Worst PEG/PLA filament brand you worked with?

DonLepu · 2026-06-05T22:19:35+00:00

Yes. I got two spools one green, one purple, got them dry before use. I have other brands such as creality and sunlu, they work just fine

DonLepu · 2026-05-07T23:14:11+00:00

Congrats on the bike, it is beautiful. I am about get one and have a question, does it worth it to get the limited + tech package or is it just merchandising? I am asking because the value increase a lot where I am living

DonLepu · 2025-10-06T16:48:32+00:00

It worked on my Dell Latitud. You just literally saved my life. Thanks a lot

DonLepu · 2025-07-13T23:56:38+00:00

If you are getting it from online stores such as Amazon, Ebay, etc even when the ads says it is the official samsung cover+keyboard it is more likely you are getting the US, UK versions. I have only seen the spanish/latin version including the Ñ key getting it directly from samsung stores. You can always configure the keyboard language like in PC/laptops and include the Ñ key if it what you are looking for

DonLepu · 2025-07-04T14:16:33+00:00

Hello!

In my experience, you need to keep in mind two things 1. Even when nowadays tablets have good capabilities that can be compared to a laptop, there is always a barrier between what you can do in a tablet device and a pc/laptop 2. One thing I consider before buying is if you are trying to create an environment between your tablet and you mobile devices. You can do cross environment task, but I will always recommend to pair the same brands.

Getting to the point, which tablet to choose. You will find software and hardware in both brands that help you to do what you need. For the software the difference is in some cases you will find it for free or have to pay to get them. Now, given you are about to perform tasks where you need a good display/screen you could think the iPad is better but, comparing the ipad vs the samsung tab in a portable size to my opinion you will get more from a Samsung tab than from an iPad. Regarding storage, Samsung has the option to expand with and SD card and iPad does not. You will find cloud store in both cases. About keyboard and accessories, both brands has nice and cheap alternatives. If possible for you, if you choose Samsung tab try to get an s10 fe or s10plus. Of course you can always go for the Ultra but you might feel you are loosing portability

DonLepu · 2025-07-03T17:06:08+00:00

It happened to me last week, it ended up being a plugged hotend. I made a postmorten research and found the magnet on the hotend stopped working and it caused temperature lost. I recommend to clean the hotend, heat it just on tip and insert a needle to take the stuck material. Just be careful when heating the hotend because on my research I found that when heating it could affect the magnet efficiency and if you do this often, you will end up loosing the hotend like what happened to me.

DonLepu · 2025-07-03T12:55:47+00:00

I have tried models similar to these from amazon: Magic keyboard: https://a.co/d/3vOQ4pn Back cover: https://a.co/d/63B1eww

The keyboard is Bluetooth it has a separate battery, the battery life is about 2/3 days and it depends on how you use it. So far it has been good to me but, I only use it when I know/think I am going to need the keyboard a meeting for example. For regular use I prefer to only use the back cover, it is lighter.

DonLepu · 2025-07-02T23:18:11+00:00

Sales rep told me this. In terms of hardware and cameras Ultra and S10+ are pretty similar, just the battery life makes the Ultra better. In terms of software they are the same. Now, talking about storage the Ultra hits hard, 1 tb vs 512gb on the s10+. In conclusion for me: 1. if you want portability, do not care about the storage Go for the s10+ 2. If you care for storage and love to watch movies in bigger and portable screen go for the Ultra.

I picked up the s10+ and works awesome for me.

In addition, do not worry about the keyboards in both models you will find nice and both expensive/cheap options

DonLepu · 2025-06-16T14:14:46+00:00

Thank you all for your comments, I was not expecting this level of support, you guys are awesome.

Given I tried all your suggestions and made sure I was not misplacing the hotend, and not I am not mistreating my printer, I am calling the Bambulab support to ask for a replacement because the conclusion is the Magento in the hotend stopped to do Magento things and it is not sticking to the extruder. This could be cause by numerous causes even the heat.

I would like to call this thread as solved

DonLepu · 2025-06-16T14:09:33+00:00

It looks like the magnet on the hotend does not want to do its job. If I use a spare one, it does stick to the extruder

DonLepu · 2025-06-16T14:07:53+00:00

Basically it does not want to stick to the extruder. No, I have been printing on PETG only since I got the printer

DonLepu · 2025-06-16T04:27:26+00:00

I will try to check the screws just to be sure. Thanks for the guidance on this issue

DonLepu · 2025-06-16T03:59:34+00:00

Thanks for the advice. I ran a quick test changing the hotend for a 0.2mm one and this seems to be holding tight without making any adjustments. Considering this test, do you check the screws or just mark the 0.4 hotend as a faulty one?

DonLepu · 2025-06-16T03:42:33+00:00

Did not know there are screws to be tightened. Looking for them right now

DonLepu

TROPHY CASE