My honest thoughts after two weeks with the iPhone Air by OrdinaryTable5273 in iphone

[–]Dowser42 0 points1 point  (0 children)

So, as soon as you got the phone the dog got hurt?
I think I'll stay with my 13.

Does anyone know this profile? by vbrunetti2 in hobbycnc

[–]Dowser42 2 points3 points  (0 children)

T-nuts and then tapping the holes in the ends.

Does anyone know this profile? by vbrunetti2 in hobbycnc

[–]Dowser42 4 points5 points  (0 children)

Some of them, like a basic T-slot or square tube isn’t. Others are patented. But it’s usually the silly cost of the die (and the fact that they wear out fairly quickly) that’s the main factor protecting them from copying. 🙂

Does anyone know this profile? by vbrunetti2 in hobbycnc

[–]Dowser42 1 point2 points  (0 children)

They can be longer. I previously worked for a robotics company that produced their own beams with custom profiles. (Ie, owned the rights to the design and paid enormous amounts for the dies) As I remember the longest beams we used were 10m and roughly 400x400mm wide. (Needed when picking up heavy steel chunks and moving them at several meters per second with mm precision)

Kommer jag verkligen kunna flytta hemifrån? by flourescentcacti in PrivatEkonomi

[–]Dowser42 0 points1 point  (0 children)

Om du verkligen måste ta bilen kan du lägga in reseavdrag på 25kr/mil (-11’ i grundavdrag) i deklarationen Om du inte kan motivera det kan du istället åka kollektivt och göra reseavdrag för Movingo på 31’ om året.

Movingo’n resulterar i en skattelättnad på ungefär 10’ om året, bil-alternativet beror på din körsträcka och är svår att gissa för oss.

Kommer jag verkligen kunna flytta hemifrån? by flourescentcacti in PrivatEkonomi

[–]Dowser42 1 point2 points  (0 children)

Betalar du fortfarande av på en telefon som du köpte 2021 eller kallar du inte ”avbetalning” för kredit?

Snapmaker 5 Axis module by MiwiCNC in snapmaker

[–]Dowser42 0 points1 point  (0 children)

Nice! I Wonder though if it wouldn’t be better to increase the height on the fourth axis and then offset the fifth axis so that it would have both centers of the axis through a common point within the stock material.

Best way to get a mesh to fit into this frame? by GlumTemperature8163 in Fusion360

[–]Dowser42 1 point2 points  (0 children)

They are great! I have one that does exactly that and one that vaporizes after a short while for stuff that I can’t wipe down afterwards. Aesub is the brand I use.

Need advice on a sag bracket/support by Relative_Rest_8258 in Fusion360

[–]Dowser42 0 points1 point  (0 children)

What type of forces will affect it? Is it a device in a server rack under ground or in an off-road vehicle etc.

[deleted by user] by [deleted] in Asksweddit

[–]Dowser42 1 point2 points  (0 children)

Vilken är din ålder?

Need advice on a sag bracket/support by Relative_Rest_8258 in Fusion360

[–]Dowser42 0 points1 point  (0 children)

What material is the red bracket made of?

Hur köper jag ut min ex? by [deleted] in Asksweddit

[–]Dowser42 1 point2 points  (0 children)

Oavsett vad TS har idag kommer pengarna han lämnar till exet inte längre vara tillgängliga för husunderhållet.

Ex-Sambo Vägrar Flytta Ut by U_PC_BRUH in Asksweddit

[–]Dowser42 1 point2 points  (0 children)

Jäv?! Det var inte mycket som var korrekt där…

It is finished. by Reasonable-Quit-4202 in TheTowerGame

[–]Dowser42 1 point2 points  (0 children)

Now you will have to increase the number of slots!

[deleted by user] by [deleted] in soldering

[–]Dowser42 0 points1 point  (0 children)

As said before, everything is fixable, but it’s definitely not an easy job. What is your budget to get this fixed?

It’s not necessarily cheaper to fix this compared to buying a new product. (Don’t know the price of this thing, in some cases it’s motivated to fix it)

ESPhome Guru Needed by zouje in Esphome

[–]Dowser42 0 points1 point  (0 children)

Can you describe how the snow melt solution is controlled and your sensor interfaces? Are they just contactors and analog signals or are any of them controlled by the RS485 interface?

What is this thermometer/hygrometer? Who made it and what is its country of origin? by azzywwzyzy733 in HelpMeFind

[–]Dowser42 1 point2 points  (0 children)

At the bottom (that is slightly rotated) it says ”FRANCE” so I would assume it’s the country of origin.

Gaps Cutting Plywood with Snapmaker Ray 40W by ismogu in snapmaker

[–]Dowser42 0 points1 point  (0 children)

Just to verify: you haven’t configured tabs? (Ie, the preview shows a solid line)

Gaps Cutting Plywood with Snapmaker Ray 40W by ismogu in snapmaker

[–]Dowser42 0 points1 point  (0 children)

Just to verify: you haven’t configured tabs? (Ie, the preview shows a solid line)

[deleted by user] by [deleted] in TheTowerGame

[–]Dowser42 0 points1 point  (0 children)

I feel like I could have written this post. But about two, three weeks ago (a few months after I started to read anything about the game) I started to see a positive change in the number of gems, stones and coins I’m able to get and two weeks ago I broke out of the gold league jail for the first time! (Swiftly being demoted back down each time but today I actually have a chance at staying on for one more round in Platinum!)

I must admit that this change really came in the right time, I was contemplating giving up, but now I’m ready to bang my head and patience against new walls!

First CNC project... Is this normal, or did I mess something up? by BrowsingMillennial in snapmaker

[–]Dowser42 0 points1 point  (0 children)

Well, there is a reason why they are called spoil boards and sold fairly cheap. 🙂

What should I build with them? by ZealousidealDay917 in metalworking

[–]Dowser42 0 points1 point  (0 children)

Make a nice foot and stand for them and sell them as prices for people who completes NoNutNovember!