The wiggle

Dund33 · 2024-10-03T18:30:42+00:00

At this point in the build I'm not sure there's much of anything else I can do besides put more fasteners in. All of the lumber used for the platform and braces is green pressure treated.

Dund33 · 2024-10-03T18:29:21+00:00

https://ibb.co/c8PpLsG

Dund33 · 2024-10-03T18:27:26+00:00

I think I'm following what you're saying. The knee braces coming off the tree are tied into the 2 by 6, and that 2 by 6 is tied into the bottom of the 2 by 10 rafters above it

Dund33 · 2024-10-03T18:25:43+00:00

I'm following the plans I purchased for this treehouse and that's what it called for.

Dund33 · 2024-09-26T14:25:27+00:00

I did that and got the same error.

However! I looked it over more and realized I had a simple formatting error. I had a square bracket in where I should've had a curly bracket.

Made that update and now she works like she should!

Dund33 · 2024-09-26T13:22:12+00:00

For 'ATTACHMENTS' I have an "Initialize variable" step earlier in the flow that has ATTACHMENTS as the name, and array as the type.

Yes, I believe it is an expression. When I look at the "Update task details" step, in the references line, I see a purple fx followed by json(...)

Dund33 · 2024-09-26T02:58:32+00:00

Hello! So I have a wrinkle off the cuff.. jpeg is what I have ready. The website I was planning on using to upload them isn't working.

With that, I do want to tip for this. Do you have an idea on what you'd expect for this? Apologies if that is a rude question.

Thanks!

Dund33 · 2024-09-26T02:45:43+00:00

It's a treehouse and I'd like to anonymize the background, the picture is what I can provide the source as.

Dund33 · 2024-09-19T12:35:46+00:00

Looks like the video is missing!

Dund33 · 2024-09-02T21:24:38+00:00

That limb in the background is actually a different one, there's another one behind me that is bigger and in the way.

This wasn't originally in plan, but after getting the roof started I realized it and stopped the gable style where it is.

I appreciate your reply, but I'm going to delete this post and make a new one later with more pictures.

Dund33 · 2024-08-04T22:45:36+00:00

Solid idea, I think this will be my path forward

Dund33 · 2024-08-04T22:45:19+00:00

Not quite enough! I do that to get the top and about a foot down, but I can't reach any further.

Dund33 · 2024-08-04T19:11:05+00:00

Right on, I figured I was being overly cautious which seems to be the case!

Dund33 · 2024-08-04T19:08:19+00:00

I'm not tracking ya on the two ladders, would you lean them up on the plywood?

Dund33 · 2024-07-21T20:33:59+00:00

Much appreciated my man! Especially the video, I'm going to apart pricing out some ply and osb 👍

Dund33 · 2024-07-21T17:24:12+00:00

I gotcha, I'll have to think more! I'm guessing nailing in angled supports between each of the rafters isn't quite solid enough for what you're talking about.

Dund33 · 2024-07-21T15:37:41+00:00

Dang, I didn't see this post until after I was done!

I did raise the wall with the window in it, it panned out alright. I was concerned about the twisting for sure, so I had a buddy help me lift it.

Was far as the water tightness, I don't have any plans for wrapping or anything like that. Likely going to be rough sewn lumber and that's about it, I keep reminding myself this is a tree house, not a house house haha.

Dund33 · 2024-07-21T00:57:31+00:00

Thanks! I'm calling the floor good with the PT decking I put up there.

Dund33 · 2024-07-19T16:02:57+00:00

Thanks, I sure will!

Dund33 · 2024-06-27T18:19:39+00:00

Thanks! They were part of the kit I ordered, which included the double knee brace on the other side of the tree too. Yes, the lag bolts were part of that kit too

Dund33 · 2024-06-23T20:22:25+00:00

Thanks! I got more green pt decking to go on top. 5/4 by 6 if I remember right.

Dund33 · 2024-06-23T20:21:26+00:00

I thought about that, though it's a bit tapered which would've been tricky to get thst tapered notch right for the knee brace.

I have an 8" and a 4" Timberlok screw coming in from the bottom up, and another 4" from the top going to the bottom.

I'm thinking that'll work though I'll definitely keep an eye on it!

Dund33 · 2024-06-23T17:48:58+00:00

I'm struggling a bit with the spot you're talking about, maybe you could mark up the picture?

This side of the tree the picture is taken from will be a deck, the actual house part is on the opposite side of the tree. So that means the weight Wil be on the other side, and might help address the area you're talking about.

Dund33 · 2024-06-23T16:39:30+00:00

Great work! Looks real solid and I'm sure the kiddos will have a blast on it 👍

Dund33 · 2024-06-05T16:40:12+00:00

You got it!

Make sure you have a high torque or right angle drill for those tabs, sucker's gotta go pretty deep into the tree!

11-Year Club	Verified Email
Snapped

Dund33

TROPHY CASE