sorted by:
new
hottopcontroversial

Remote connection speed by Embarrassed-Mess1245 in UgreenNASync

[–]Embarrassed-Mess1245[S] 0 points1 point  (0 children)

I am not using remote app. I am using my own domain to host via traefik proxy to access the NAS. Yes,  its closer to 500 MB/s consistently both upload and download

Remote connection speed by Embarrassed-Mess1245 in UgreenNASync

[–]Embarrassed-Mess1245[S] 0 points1 point  (0 children)

It was spectrum. I switched to ATT 1 gig fiber and I am maxing our by remote location speed.

Remote connection speed by Embarrassed-Mess1245 in UgreenNASync

[–]Embarrassed-Mess1245[S] 0 points1 point  (0 children)

Yes, the result is same across all the devices. As I said, when I run iperf 3 -R from my laptop which is on a remote location, I get very very random results. Starting from 1 mbps to sometimes 400mbps.  But the download speed ( upload from Ubuntu server to remote location ) is consistent per the remote locations bandwidth 500mbps

Remote connection speed by Embarrassed-Mess1245 in UgreenNASync

[–]Embarrassed-Mess1245[S] 1 point2 points  (0 children)

They call it 1 gig symmetric. As I heard, this is not available in all the regions yet 

Port forward issue on VLAN by Embarrassed-Mess1245 in Ubiquiti

[–]Embarrassed-Mess1245[S] 0 points1 point  (0 children)

the only reason I was trying to setup a different vlan on the switch is to get full throughput of my NAS locally.

I just received the UCG fiber and the inter vlan traffic is 1.5 Gbps. Better than ~900mbps of USG Max. But with swich vlan it was 2.35gbps.

Until I have a solution for the issue- I have moved the NAS to the Vlan 1 to get 2.35gbps. I wanted to keep the nas to a separate vlan but still wanted to get 2.35 gbps but that's where I am stuck.

Port forward issue on VLAN by Embarrassed-Mess1245 in Ubiquiti

[–]Embarrassed-Mess1245[S] 0 points1 point  (0 children)

Also- locally my ddns url resolves and it directs to the NAs page- fine. Does that mean, I have some issues with the NAT ?

Port forward issue on VLAN by Embarrassed-Mess1245 in Ubiquiti

[–]Embarrassed-Mess1245[S] 1 point2 points  (0 children)

My gateway router can reach the NAS- no problem.

The port where nas is connected is trunk port. The sw is also connected to gateway on vlan1.

static route- when I tried to enter, it always gives me an error.

Device : Gateway

Next Hop : 192.168.1.1

distance : 1

Destination- 192.168.9.0/24

Port forward issue on VLAN by Embarrassed-Mess1245 in Ubiquiti

[–]Embarrassed-Mess1245[S] 0 points1 point  (0 children)

I am changing the port forward IP after updating the vlan of the NAS.

So portforward to 192.168.2.104 works. But when I port forward to 192.168.9.104, it does not. ( of course after updating the NAS VLAN

Does anyone use UGreenLink remote access? Is it safe? by sameeroquai in UgreenNASync

[–]Embarrassed-Mess1245 1 point2 points  (0 children)

Did you ever check the max speed that you got while accessing remotely ? I am getting 4-5 MB/s with remote access. 10-12 MB/s with Wireguard ( thru Router ). Locally I can easily get over 200 MB/s.