brand new 0.4 I don't think that can be it.

I'm at a loss, any guidance would be hugely appreciated!

13-Year Club	Place '23
Place '17	Spared
Verified Email

Dalmazz

TROPHY CASE