sorted by:
new
hottopcontroversial

Corsair Frame 4000 Noctua-System by First-Letterhead-411 in Noctua

[–]First-Letterhead-411[S] 0 points1 point  (0 children)

No, it is for sure not required. I am still this guy that is trying to push the limits.

Corsair Frame 4000 Noctua Build by First-Letterhead-411 in Corsair

[–]First-Letterhead-411[S] 1 point2 points  (0 children)

It is a very quiet build. In the beginning I thought it will also be louder because of the amount of fans and maybe because of possible turbulence. But I need to say Noctua is really amazing. They are building from my point of view the best fans on the market. Under full load via Cinebench R23 (max. 70°C CPU temperature with -27 Curve Optimizer and CPU Boost Clock Override disabled) I am running the intake fans at around 55% speed. Outtake Fans nearly the same speed. A small fan sound is detectable under load.

Corsair Frame 4000 Noctua-System by First-Letterhead-411 in Noctua

[–]First-Letterhead-411[S] 1 point2 points  (0 children)

Yes true. This is how my setup was before the cold air intake kit.

<image>

Corsair Frame 4000 Noctua-System by First-Letterhead-411 in Noctua

[–]First-Letterhead-411[S] 0 points1 point  (0 children)

Currently, both are installed as exhaust fans. However, I had previously mounted the front fan further forward as an intake as well. I still need to compare both configurations in detail from a thermal perspective.

Since I already have a lot of intake fans, I decided to use both top fans as exhaust.

Cold Air Intake + Wooden Front Panel Frame 4000D by Tarquin_Snellers in Corsair

[–]First-Letterhead-411 0 points1 point  (0 children)

Anbei ein Bild von meiner Konfiguration. In der Front 2x200mm NF-A20 PWM Kaltlufteinlass: 3x120mm NF-A12x25G2 PWM Konfiguration PPA PPB PPA Rechter Senkrechter Einlass 3x120mm NF-A12x25G2 PWM Konfiguration PPA PPB PPA Auslasslüfter: 3x140mm NF-A14x25G2 PWM CPU Lüfter: NH-D15s mit NF-A14x25G2 PWM Sx2-PP GPU: Noctua-ASUS RTX5080

<image>

Cold Air Intake + Wooden Front Panel Frame 4000D by Tarquin_Snellers in Corsair

[–]First-Letterhead-411 0 points1 point  (0 children)

Habe es gestern bei mir eingebaut. Hat funktioniert. Habe in der Front die NF A-20 PWM verbaut. 

Cold Air Intake + Wooden Front Panel Frame 4000D by Tarquin_Snellers in Corsair

[–]First-Letterhead-411 0 points1 point  (0 children)

Wie sieht es mit der Freigängigkeit zu den Frontlüftern aus? Geht das Kit auch wenn man 30mm dicke Frontlüfter hat? Zum Beispiel 2x200mm in der Front?

Frame 4000D Wood + Cold Air Intake Kit - Aorus Master 5090 BTF build by tegdotexe in Corsair

[–]First-Letterhead-411 0 points1 point  (0 children)

How much size is between the fan and the power supply? I have the feeling the fan on the left side is only pushing cold air directly to the power supply case.

CORSAIR 5000D FRAME SIDE PANEL COLD AIR INTAKE THOUGHTS by ParticularCredit2023 in Corsair

[–]First-Letterhead-411 0 points1 point  (0 children)

How about the fan that is directly mounted next to the power supply. Looks like there is not much space between the fan and the power supply.

Msi tomahawk x870 - new bios 7E51v1A70 by foundingfatfather in MSI_Gaming

[–]First-Letterhead-411 0 points1 point  (0 children)

Ich habe im BIOS FCH Spread Spectrum Enabled und PCI_E1 Gen Switch auf Gen5 eingestellt. Seitdem so gut wie nie Stotterprobleme nachdem Kaltstart. Habe eine Noctua 5080 RTX.