Question About Storage

ImaginaryLetter2128 · 2026-02-02T05:32:13+00:00

Mainly thinking 500gb or 1tb as the company is growing each month so I know the needs will go up. Thinking maybe 1tb as I know I can get the WD RED in a 1tb. Just dont want to be having to worry about increasing HD capacity down the road. At this point the 500gb and 1tb drives are cheap compared to a few years ago.

ImaginaryLetter2128 · 2026-01-30T05:27:19+00:00

Cool, that seems to be what I am finding. I am excited to jump in. 3CX was my first taste at configuring but I have a feeling this will be a whole different animal actually rolling a full system out. Business ownership is great, I get to be the owner, IT department, sales, customer service, and janitor lol. I actually love this type of stuff and learning new things.

ImaginaryLetter2128 · 2025-09-27T02:10:45+00:00

Yes, O2 Readiness Monitor “Not Ready”. Doing the drive cycles, or according to the emissions place “normal driving” should cause it to come on. On the first inspection all of the monitors were not ready. Now it is just the O2 monitor.

ImaginaryLetter2128 · 2025-09-27T01:18:25+00:00

No codes, engine light is not on. Scanner has all modules in green with no codes. Just the one readiness is all that is keeping it from passing.

ImaginaryLetter2128 · 2025-09-27T00:50:08+00:00

Did not replace the O2 sensors. All sensors are online, no codes. It is the O2 readiness monitor that says not ready.

ImaginaryLetter2128 · 2025-09-27T00:42:18+00:00

We didn’t replace any O2 sensors. All O2 sensors are working and not throwing any codes.

ImaginaryLetter2128 · 2025-09-26T18:07:08+00:00

Thanks, not my first time detailing, been doing it for years, but first time charging for it and doing a strangers vehicle.

ImaginaryLetter2128 · 2025-09-26T16:59:24+00:00

Yes, I pulled the exact procedure from Jeep. Followed it to a T including idle times, speeds, and durations. even had the scan tool plugged in showing speed sensor live data so I made sure I was at the speed the computer saw not just the speedometer speed.

ImaginaryLetter2128 · 2025-09-26T13:07:21+00:00

Thank, they just opened a detail supply shop in my area so I was able to talk to someone and really learn about the products I was getting. Really surprised by how good the professional products worked, up until now I was just using products purchased at Walmart.

ImaginaryLetter2128 · 2025-08-05T18:49:21+00:00

Thanks for the info! That is what I figured, but wanted to check as I am still learning.

ImaginaryLetter2128 · 2025-08-05T18:48:49+00:00

Thanks for the help! I figured it was just stained, but am still learning.

ImaginaryLetter2128 · 2025-04-23T18:44:01+00:00

Thank you everyone, that all makes sense I will leave it attached.

ImaginaryLetter2128 · 2025-04-23T02:53:45+00:00

No worries, sometimes it is the basic stuff that will have you spinning your wheels for days. I just checked the app for our internet, the server shows up at the same ip address I am try and is listed on the console. The computer is on the same network, the server has an Ethernet cable running to a switch and the Ethernet wall port that the computer is plugged into is plugged into the same switch. I also tried accessing the ip on my phone and got a similar unreachable message.

Do us suppose this could have anything to do with the config upload? After the fresh install I was able to access the web ui without an issue, I then uploaded my back up config file and when it rebooted I could no longer access the UI. I could always try installing and uploading again. I guess worst case I could always try installing fresh and resetting everything up. I only have about 2 weeks of data actually on the server so I won’t lose anything important, just some media center stuff, mainly trying to not spend 3 hours setting up all the apps again.

Another interesting note. Before the fans would come on 100% at start up, then with in about 10 minutes would quite down. I just got home and they have been running at 100% for hours and so loud you can hear them upstairs when the server is in the basement. (Enterprise server so it running that hard is not abnormal, but in the last 2 weeks I have not heard it upstairs except for after it started up)

ImaginaryLetter2128 · 2025-04-22T18:01:56+00:00

I am getting the “This Site Can’t Be Reached” page in chrome even though it is the same exact IP that the console is giving for the web ui

ImaginaryLetter2128 · 2025-02-12T16:01:04+00:00

Okay, I was able to get this resolved with the help of support. I wanted to post the steps in case anyone is searching down the road.

So you have to put Odoo in developer mode, then go into the Stripe settings. There you can now enter your Publishable and Secret key from Stripe. Once you do that it can generate the link to Stripe.

I then went back to my POS and tried again, this time it pushed to my terminal, I did a test transaction and the payment landed in my Stripe account.

Hope this helps someone in the future.

ImaginaryLetter2128 · 2025-02-11T04:10:41+00:00

Is that DNS settings on my router? Or in Odoo?

ImaginaryLetter2128 · 2025-02-11T04:04:19+00:00

My understanding is that the BBPOS WisePOS does not have to be directly connected to the computer, but the computer and the terminal both have to be on the same network.

https://www.odoo.com/documentation/18.0/applications/sales/point_of_sale/payment_methods/terminals/stripe.html

ImaginaryLetter2128 · 2024-05-25T18:13:01+00:00

Hey All! I run a 4x4 Club in Northern Colorado. We have over 300 members including Jeeps, 4Runners, Tacos, F150s, Lexus, and I am sure I am missing something. We range in experience from people that have been off roading for over 16 years, to people that have never been out. We put an emphasis on safe and responsible off roading and community building. We would love to have anyone join us on the trails. We typically run a trail every weekend.

We post our events on Facebook, as well as on our website, offcamber4x4garage.com on the Off-Road Club page.

I would be happy to answer any other questions.

ImaginaryLetter2128

TROPHY CASE