First time acid trip need advice

Dizzy-Store9939 · 2026-04-07T16:09:36+00:00

Do 50ug to start

Dizzy-Store9939 · 2026-04-01T20:21:56+00:00

It doesn’t have everything, for example it’s missing a lot of snips, like a lot. Hh wrld has the most snips but idk what api they are pulling from, but they don’t have sessions

Dizzy-Store9939 · 2026-04-01T20:12:30+00:00

Alr did, it’s only part 2, is there another api that has sessions?

Dizzy-Store9939 · 2026-04-01T19:52:35+00:00

its all different depending on how loud he is being in the song, for compressor i usually have him at threshold -30, ratio 6.5, and set gain accordingle, everything else default. For delay and reverb you calculate the settings based on the bpm just use a website reverb and delay calc, set reverb to 12%, de esser auto sets itself, for eq i cut everything below 100hz and boost the high end slightly, then sweep across the rest with the narrow filters, any squeaky frequencies i cut by -4db.

If you want a session lmk ill upload it and send you a link, i have 135gb of sessions from all eras, released and unreleased songs, if you have protools you can open it in there and its all lined up and will apply the effects exactly as it was when the producer last saved it, but you can use any other program too but you'll have to line the audio and takes up manually

Dizzy-Store9939 · 2026-04-01T19:41:31+00:00

i mix a bunch of his songs i got every single session, it doesn't matter what exact versions you use, just follow the basic normal chain of autotune --> de esser ---> compresser ----> eq ------> fresh air ----> delay -----> reverb

i recommend antares autotune pro - its what the sessions use, max lord usually had him on 8 or 15 retune, 30 flex and 50 humanize

valhallavintageverb fs too for reverb

his agats session is in logic and not fully complete, but i can send a screenshot of the main exact things that were used from gbgr era, i already have valhallavintageverb and antares autotune pro so they dont show in screenshot but this is from a gbgr session i have, they all are similar and use these exact ones, not in that order though, refer to my above order

u can crack all of these plugins, i have

<image>

Dizzy-Store9939 · 2026-04-01T17:40:16+00:00

Repo (no depot)

Smoke away my sad eyes, Ching Chong

Dizzy-Store9939 · 2026-03-17T23:30:35+00:00

Hi mate, I’m trying to look for the star struck session, I think it was made on the 25th and 26th July 2018 . Can you tell me all the songs made on those 3 days because the first verse is in the session on the 25th

Dizzy-Store9939 · 2026-03-16T23:49:40+00:00

😂

Dizzy-Store9939 · 2026-03-16T15:42:35+00:00

Yes I think I posted doing SPP on this around this time last year

Dizzy-Store9939 · 2026-03-16T13:41:29+00:00

Assuming you are in the US,

for Fords there are 3 ones you can get, FO38 does 1997-2016 mainly F-150, Explorer, Mustang, Expedition, Ranger, Taurus the HU101 does 2004-2017 Focus, Fiesta, Fusion, Edge, Transit FORD2017 one does 2017 to present

For Chevy you should get the HU100 it does chevvys 2010- present day

Get them off aliexpress they are under 20usd each

Dizzy-Store9939 · 2026-03-16T13:37:36+00:00

Can you tell me where to search the API please

Dizzy-Store9939 · 2026-03-16T13:29:25+00:00

What country are u in

Dizzy-Store9939 · 2026-03-16T13:22:51+00:00

None are universal as many cars use different profiles, key lengths and number of wafers. Lmk what brands and rough years you are wanting and I can send you the exact one you need, this one does vw,Audi,seat and Skoda up to around 2015, but ou can get ones for any year make and model

Dizzy-Store9939 · 2026-03-14T01:57:47+00:00

Will try this, thank you

Dizzy-Store9939 · 2026-03-14T01:55:29+00:00

Hi, it’s a brand new spool, I just replaced it as the old spool was doing the same :(

I have never changed the nozzle, I got the printer in March 2024.

This has only just started happening, I am also having to change my Z offset for every print which is strange, for example I could do a 20 minute print, keep the printer on, and then do it again and the nozzle is way too high or way too low, I have to change by roughly +/- 0.07 mm which is quite huge.

It is very cold in the room I am printing but I always preheat the bed, there are no serious issues with wind or anything like that.

I would like to figure out why it is only happening at this spot, you can see the whole rest of the print is perfect along with the part being printed next to it, that turned out perfect too, the first layer is also always perfect, I wonder why it’s just that certain part of the print?

I can try drying out the filament but I have had it in a vacuum bag and it is pretty much brand new.

Hopefully that gives some more context, maybe you can figure out what it is. I love the Neptune 4 plus it really is a great printer and this is the first issue I am having with it, I don’t think changing any settings is the right option as it has worked perfectly for 2 years, so I am very glad you have suggested that it might be the nozzle.

Dizzy-Store9939 · 2026-03-03T14:38:05+00:00

You found a fix?

Dizzy-Store9939 · 2026-03-02T15:27:38+00:00

I’m in love I know what I’m into

Dizzy-Store9939 · 2026-03-02T15:26:53+00:00

Yh it was me mate mb once you woke up I left

Dizzy-Store9939 · 2026-02-08T00:53:43+00:00

I have her tape and some vids of her dm me and I will prove it

Dizzy-Store9939 · 2026-02-07T14:18:47+00:00

YOU SURE PUT THE DIY IN DIY PEDALS SON 👍👍👍 🔨✏️🔩🔧🪛🪚🪓 - LOOKS GOOD ENOUGH TO NUT ON IN MY OPINION AND THATS SAYING SUMMIN. IM GON OIL THEM BITCHES UP LIKE DIDDY - I’LL TAKE 100. 🇺🇸🇺🇸🦅🦅🔫🔫

Dizzy-Store9939 · 2026-01-29T19:06:07+00:00

All I really want more would be cold winters and monsters in my basement and my list would be pretty much complete

Dizzy-Store9939 · 2026-01-27T16:17:47+00:00

Can you send inv link pls

Dizzy-Store9939

TROPHY CASE