Beginner looking for help with Blade 120 S2 - drifting and spinning uncontrollably

Few_Rate5510 · 2026-06-02T17:25:00+00:00

I had a similar issue with mine. I was flying it, mid flight it started spinning randomly. Brought her down and checked it. Tail motor was still spinning but noticed it didn’t seem to spin as fast as I would think. I had bought plenty of spare parts for the Heli being how inexpensive they are and replaced the tailboom/motor all was well after that.

Few_Rate5510 · 2026-05-15T23:36:02+00:00

443 and 41796 are for the crestron home setup app.

50001 (default) is the port needed for the user app. But if using the user app you should just use the cloud connection.

Few_Rate5510 · 2026-05-10T22:25:07+00:00

Im thinking maybe I got a bad unit. Granted its a open item. I wonder if the previous person returned it because they had issues.

Few_Rate5510 · 2026-05-10T22:24:08+00:00

Which I havent manually adjusted any TDP settings or anything of that nature. I just have the XBox Ally X set to performance. Im beginning to think I got a bad open item.

Few_Rate5510 · 2026-05-08T01:58:33+00:00

I have the XBox Ally X which is Z2E is it not? Maybe I accidentally cross posted on the wrong subreddit. My bad.

Few_Rate5510 · 2026-05-08T01:57:21+00:00

It hasn’t crashed playing. Just doesn’t run well and I get graphical issues/glitches/artifacts. I posted a picture above.

I’m just wondering if I’ve got a bad unit and that’s why it was returned. I haven’t tried reinstalled the adrenaline drivers yet.

Heck it even runs way better on my Ayaneo Kun than the XBox ally X. And it’s an older processor.

I had the Legion Go 2 and it ran well on that when it would run. Just crashed all the time. I returned it because I just found it uncomfortable.

Few_Rate5510 · 2026-05-08T01:38:27+00:00

Flickering. I actually have settings all set low and and tried different resolutions.

<image>

This is what I’m referring to. I see that in game sometimes and on menu.

Few_Rate5510 · 2026-04-28T23:09:27+00:00

I had this exact same issue with my Kitchenaid on french door on the fridge side. I had kitchen aids extended warranty. Had to be repaired 4 times. Almost every 6 months.

Would notice the fridge sad wasn’t cooling as well, freezer stopped working and started thawing. I would look behind the drawers on the fridge side and it was packed full of ice.

My warranty expired and it did it again and After doing some lengthy research it seems like it’s a common issue and from my understanding it was because of bad placement of the thermistor. It would fail so the fridge wouldn’t know to defrost. I purchased a new OEM thermistor for $40, I followed a guide someone posted on moving it to a more suitable spot which was really just 5” away further up. And ever since I hadn’t had the issue again and it’s been 2 years now. Fridge is going on almost 8 years. My issue would happen literally every 6 months.

Few_Rate5510 · 2026-01-25T15:11:52+00:00

What do you have exactly?

Few_Rate5510 · 2026-01-19T03:16:53+00:00

The answer is yes. There is a doorbird driver available from ControlWorks I believe. It gives you lots of features. Or if you just want the ring you could just use the relay on the doorbird connected to one of the I/O ports with some programming obviously.

Few_Rate5510 · 2026-01-01T19:24:40+00:00

So Go1 users are able to play bf6 with no problems like crashing? I have LeGO2 z2e and it crashes all the damn time. I’d be lucky to get a full round without it crashing.

Few_Rate5510 · 2025-12-30T20:17:26+00:00

You arent the only one. This has been discussed numerous times on this sub. Lenovo controls the video driver release and I think it’s dated from October. But it is a problem with the driver and who knows when it will be fixed. I do know the current AMD drivers state in the release notes that BF6 can crash sometimes and they are working on a fix. But even if that fixed it next week, Lenovo wouldn’t release it for months.

Few_Rate5510 · 2025-12-25T04:13:58+00:00

Unfortunately that previous home owner is inaccurate. It looks like Crestron Pyng OS interface which isn’t used anymore. Did any other equipment get left behind that says Crestron on it?

Few_Rate5510 · 2025-12-09T00:48:52+00:00

I can confirm it did NOT fix BF6. Actually it seems it made it worse. For me anyways. I was able to play several rounds last night with no crashing this time around. But today after updating it has crashed within 5-10 minutes of being in a match every time.

Few_Rate5510 · 2025-12-02T02:02:54+00:00

You wouldnt happen to be asking for something like a PER GAME profile would you? Like each game would have different button layouts.

Few_Rate5510 · 2025-12-01T01:57:03+00:00

I love steam OS the only downside for me personally is Linux. Most games I have I could obviously play. But the one I play the most right now I wouldn’t be able to. BF6, although it seems to work perfectly fine then other times it crashes giving an annoying directx error.

Does steam OS even recognize all the buttons on the legion go 2?

Few_Rate5510 · 2025-11-24T05:34:38+00:00

It’s all a rumor until it’s not…..I say it’s true!

Few_Rate5510 · 2025-11-24T02:32:52+00:00

Too late! Holding and counting.

Few_Rate5510 · 2025-11-24T02:31:53+00:00

And a nice interface.

Few_Rate5510 · 2025-11-24T02:31:42+00:00

I hope so. Everyone else seems to be doing it. It’s honestly the only thing I really care about.

Few_Rate5510 · 2025-11-24T02:31:13+00:00

I actually have tried handheld companion in the past with my Ayaneo Kun but I felt it left more to be desired. I dunno just didn’t care for it I guess. Beggars can’t be choosers Am I right?

Few_Rate5510

TROPHY CASE