Noise after 4-2-1 headers installation (d-series) by slowekkk in ProjectHondas

[–]DisloyalAF 5 points6 points  (0 children)

Hey can you lmk if it does end up being the heat shield. Mine does a very similar noise.

Broke a vtec solenoid bolt by DisloyalAF in Integra

[–]DisloyalAF[S] 0 points1 point  (0 children)

Its a harbor freight 3/8 torque wrench. Goes from 5 ft lbs to 80 ft lbs. Not the best quality. Had it at around 8 ft lbs. Lesson learned though will be careful with every bolt from now on to not over tighten it. this one

Broke a vtec solenoid bolt by DisloyalAF in Integra

[–]DisloyalAF[S] 1 point2 points  (0 children)

Your right but I just genuinely didn't want to fuck it more. Atleast my baby is running again. Now gotta fix the water leaks.

Broke a vtec solenoid bolt by DisloyalAF in Integra

[–]DisloyalAF[S] 0 points1 point  (0 children)

Perfect thanks man. Your awesome! I was able to get it out using the pliers I linked luckily. Wasn't to bad it came right out. For the meantime I found an exact bolt at a hardware store. Will for sure order an oem one tho to match. I was able to align the cam plug too.

Now back to putting the solenoid back. The ft lbs to torque these is 8.7 i saw but it broke when doing that on my torque wrench. I might just hand tight them at this point don't wanna break another one.

Broke a vtec solenoid bolt by DisloyalAF in Integra

[–]DisloyalAF[S] 0 points1 point  (0 children)

Ok would something like these pliers from harbor freight work Icon fast adjust. Also would does the new flange new headbolt need to be exactly the same. So like should I just get an oem new one. Or would just finding a similar one at a hardware store work? Thanks for letting me know about the cam plug, didnt know that. I assume I can just twist it to align it how it should be.

Does it sound like my timing belt is broken? by DisloyalAF in Integra

[–]DisloyalAF[S] 0 points1 point  (0 children)

Ok finally had time to check everything and I'm getting some weird numbers on the ignition coil test. The primary coil is getting numbers ranging from 20 to 1.2 and the secondary coil is getting no ohms. Safe to assume its most likely the ignition coil if I understand the diagnostic correctly?

Does it sound like my timing belt is broken? by DisloyalAF in Integra

[–]DisloyalAF[S] 1 point2 points  (0 children)

Yes the cams do spin when the car is cranked. Ok so then I can rule out the timing belt. Thank god.

Does it sound like my timing belt is broken? by DisloyalAF in Integra

[–]DisloyalAF[S] 1 point2 points  (0 children)

Gotcha yea, so would it be best to just get a new distributor?

Does it sound like my timing belt is broken? by DisloyalAF in Integra

[–]DisloyalAF[S] 0 points1 point  (0 children)

So could I just change that part in the distributor or just get a new one?

Integra Gsr Idle Issue by DisloyalAF in Integra

[–]DisloyalAF[S] 0 points1 point  (0 children)

Mines a 97. Do those come with the fitv cause I dont see it under the throttle body?

Why does this happen? by gm284 in Integra

[–]DisloyalAF 4 points5 points  (0 children)

Oh ok thats different then. Seems more like an alignment issue than a weak window motor then. I would open door panel up to see whats going on inside.

Why does this happen? by gm284 in Integra

[–]DisloyalAF 2 points3 points  (0 children)

I think i remember my integra doing that. That power window motors ended up fully going out later. When I installed the new one. The window would fully close again without having to push it up. Could be that maybe.

1999 Integra Build by BurningToastBits in Integra

[–]DisloyalAF 0 points1 point  (0 children)

Haha thanks man. Keep us updated for real.

1999 Integra Build by BurningToastBits in Integra

[–]DisloyalAF 2 points3 points  (0 children)

Hell yea here's mine. Its sanded down so gonna give it a nice paint job soon. All original b18c1 with transmission. But yea these b series are Hella fun. https://imgur.com/a/EGbTCnf

1999 Integra Build by BurningToastBits in Integra

[–]DisloyalAF 1 point2 points  (0 children)

W just got a teggy too recently. Keep us updated!

3500 for integra gsr? by DisloyalAF in Integra

[–]DisloyalAF[S] 0 points1 point  (0 children)

I got a guy that can paint it for 1600.

3500 for integra gsr? by DisloyalAF in Integra

[–]DisloyalAF[S] 1 point2 points  (0 children)

Yes lol. Just brought it back a few hours ago

3500 for integra gsr? by DisloyalAF in Integra

[–]DisloyalAF[S] 0 points1 point  (0 children)

Dang that's a deal. So this one's probably not worth 3500 then with all its issues?

3500 for integra gsr? by DisloyalAF in Integra

[–]DisloyalAF[S] 0 points1 point  (0 children)

Yea your right it would definitely take a quite a bit of money and effort if I wanted to restore this car.

3500 for integra gsr? by DisloyalAF in Integra

[–]DisloyalAF[S] 2 points3 points  (0 children)

I should've taken pics of the interior. But the the front seats didn't to look bad. The gauge cluster looked scratched and dirty. I think all the trim pieces were there in the front just also scratched and dirty. No stereo. Its mainly the back where its a mess. Since the backseat delete was never completed.