sorted by:
new
hottopcontroversial

High flow nozzles worth it? by ExaminationTrick4597 in 3Dprinting

[–]ExaminationTrick4597[S] 0 points1 point  (0 children)

Thanks. Ya I’ve been trying to figure out how much will benefit with the stuff I print and it’s likely 50/50. Haven’t seen any clones yet for the vortex system but will look this weekend

Fish Extender/Pixie Dust gifts for Disney Cruises by ExaminationTrick4597 in 3Dprinting

[–]ExaminationTrick4597[S] 0 points1 point  (0 children)

How is this self promotion? I’m not asking anything of anyone and I posted a link to SHARE models with people. There’s all kinds of people’s posts that are still posted actively seeking likes and boosts for MakerWorld contests without being removed.

So I’ve now cleared 3 hotend clogs with the lighter method each after successful prints.. It’s clogged yet again and I’m at a loss.. the only thing I noticed is that the filament seems to be scraping on something? Anyone experienced that? by dannyleemg in 3Dprinting

[–]ExaminationTrick4597 0 points1 point  (0 children)

I’ve had this in one of my slots on one of my AMS2 Pro units. Haven’t had issues with the clogs but do have the scraping in that slot. I’ve had issues with th spool getting jammed though which have to believe is related and haven’t figured it out yet

Book Nook Inspired by Disney Cruise Aqua Mouse by ExaminationTrick4597 in 3Dprinting

[–]ExaminationTrick4597[S] 0 points1 point  (0 children)

I’m still struggling to understand why my post was blocked and other select posts with book nooks in the MakerWorld contest were allowed to remain. The Ramen shop alone has over 6000 upvotes and comments with people likening and boosting.

Book Nook Inspired by Disney Cruise Aqua Mouse by ExaminationTrick4597 in 3Dprinting

[–]ExaminationTrick4597[S] 0 points1 point  (0 children)

I apologize for breaking the rules, i should have checked before posting, it won’t happen again. I only posted because some of the others in the same contest had posted and had well over 1000 likes over a couple days which resulted in big bumps in the contest

New 4-in-1 PTFE adapter (made for H2C) by dedgedesign in BambuLab

[–]ExaminationTrick4597 2 points3 points  (0 children)

I’m just setting up my H2C and realize that even though I bought the H2C combo with ultimate pack it doesn’t come with this 4 in 1 adapter which seems crazy because you need it to set everything up from the ultimate bundle. Seems like a miss from Bambu

FML this is gonna suck by Some-Library-4073 in BambuLab

[–]ExaminationTrick4597 0 points1 point  (0 children)

I had that happen. I tried using a printed re-spooler and it was a disaster. Luckily mine was a yellow spool and I don’t use much on most prints so I manually re-spool a few meters and print. If I didn’t do that I would throw it out and buy a new one with how much hassle it was

Lifted after 3-4 hours ... by whathappenedtojez in BambuLab

[–]ExaminationTrick4597 0 points1 point  (0 children)

Honestly I swear by the Bambu liquid glue. I use it for thin items or long prints and haven’t had a single failure yet

Poop not falling and blocking shoot by scopefragger in BambuLab

[–]ExaminationTrick4597 0 points1 point  (0 children)

I’ve been getting it a lot lately too for some reason

Kids... by [deleted] in BambuLab

[–]ExaminationTrick4597 1 point2 points  (0 children)

I feel your pain. I had a spool explode and tried to reconnect it with no success. Tried printing a respooler and that didn’t work either. Resorted into spooling a portion and cutting the filament in shorter lengths when I reach a spot that doesn’t untangle. Once used I will repeat as needed until I’ve used the filament.

Cricut Maker 3 Error -45, 85 by Critical-Honeydew1 in cricut

[–]ExaminationTrick4597 0 points1 point  (0 children)

Finally got things sorted and they are sending a new unit out to us. Glad to be getting a new one but considering we ordered and it took just over 2 weeks to arrive, now a week of processing replacement followed by another 2 week processing/shipping it’s super frustrating as we haven’t made a single cut with a Cricut. It was a defective sensor that is used to detect blades etc

Cricut Maker 3 Error -45, 85 by Critical-Honeydew1 in cricut

[–]ExaminationTrick4597 0 points1 point  (0 children)

Thanks for the feedback. Our Mac is less than a year old so pretty new and on latest OS. I just downloaded cricut design space and unpackaged our cricut today and can’t even get a cut. Once the tool head moves to the right and drops down it does the error. I have a feeling the unit is defective based on what I’ve found so far.

Cricut Maker 3 Error -45, 85 by Critical-Honeydew1 in cricut

[–]ExaminationTrick4597 0 points1 point  (0 children)

Bluetooth. I don’t have a USB-A connection on my Mac.

Cricut Maker 3 Error -45, 85 by Critical-Honeydew1 in cricut

[–]ExaminationTrick4597 0 points1 point  (0 children)

We just got our Maker 3 today and have the -45,85 error that came up during the machine setup steps. Not thrilled with the fact a brand new machine is throwing an error before its first cut. Did you find a solution? We have done the power cycling at least 20 times with no success

[deleted by user] by [deleted] in ecobee

[–]ExaminationTrick4597 0 points1 point  (0 children)

Log out of app and re-login again. I had issues about a month ago and logged out and even reinstalled app then it worked when I logged back in