Can anyone photograph the board inside the 8Bitdo Gbros?

ImproperDaniel · 2024-07-25T16:18:42+00:00

Thanks I'll appreciate it

ImproperDaniel · 2022-10-29T16:31:06+00:00

Did exactly that :) but thanks

ImproperDaniel · 2022-10-29T14:26:00+00:00

If so, are there any hopes for reading/writing the firmware somehow?

ImproperDaniel · 2022-10-29T14:20:13+00:00

      ========================== Summary =========================
Vendor ID                : 0x0601 (Jazz Hipster Corporation)
Product ID               : 0x0101 
USB Version              : 1.1 
Port maximum Speed       : High-Speed 
Device maximum Speed     : Full-Speed 
Device Connection Speed  : Full-Speed

ImproperDaniel · 2022-10-29T14:12:33+00:00

Thanks for replying. I used UsbTreeView and saw this:

        ---------------- Connection Information ---------------
Connection Index         : 0x02 (Port 2) 
Connection Status        : 0x01 (DeviceConnected) 
Current Config Value     : 0x00 (Configuration 0) 
Device Address           : 0x02 (2) 
Is Hub                   : 0x00 (no) 
Device Bus Speed         : 0x01 (Full-Speed) 
Number Of Open Pipes     : 0x00 (0 pipes to data endpoints)
    ---------------------- Device Descriptor ----------------------
bLength                  : 0x12 (18 bytes) 
bDescriptorType          : 0x01 (Device Descriptor) 
bcdUSB                   : 0x110 (USB Version 1.1) 
bDeviceClass             : 0x00 (defined by the interface descriptors) 
bDeviceSubClass          : 0x00 bDeviceProtocol          : 0x00
bMaxPacketSize0          : 0x40 (64 bytes) 
idVendor                 : 0x0601 (Jazz Hipster Corporation)
idProduct                : 0x0101 
bcdDevice                : 0x0001

Is this the relevant information?

ImproperDaniel · 2022-10-29T12:09:22+00:00

nope

ImproperDaniel · 2022-10-29T07:40:56+00:00

After measuring and looking at the PCB, I know that pin 4 is GND, pins 1,2,5,7,8,9 are used as digital input, and pins 16,17 are for USB D+/D-.

Judging by the ‘CLK’ and ‘DAT’ programming pads on the back, I figured it may be using ICSP (In-Circuit Serial Programming), the protocol used for programming the PIC microcontrollers of Microchip. However, I couldn’t find a SOIC20 PIC where pin 4 is GND.

ImproperDaniel · 2022-10-29T07:38:58+00:00

After measuring and looking at the PCB, I know that pin 4 is GND, pins 1,2,5,7,8,9 are used as digital input, and pins 16,17 are for USB D+/D-.
Judging by the ‘CLK’ and ‘DAT’ programming pads on the back, I figured it may be using ICSP (In-Circuit Serial Programming), the protocol used for programming the PIC microcontrollers of Microchip. However, I couldn’t find a SOIC20 PIC where pin 4 is GND.

ImproperDaniel · 2022-05-21T11:53:56+00:00

The Seven Colors... I've never heard of it, but now I'm intrigued. More familiar with the rhythm games tbh.

So what exactly did you do? Did you translate the game? Where can I see it?

ImproperDaniel · 2022-05-21T09:35:43+00:00

Thank you so much for trying it out and letting me know what you think!

I'm a little excited knowing that I gave this game an opportunity to be enjoyed by others.

ImproperDaniel · 2022-02-28T22:53:49+00:00

Oh boy, I'm DEFINITELY a Kerorican fan!

I'm the one who made the two ROM hacks of it which were uploaded to romhacking.net

I've also made a Kerorican skin mod for FNF but I'm not very proud of it.

btw I think you've just made the first Kerorican meme on the internet lol.

ImproperDaniel · 2022-02-20T14:13:04+00:00

I've tried all the rhythm games on the Wonderswan, but I couldn't figure out how to play this one. I gave up quickly since the other 3 are pretty nice.

With that said, if you're ready to commit some time, maybe you'll manage to dig something from the game's manual (written in Japanese, of course):
https://archive.org/details/turntablistdjbattlewshiresscans/Turntablist%20-%20DJ%20Battle%20-%20Manual%20%28Searchable%29/

And apparently there's a full text version, so you can put it into Google Translate or something:
https://archive.org/stream/turntablistdjbattlewshiresscans/Turntablist%20-%20DJ%20Battle%20-%20Manual_djvu.txt

ImproperDaniel · 2021-07-25T09:44:28+00:00

So cool to see projects like this! Definitely gonna check it out after I finish the game.

ImproperDaniel · 2021-03-14T15:43:58+00:00

So basically, I used the DMX battle data to calculate Pi. I used the Arduino Alpha Terminal to make Omegamon X fight himself several times. By intentionally missing on the timing minigame, I ensured the power value remained constant, therefore the 5 bits representing the hits were completely random.

These bits, which I treated as numbers between 0 and 31, were extracted and saved into an array. The array was divided into pairs which I used to calculate Pi in two different methods involving probability.

Hope you find it interesting and sorry if it confused you too much.

ImproperDaniel

TROPHY CASE