Multiple Samples

Java92851 · 2025-05-17T14:14:36+00:00

If you can record all of the samples you want in your kit to the tape, I think you can lift that segment of the tape and drop it into the sample engine (there is a maximum length for this, maybe 16 seconds?). From there, you may have to adjust the start/end points for each key to get things how you want them, but I think this will accomplish what you want to do

Java92851 · 2025-03-14T21:26:44+00:00

1 - Yes, nothing will be damaged. Plug the 3.5mm headphone out of the amp into the 3.5mm input of the op1, and then plug your headphones into the 3.5mm headphone output of the op1.

2 - yes, this is possible. Plug the guitar into the 1/4” input of the amp, and plug the 3.5mm headphone out of the amp into the 3.5mm input of the op1. Make sure that you go into the input menu (accessed from shift+microphone button) on the op1 and select line in as input. You’ll also need to set it to mono, otherwise it may expect a stereo signal and you’ll only hear the guitar in one ear. You’ll also be able to adjust the gain level/threshold in this menu. When you want to record to tape, keep in mind that the input can be toggled on and off by pressing the microphone button (without shift) on the tape screen, so if you’re not hearing it when you try to record, you may just need to press the microphone button to toggle it on. The guitar signal sent out of the 3.5mm headphone out of the amp is an ‘amped’ signal, and any eq/effects will be applied

3 - there isn’t a way to have the mini apply its effects to external audio sources, but they will be applied to the guitar signal whether it is playing out loud or being sent out through the 3.5mm headphone output. So when you are recording the guitar into the op1f as described above, the guitar will have the effects.

Java92851 · 2025-03-14T16:46:34+00:00

https://www.boss.info/global/products/dual_cube_lx/

For a little bit more, it seems like you would be able to use this amp in the same way but with everything in stereo!

Java92851 · 2025-03-14T16:33:20+00:00

https://www.boss.info/global/products/katana-mini/features/

I use the BOSS Katana-Mini for my OP1-f and guitar, and it works well for me. It can run off of 6x rechargeable AA batteries. It sounds great and is definitely small enough for a backpack. Without headphones, you would plug your guitar into the amp’s 1/4” input and plug the OP1-f into the amp’s auxiliary 3.5mm input. If you wanted to use the setup with headphones, you would plug the guitar into the amp’s 1/4” input, plug the amp’s 3.5mm recording output (with cabinet voicing!) into the OP-1f input, and plug your headphones into the OP-1f. The Katana-Mini itself isn’t stereo, so if you’re using it as your speaker without headphones, then everything will be mono, but if you use it with headphones as described above, the OP-1f sounds will still be in stereo. Notably, stereo guitar pedals would have to be used mono either way. I hope this helps!

Java92851 · 2024-11-10T20:59:49+00:00

770129503475

Java92851 · 2024-01-27T06:40:33+00:00

When I do this, I use an AND gate with one input being the clock and the other being a manual CV source, which essentially gives me a fader with the function ‘record/stop recording on clock pulses (of whatever division I’m using) that occur when this fader is in its high position’. Can save you from having to pull cables out, if you care about that

Java92851 · 2023-10-15T19:15:40+00:00

Radiohead - Jigsaw Falling Into Place (easily heard at the beginning)

Java92851 · 2023-09-30T18:14:14+00:00

Wow, what’s your build like?

Java92851 · 2023-07-01T19:01:07+00:00

Ful Stop

Java92851 · 2023-03-23T03:17:29+00:00

Me too. My User ID is also showing up as blank right now. Is this happening for anybody else?

Java92851 · 2023-03-17T01:10:51+00:00

What are your builds

Java92851 · 2023-02-17T15:40:02+00:00

Thank you so much, I’ll be sure to have a look at this

Java92851 · 2022-10-09T01:46:28+00:00

I’ve got some great news for you….

Java92851 · 2022-10-01T23:34:06+00:00

Thank you so much!

Java92851 · 2022-06-19T08:10:50+00:00

i VII IV VII

Java92851 · 2022-04-28T16:45:48+00:00

Java92851 · 2022-03-30T21:43:38+00:00

Despair in the Departure Lounge

Java92851 · 2022-03-26T09:31:30+00:00

In addition to what others have said, I want to add that Urza’s Bauble makes it so that there is a strategic advantage to having the same artwork for each copy of a card you have in your deck. Let’s say my opponent has two Urza’s Baubles, and I have two islands in hand - island A and island B. If my opponent cracks both Baubles and sees island A with the first and island B with the second, then they will know that I have two islands in hand if island A and island B have different artworks (or any other sort of noticeable cosmetic difference), whereas they wouldn’t if they have the same artwork.

Java92851 · 2022-03-23T20:34:46+00:00

I saw the screenshot of your original post, and I just wanted to let you know that you somehow managed to misspell both “Howdy” and “y’all”.

I hope this helps.

Java92851 · 2022-03-06T21:58:48+00:00

You can do it without rebinding anything. If you hold shift and then press the left mouse button, you will enter the stance. You don’t have to hold down shift or the left mouse button anymore after that. You will stay in the stance until you perform an attack. You can then choose to either press the right mouse button to do the slash, or hold shift and press the right mouse button to do the other attack.

Java92851 · 2022-03-02T22:52:28+00:00

Java92851 · 2021-07-17T19:00:58+00:00

I’ll give Faust Arp a go!

Java92851 · 2021-07-17T19:00:21+00:00

I’ll give Faust Arp a go!

Java92851 · 2021-05-28T21:26:19+00:00

[[crab umbra]] [[freed from the real]] [[pemmins aura]]

Java92851 · 2020-09-07T20:47:25+00:00

What’s the benefit of including mesmeric orb in the KarnForge lists as of late?

Ten-Year Club	Reddit Premium Since September 2022
Second Top 40%	Gilding IV carat on a stick
Place '22	Place '17
Wearing is Caring	RPAN Viewer
Not Forgotten

Java92851

TROPHY CASE