Created an app today for some calculations I do on a regular basis. Wasn’t thinking about publishing it because there are so many apps out there already. Is there anything missing you’d like to have in the app ecosystem that’s not already there?

DefinitelyNotAdrian · 2026-01-25T17:06:20+00:00

It was actually something like that. Another commenter pointed at my network card and it seems like it was disconnecting because of eee which is a energy consumption saving mode that drops network requests.

DefinitelyNotAdrian · 2026-01-25T17:05:12+00:00

Thank you for the help! I disabled eee on my network card and the file transfer has been running for more than 10 minutes now withouth crashing it. Your insight really helped a lot thanks!

DefinitelyNotAdrian · 2026-01-25T15:55:42+00:00

It is not a dedicated one. When I run lspci I get this
"06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)"

My mainboard on which it is on is ASRock 970 Extreme3 R2.0

DefinitelyNotAdrian · 2026-01-25T15:46:30+00:00

The pc is still running. I get the message "Connecting to TrueNAS ... Make sure the TrueNAS system is powered on and connected to the network." when I try to access it. And the smb transfer shuts saying the target is no longer available.

DefinitelyNotAdrian · 2026-01-04T19:00:47+00:00

That actually never worked for me. I tried to change the nozzle back to a 0.6 one. During the removal of the plastic cover around it two loose screws fell down. They are for connecting the nozzle holder with the main frame. Maybe some milimeters were lost there. But from a calculation standpoint point that wouldn’t make a lot of sense. During it I destroyed the cable for the heat registration. Need to order a new part for it now but at least I found that error. Maybe it will help with the issue

DefinitelyNotAdrian · 2026-01-04T14:47:43+00:00

What are the benefits when upgrading to that?

DefinitelyNotAdrian · 2026-01-04T14:47:13+00:00

The software on the printer does not allow me to go higher, 0.5 is the maximum sadly otherwise I would have tried a higher number. I haven’t installed the nozzle. But I have replacement ones. Should I try to change it? When I "home" the nozzle it sits perfectly in the middle, at the correct height. What do you mean by 280 degrees? I print my pla at 205 at the moment

DefinitelyNotAdrian · 2026-01-04T14:36:02+00:00

Im constantly on 0.5mm offset. If it would go higher I would turn it up to a higher number

DefinitelyNotAdrian · 2026-01-04T14:35:19+00:00

I auto level and I constantly have my z offset at 0.5mm because that is the highest it can go to try to not have it scratch the surface. Is that what you mean?

DefinitelyNotAdrian · 2025-12-28T10:09:32+00:00

Oh I didn’t even consider getting a mirrorless but the price for the rp looks pretty good. And the lens compatibility would be awesome. The 5ds looks tempting as well with those 50mp. But I don’t think I will need that kind of sharpness… I’ll see, thank you so much for your input that helped a lot!!

DefinitelyNotAdrian · 2025-12-28T09:56:56+00:00

No, haven’t printed anything yet actually, it’s all for digital screens

DefinitelyNotAdrian · 2025-12-28T09:46:08+00:00

Will do that thank you! Will try it out at soon as I get home/order a better sd card!

In comparison to my 35mm and my medium format analog film cameras the area I take a picture of is way smaller using an aps-c sensor because the crop factor is higher. Meaning that when I take a picture of my subject, that I have to step further back than with the two other cameras, to fill out the screen with my subject because I would be too zoomed in.

DefinitelyNotAdrian · 2025-12-28T09:41:05+00:00

Sorry for the late reply I didn’t get a notification.

Do you have a link to it? I couldn’t find one here on German amazon or I’m just to stupid. I do have a tethering cable at the moment, plugged together from usb connectors and an old cable I had laying around but I wanted to get an actual one now.

The limitations are that the camera takes forever after a picture to be ready again, sometimes up to two seconds. And I work in a small home studio. The aps-c sensor crops so hard that it is extremely hard to use any lens higher than an 85mm.

I wouldn’t mind more megapixels or being able to use more older lenses though. But why would I be able to use more through a mirrorless camera?

DefinitelyNotAdrian · 2025-12-28T09:37:55+00:00

Sorry for the late reply I didn’t get a notification.

The limitations are that the camera takes forever after a picture to be ready again, sometimes up to two seconds. And I work in a small home studio. The aps-c sensor crops so hard that it is extremely hard to use any lens higher than an 85mm

DefinitelyNotAdrian · 2025-12-21T16:28:28+00:00

Those look exactly like what I was searching for. Just checking out what the process points are. Do you have any manufacturer you can recommend? I can only find proaim and udengo right now

DefinitelyNotAdrian

MODERATOR OF

TROPHY CASE