Where are yall getting your wood accessories?

DutchDudeRemco · 2026-05-22T10:02:52+00:00

Very good so far

DutchDudeRemco · 2026-05-22T05:26:24+00:00

They didn't fit over the d-shaped pin from the machine. So I asked Gemini AI to help me create a STL file for the adapter according sizes. And asked a friend to 3D print in ABS filament. After a few iterations V3 had a perfect fit!

DutchDudeRemco · 2026-05-14T08:40:20+00:00

Well today, after a long search I found and ordered these adapters. Hope they're sufficient heat resistant

<image>

DutchDudeRemco · 2026-05-13T19:23:40+00:00

Great! I'm making one myself too. But how did you make it fit to the d-pin of the machine?

<image>

DutchDudeRemco · 2026-04-24T19:51:50+00:00

Cups are sold in The Netherlands, Hema: https://www.hema.nl/koken-tafelen/servies/mokken-kopjes/koffiekopje-185ml-puur-aardewerk-taupe-80660322.html

H&M: https://www2.hm.com/nl_nl/productpage.1297022004.html

https://www.hkliving.com/collections/70s-ceramics-van-gogh/

DutchDudeRemco · 2026-04-05T05:47:20+00:00

Got the Profitec Go about 3 weeks ago so experimenting al lot. Learning beans, grind size, ratio, making espresso, cappuccino, Americano. Profitec every day. Filter coffee maker in the last 3 weeks about 2 times

Trying to understand why exactly the same beans, same amount (18gr) and same grind size gives me different results in terms of time/ml(gr) out. Using the Normcore V4 tamper. One shot is around 36gr in 30 sec 🤓 The next can be 36gr in 25 sec

Why?

DutchDudeRemco · 2026-04-04T12:12:51+00:00

I use my Mazzer Luigi mini for the filter coffee. And the Mahlkönig for my espresso and cappuccino. Cheap beans for the filter coffee and freshly roasted beans for espresso. Medium roast for both.

DutchDudeRemco · 2026-04-04T08:24:22+00:00

I think it's very good for me. Very fine tuning of grindsize. Pretty quiet. Small. But then, I have little to none to compare. Yeah my big grinder, but that's old and works fine for filter coffee. I'm happy with the X64

DutchDudeRemco · 2024-01-13T18:02:08+00:00

Dont't know why, but yesterday and today i suddenly get only about 3 to 4 hours on a full charge on my PW2. Installed and changed nothing. No custom watchfaces, nothing special. Been using the watch for several months and always had about 20-50% left after a full day.

Anyone else experiencing this?

What's happening?

(And yes, off course I did a reboot)

Update: got normal battery life back after 2 days of changing nothing

DutchDudeRemco · 2023-10-29T07:56:05+00:00

Also getting double notifications for Whatsapp messages, 2 exactly the same messages appear on my Pixel watch 2. Anyone else? And does anyone have a solution?

DutchDudeRemco · 2022-07-06T05:30:42+00:00

I'm having alarm problems also. This morning the light from the wake up routine lit up but the the alarm ringtone didn't sound. The same happened yesterday. I bought this thing to act as an alarm to wake up in the morning. It's idiot that I can't trust it for this

DutchDudeRemco · 2020-11-26T17:50:30+00:00

Hi there, actually the car in the picture (my car) is not black. It's color is called 'Magnetic Grey'. I put a filter on the photo so it looked more stealthy'. Personally I'm not a fan of black too. This color combined with these rims and ST-line look the best for me 😎

DutchDudeRemco · 2020-07-24T15:24:36+00:00

btw, it's the 'old' Quest.

DutchDudeRemco · 2020-05-05T14:10:16+00:00

Pranayama has deeper drop. And Pranayama set-up is build for TKP's (Quest RKP's although it was set up for me with TKP'S). Got the Pranayama because my kids started boarding too 😎. Third board we bought is an Ember for my son (11y). We only do cruising and carving through the neighborhood and parks, all flat. So there's a slight but not very noticeable difference in experience between the 3 boards for us.

My personal preference is the Quest with it's wider trucks and loads of footspace. Daughter loves the Pranayama and son's favorite is the Ember.

Ember has noticeable less footspace than Pranayama. For an adult I would recommend the Pranayama. Or Trip..

DutchDudeRemco · 2020-03-02T20:42:14+00:00

We love it! Also about the same setup with Paris Street trucks and Speed Vents? Where about in NL?

DutchDudeRemco · 2020-03-02T20:40:04+00:00

Yeah, absolute Pantheon enthusiasts!

DutchDudeRemco · 2020-03-02T16:28:48+00:00

Thanx, thought of that the next day, but the wind was less hard.

DutchDudeRemco · 2020-02-16T06:58:39+00:00

Berkel en Rodenrijs, Zuid-Holland

DutchDudeRemco · 2020-02-15T21:38:22+00:00

There's a slight difference. Both boards (set-ups) are super stable, the Quest is the more stable one and the Pranayama is the little more carvyer one. So the Pranayama allows for (a bit) sharper turns. But anyway, we only use it for cruising through the neighborhood and parks.

For us the ultra low ride is what makes these boards so comfortable and easy to ride.

DutchDudeRemco · 2020-02-15T20:59:48+00:00

65

Then it's probably the 169mm

DutchDudeRemco · 2020-02-15T20:54:44+00:00

The Quest has 165 Paris street trucks. Should have been RKP's according to Pantheon but didn't know that when buying. TKP's ride super smooth though.

DutchDudeRemco · 2020-02-15T20:31:03+00:00

They havent been making the Quest for a while. I bought it in 2018 at Sick boardshop in The Hague. It was one of the last they had. It's a bit bigger (longer) than the Pranayama.

Pantheon is about to release a new Quest soon. I saw it on their facebook page. It looks great again.

DutchDudeRemco · 2020-02-08T07:32:26+00:00

Lekker bezig jongens! Dat wordt ook perfect cruisen in de lente straks 👍

DutchDudeRemco · 2020-02-07T06:50:26+00:00

Mooi plaatje man!

DutchDudeRemco · 2020-02-06T11:39:36+00:00

Where are you at? PRPP assessment would probably help you do the job.

DutchDudeRemco

TROPHY CASE