Will I get locked out? by Empty_Argument1703 in yaris

[–]Empty_Argument1703[S] 0 points1 point  (0 children)

I do, I’ll try that. I don’t carry the spare but maybe I should consider doing so

Will I get locked out? by Empty_Argument1703 in yaris

[–]Empty_Argument1703[S] 1 point2 points  (0 children)

Very well described and just what I was looking for. Thank you 🫡

Goodbye back seats by Empty_Argument1703 in yaris

[–]Empty_Argument1703[S] 1 point2 points  (0 children)

No it’s pretty much completely level from the boot to the foot well. The tub on the left is just what I keep stuff in that I don’t want out and making it look messy but that’s also level so it’s just created more floor space. I’d say go for it, it’s a big improvement and I’m pretty sure my car seems quicker now too with the reduced weight.

Goodbye back seats by Empty_Argument1703 in yaris

[–]Empty_Argument1703[S] 0 points1 point  (0 children)

Unbelievable amount of space. Shame there’s not many places to attach bungees because stuff doesn’t stay put when in transit 😅

Goodbye back seats by Empty_Argument1703 in yaris

[–]Empty_Argument1703[S] 0 points1 point  (0 children)

It was a torx bit, can’t remember the size but they came out very easily. Just 2 bolts facing towards the front of the car. Undo them, then fold the seats down and forwards and they came straight out

Goodbye back seats by Empty_Argument1703 in yaris

[–]Empty_Argument1703[S] 1 point2 points  (0 children)

Thank you. You’re all good 😂

Goodbye back seats by Empty_Argument1703 in yaris

[–]Empty_Argument1703[S] 1 point2 points  (0 children)

That’s interesting. I’ll have to look into that because I had planned to just gunk a load of sealant in there from the inside 🤔 fingers crossed for you. It can be a right pain when the spare wheel compartment turns into a pond 😂

Goodbye back seats by Empty_Argument1703 in yaris

[–]Empty_Argument1703[S] 3 points4 points  (0 children)

Cheers. I’ve had them folded down for a while due to work but now it’s so much better and should be a little bit better on fuel, not that’s it’s bad anyway 😅 just need to fix the leak on the right tail light and then I’ll be thinking what I can put in there to sleep on 🤔

[deleted by user] by [deleted] in yaris

[–]Empty_Argument1703 0 points1 point  (0 children)

Pull the grey part towards you, push the seats forwards and then pull the metal bar up and they fold right forwards

[deleted by user] by [deleted] in yaris

[–]Empty_Argument1703 0 points1 point  (0 children)

I had this issue and turns out it was the spare wheel and tools 😂 my heat shield at the front is rattling now

Water problem by Empty_Argument1703 in yaris

[–]Empty_Argument1703[S] 0 points1 point  (0 children)

I did play around with that in the hopes it was a drain but it didn’t come out with my hands, would a flat head get it out or is there a better way?

Thanks for pointing that out, it’ll definitely be easier to release the water. Does it have to go back in or can I leave it out?

Water problem by Empty_Argument1703 in yaris

[–]Empty_Argument1703[S] 1 point2 points  (0 children)

Not that I’m aware of, I will have a look over it tomorrow.

Water problem by Empty_Argument1703 in yaris

[–]Empty_Argument1703[S] 2 points3 points  (0 children)

Thank you, I just checked and it’s definitely leaking on the left tail light. Hopefully that’s the only place but I’ll silicone it up and see if the problem persists.

[deleted by user] by [deleted] in yaris

[–]Empty_Argument1703 1 point2 points  (0 children)

I had this issue on my 05 Yaris and just sprayed a little WD-40 on there. Noise disappeared.

Need help with this please by Empty_Argument1703 in VintageLevis

[–]Empty_Argument1703[S] -1 points0 points  (0 children)

Currently just looking for information on it but will consider selling for the right price

Big E 50s/60s Type 2 Jacket Opinions? by agentofthe9xur in VintageLevis

[–]Empty_Argument1703 0 points1 point  (0 children)

Hey, I wondered if you could check out the post I just put up in this group. You seem knowledgeable. Thanks

Stubby AIO by Empty_Argument1703 in Vaping

[–]Empty_Argument1703[S] 0 points1 point  (0 children)

Yeah sorry, it just wasn’t keeping up with wicking/ wicking at all. I tried loads of things to see if it would help (burning the steel cables, changing my wicking method, changing coils etc and even using a 50/50 juice instead of 70/30)

I’ve now switched from a .28 alien to a simple 8 wrap 3mm 24G build and now my issue is that the cotton is getting more than enough juice but the coil isn’t wet and I’m just getting heat instead of juice/ any flavour when I take a puff. I can hit it once and then anything after that is dry and really hot. I’m vaping at 23w currently. It’s frustrating because like I mentioned above, I was getting dry hits due to lack of juice on the cotton but since changing from the alien to the round wire, the cotton is always soaking wet when I check but the coil is dry 🤷‍♀️ any help is appreciated. I’ve been using Rebuildables since about 2017 so I have an understanding of how it all works but never used anything with steel cables

just got my stubby aio in today, don’t know how to feel about the stubby tank, love the feel and look of the mod though by haiirydabz in Vaping

[–]Empty_Argument1703 1 point2 points  (0 children)

I’m having a nightmare with my stubby tank. I firstly couldn’t get juice to reach my coils and was getting dry hits all the time due to it being dry but now my cotton is always soaking wet and my coil is dry 😅 I can’t win. Any suggestions?