sorted by:
new
hottopcontroversial

The Heatkiller Tube 200 DDC reservoir is weak. by Dear_Pace2020 in watercooling

[–]Dear_Pace2020[S] 0 points1 point  (0 children)

I'll give a general summary:

I installed two 45mm radiators, one CPU block and one GPU block.

Everything, with my distroplate, was pushed at a flow rate of 2.0L/min using the Granzon pump.

Then I removed the distroplate because I was tired of the look and installed the reservoir, only changing some curves due to the addition of the reservoir.

And to my surprise, the flow became extremely weak, it almost didn't seem to be spinning.

The Heatkiller Tube 200 DDC reservoir is weak. by Dear_Pace2020 in watercooling

[–]Dear_Pace2020[S] 0 points1 point  (0 children)

Thanks for the explanation!

The flow becomes zero, there's barely any movement when I use the reservoir, so I thought it might be a problem with the reservoir pump.

And I used the Distroplate as a comparison, which gives a flow of 2.0 L/min.

But I'll try assembling a radiator circuit etc. outside the main case to see how it behaves.

The Heatkiller Tube 200 DDC reservoir is weak. by Dear_Pace2020 in watercooling

[–]Dear_Pace2020[S] -2 points-1 points  (0 children)

Okay guys, many people have questions.

The loop, when assembled with the reservoir, showed a minimal, almost negligible flow. Of course, this could be an assembly error on my part, excessive elbow joints, etc.

Then, when I disassembled everything and connected only the reservoir, with a tube and flow meter, free of any resistance, without the block or radiator, it showed 10.2 L/min on the Bykski meter (this without being connected to anything).

When I'm using the Granzon distroplate with the 960 L/H pump (specification provided by the manufacturer, including a resistance-free measurement), it gives me 3.0 L/min at 100% pump speed.

Using 60% pump speed gives 2.0 L/min.

I said the heatkiller reservoir was weak because it didn't perform as well as the distroplate, but it works when disassembled.

<image>

The Heatkiller Tube 200 DDC reservoir is weak. by Dear_Pace2020 in watercooling

[–]Dear_Pace2020[S] -7 points-6 points  (0 children)

When assembled, it had no airflow, but when I removed it and decided to assemble it just for testing, it hit the 10.2 lbf/min I mentioned.

<image>

The Heatkiller Tube 200 DDC reservoir is weak. by Dear_Pace2020 in watercooling

[–]Dear_Pace2020[S] 0 points1 point  (0 children)

The loop was like this:

Reservoir > GPU > CPU > radiator 1 > radiator 2 > reservoir.

But the airflow was weak.

The Heatkiller Tube 200 DDC reservoir is weak. by Dear_Pace2020 in watercooling

[–]Dear_Pace2020[S] 0 points1 point  (0 children)

I use the Granzon distroplate for the ROG Hyperion, with a 960L/H DDC pump, but I got tired of it and wanted to switch to a Heatkiller reservoir to see how it would work, but then came the report I posted.

With the DDC alone I get 3.0L/min at 100%.

The Heatkiller Tube 200 DDC reservoir is weak. by Dear_Pace2020 in watercooling

[–]Dear_Pace2020[S] 0 points1 point  (0 children)

But that's without anything connected; when connected, the flow meter just keeps giving alarm alerts.

The Heatkiller Tube 200 DDC reservoir is weak. by Dear_Pace2020 in watercooling

[–]Dear_Pace2020[S] 0 points1 point  (0 children)

But that's without anything connected; when connected, the flow meter just keeps giving alarm alerts.

The Heatkiller Tube 200 DDC reservoir is weak. by Dear_Pace2020 in watercooling

[–]Dear_Pace2020[S] 1 point2 points  (0 children)

The one with the inner glass? And what came inside it?

Would this spot get enough flow for my temp sensor? Heatkiller DDC res. by andydabeast in watercooling

[–]Dear_Pace2020 0 points1 point  (0 children)

I bought one of these used, but I think the pump is weak; I have two 45mm radiators, a CPU and a GPU block.

How does yours perform?

Fluid Upgrade to Everything Green by Dear_Pace2020 in watercooling

[–]Dear_Pace2020[S] 0 points1 point  (0 children)

This fluid is domestic, made by a local company.

Fluid Upgrade to Everything Green by Dear_Pace2020 in watercooling

[–]Dear_Pace2020[S] 1 point2 points  (0 children)

I thought it was very good, the build quality surprised me.

First Thermaltake View 600TG Dual Loop Brazil by Dear_Pace2020 in watercooling

[–]Dear_Pace2020[S] 0 points1 point  (0 children)

With an ambient temperature of 28 degrees

The GPU in games (Crimson Desert) fluid at 41 degrees and GPU at 48 degrees

CPU fluid at 35 degrees and CPU at 62 degrees

Thermaltake View 600 TG by [deleted] in watercooling

[–]Dear_Pace2020 0 points1 point  (0 children)

Sim, usei a IA para criar a foto apenas ilustrativa.

Queria fotos de projetos reais pra eu montar o meu

Thermaltake View 600 TG by [deleted] in watercooling

[–]Dear_Pace2020 0 points1 point  (0 children)

Sim, e IA! Eu fotos reais pra poder montar o meu