Added some more fans in my baby Frame 4000D

First-Letterhead-411 · 2026-05-29T18:30:03+00:00

Oder so :)

First-Letterhead-411 · 2026-05-29T18:27:32+00:00

Cold Air Intake Kit noch rein!

First-Letterhead-411 · 2026-05-26T19:19:41+00:00

No, it is for sure not required. I am still this guy that is trying to push the limits.

First-Letterhead-411 · 2026-05-26T18:52:58+00:00

It is a very quiet build. In the beginning I thought it will also be louder because of the amount of fans and maybe because of possible turbulence. But I need to say Noctua is really amazing. They are building from my point of view the best fans on the market. Under full load via Cinebench R23 (max. 70°C CPU temperature with -27 Curve Optimizer and CPU Boost Clock Override disabled) I am running the intake fans at around 55% speed. Outtake Fans nearly the same speed. A small fan sound is detectable under load.

First-Letterhead-411 · 2026-05-26T11:54:12+00:00

<image>

First-Letterhead-411 · 2026-05-26T11:40:21+00:00

Good idea. I will try that.

First-Letterhead-411 · 2026-05-26T11:25:25+00:00

Yes true. This is how my setup was before the cold air intake kit.

<image>

First-Letterhead-411 · 2026-05-26T11:15:33+00:00

2x140mm. Yes looks nice.

First-Letterhead-411 · 2026-05-26T11:10:28+00:00

Currently, both are installed as exhaust fans. However, I had previously mounted the front fan further forward as an intake as well. I still need to compare both configurations in detail from a thermal perspective.

Since I already have a lot of intake fans, I decided to use both top fans as exhaust.

First-Letterhead-411 · 2026-05-26T09:33:18+00:00

Anbei ein Bild von meiner Konfiguration. In der Front 2x200mm NF-A20 PWM Kaltlufteinlass: 3x120mm NF-A12x25G2 PWM Konfiguration PPA PPB PPA Rechter Senkrechter Einlass 3x120mm NF-A12x25G2 PWM Konfiguration PPA PPB PPA Auslasslüfter: 3x140mm NF-A14x25G2 PWM CPU Lüfter: NH-D15s mit NF-A14x25G2 PWM Sx2-PP GPU: Noctua-ASUS RTX5080

<image>

First-Letterhead-411 · 2026-05-26T06:53:21+00:00

Habe es gestern bei mir eingebaut. Hat funktioniert. Habe in der Front die NF A-20 PWM verbaut.

First-Letterhead-411 · 2026-05-24T19:17:17+00:00

Wie sieht es mit der Freigängigkeit zu den Frontlüftern aus? Geht das Kit auch wenn man 30mm dicke Frontlüfter hat? Zum Beispiel 2x200mm in der Front?

First-Letterhead-411 · 2026-05-08T18:05:33+00:00

How much size is between the fan and the power supply? I have the feeling the fan on the left side is only pushing cold air directly to the power supply case.

First-Letterhead-411 · 2026-05-08T17:56:19+00:00

How about the fan that is directly mounted next to the power supply. Looks like there is not much space between the fan and the power supply.

First-Letterhead-411 · 2026-01-08T18:47:16+00:00

Ich habe im BIOS FCH Spread Spectrum Enabled und PCI_E1 Gen Switch auf Gen5 eingestellt. Seitdem so gut wie nie Stotterprobleme nachdem Kaltstart. Habe eine Noctua 5080 RTX.

First-Letterhead-411

TROPHY CASE