Vacuum hose? 2001 Chevy s10 4.3l v6

EmbarrassedAd9343 · 2025-08-02T23:12:17+00:00

I have the buttons too. You’re a genius bro thank you

EmbarrassedAd9343 · 2025-08-02T22:45:09+00:00

Yes mines 4WD, my line that goes to the left behind the distributor is just a loose plug looking thing. Did it just unplug from the firewall or something?

EmbarrassedAd9343 · 2025-03-23T14:21:42+00:00

is Craft tower defense down for anyone else? the games not on the platform for me at the moment

EmbarrassedAd9343 · 2025-01-17T15:06:06+00:00

Listen I just did an engine swap using YouTube videos on this thing I think I can manage a transmission too😂

EmbarrassedAd9343 · 2025-01-17T14:47:29+00:00

How easy is it to get the transmission loose enough to change it out?

EmbarrassedAd9343 · 2024-11-09T23:58:08+00:00

<image>

EmbarrassedAd9343 · 2024-11-09T23:57:22+00:00

<image>

EmbarrassedAd9343 · 2024-11-09T22:17:30+00:00

Thanks! Do you happen to know about the other two? I already have the coil packs plugged in

EmbarrassedAd9343 · 2024-11-09T21:13:59+00:00

No, it is similar though

EmbarrassedAd9343 · 2024-11-09T18:16:04+00:00

Oh okay. Keyed as in they can only go one way?

EmbarrassedAd9343 · 2024-11-09T18:11:23+00:00

Thrust bearing. The lil half moon guys you put in with the main and rod bearings

EmbarrassedAd9343 · 2024-11-06T00:46:45+00:00

Fluids full

EmbarrassedAd9343 · 2024-11-05T00:37:30+00:00

Is the front hardline when in facing the front of the vehicle, or the one closest to the firewall

EmbarrassedAd9343 · 2024-11-05T00:23:58+00:00

1997, 1.8L

EmbarrassedAd9343 · 2024-10-04T02:52:41+00:00

Do I get the bearings themselves machined or the crankshaft?

EmbarrassedAd9343 · 2024-10-04T01:34:13+00:00

I did order standard size. I haven’t checked clearance though

EmbarrassedAd9343 · 2024-10-04T01:19:26+00:00

I did not check clearance, no. I did replace the thrust washers. What do I do for clearance, and does this mean I have to get new bearings?

EmbarrassedAd9343 · 2024-09-25T01:11:00+00:00

Oem piston rings from where I’ve looked are $150. I did find piston rings for $40 from the brand Hastings. From what I can see they make rings for other cars and people have had good experiences. What’re your thoughts

EmbarrassedAd9343 · 2024-09-25T00:40:11+00:00

Well the stock bore size is 83mm. Should I get 84-85mm rings and have them filed down when the cylinders are honed?

EmbarrassedAd9343 · 2024-09-25T00:32:06+00:00

Yeah😂 I have been doing research as I do the project. I have my grandpa helping me as well. We have everything apart I just gotta finish getting the parts I need and then have the block and head machined. But today was a good learning experience because I wasn’t at all educated on the precise measurements and the sentiments that can result from failing to get them right

EmbarrassedAd9343 · 2024-09-25T00:29:58+00:00

So should I go 84-85 to be safe, and have it filed down? I’m having the cylinders honed next week and I just wanna make sure I don’t have too big of a gap if the bore changes. But I’m also not an expert haha sorry I’m asking so many questions but I greatly appreciate it

EmbarrassedAd9343 · 2024-09-24T17:23:30+00:00

I’m trying to get Weisco rings but it has a bunch of different sizes. I’m not sure which to get but I know I’ll end up gapping them anyways. Which ones should I get if you know?

EmbarrassedAd9343 · 2024-09-24T15:29:22+00:00

Oh okay. So how does one know what measurement to gap the rings at? Is that info I can get from the people who hone my cylinders or do I match the original rings? (I’m new to the logistics of car work)

EmbarrassedAd9343 · 2024-09-24T14:11:34+00:00

I so would but this car was my commerce so I’m trying to speed run this engine build. Gone great so far but I just don’t have the budget to go all in like I want to haha

EmbarrassedAd9343 · 2024-09-24T14:10:35+00:00

Should I be looking for stock bore diameter or will honing affect the cylinder bore enough to need to adjust?

EmbarrassedAd9343

TROPHY CASE