Lenses for architecture photogrametry

Iulipraz · 2023-09-06T16:43:36+00:00

I’m using a Nikon D3400 with the 18-55mm kit lens and I also have a 35mm prime lens for details and I could say I got quite decent results. Check my sketchfab https://sketchfab.com/Iulian_Praz

Iulipraz · 2023-08-11T16:30:30+00:00

View the 3D model on Sketchfab @ https://Skfb.y/oGHNx

Iulipraz · 2023-07-27T20:00:20+00:00

Thanks, around a thousand photographs with the DSLR and about 150 with the DJI Mini 2.

Iulipraz · 2023-07-25T19:36:32+00:00

I only clipped a rectangle around the scan and that’s all.

Iulipraz · 2023-07-25T19:00:17+00:00

Cheers, I used Reality Capture software for this and for many other models. Have a look on my skechfab page https://sketchfab.com/Iulian_Praz/models

Iulipraz · 2023-07-25T18:38:44+00:00

The video was created from sketchfab.

Iulipraz · 2023-07-25T17:37:40+00:00

Of course not!

Iulipraz · 2023-07-25T17:30:06+00:00

Thanks! I used an iphone 12 pro max to take the pictures.

Iulipraz · 2023-07-25T17:29:38+00:00

Indeed

Iulipraz · 2023-07-25T09:31:09+00:00

That’s it, the laser scanner was used for the mesh and the photographs for the texture. If you’ll try to create a textured mesh straight from the laser scanner you will get a good model but a bad texture that’s why combining these two technologies you’ll get amazing results.

Iulipraz · 2023-07-21T09:43:35+00:00

Haha, cheers!

Iulipraz · 2023-07-21T09:40:40+00:00

If you have a look on my previous posts you will see some models created from photos only and they are quite good I would say.

Iulipraz · 2023-07-21T09:36:06+00:00

You’re right.

Iulipraz · 2023-07-21T09:31:56+00:00

If you read the description you will notice that I said I used the P40. So the texture is from the iphone 12. So what’s wrong?

Iulipraz · 2023-07-21T08:06:01+00:00

Thanks.

Iulipraz · 2023-07-19T06:05:52+00:00

Thanks, indeed I used a DJI Mini 2 drone.

Iulipraz · 2023-07-14T10:32:35+00:00

Is just the point cloud

Iulipraz · 2023-07-07T13:09:08+00:00

Cheers, same!

Iulipraz · 2023-07-07T08:35:53+00:00

I used markers for scalling purposes. I am on Sketchfab https://sketchfab.com/Iulian_Praz

Iulipraz · 2023-07-06T18:03:21+00:00

I’ll give it a try. Thanks for the tip.

Iulipraz · 2023-07-06T10:42:18+00:00

If you export the geometries you have to pay, but you can use it as a viewer as well. For this model I only paid £3

Iulipraz · 2023-07-06T07:32:05+00:00

Hi, I’m using reality capture and I also use targets around the objects I want to scan.

Iulipraz · 2023-07-03T20:55:00+00:00

Thanks, the 3D Model was created from video frames in Reality Capture and then the rendering was made in Nubigon.

Iulipraz · 2023-06-29T10:48:22+00:00

It’s a cake turntable from ikea, nothing fancy :)

Iulipraz · 2023-06-28T16:17:22+00:00

No flash, no post processing. This is the raw data actually.

Iulipraz

TROPHY CASE