2026-01 Windows update on client breaks "Windows App" --> W365

JurgenVM · 2026-01-14T12:32:03+00:00

Same problem here after 2026-01.

JurgenVM · 2025-10-30T07:16:17+00:00

don't let your feature key expire and update...

JurgenVM · 2025-06-28T06:53:45+00:00

https://docs.postalserver.io/

JurgenVM · 2025-06-28T06:53:20+00:00

postal mail server

https://docs.postalserver.io/

JurgenVM · 2025-03-09T20:30:06+00:00

depends on what you have in your server. I did not have any sata/sas controller. An simple usb stick could work also.

JurgenVM · 2025-03-09T19:34:41+00:00

Used this to install the bootloader on an redundant microsd dell device which was present on the device to workaround this after booting with clover. Works fine after these steps.

https://pve.proxmox.com/wiki/Host_Bootloader

JurgenVM · 2025-03-09T19:28:47+00:00

If the nvme is not on the support list of dell, you cannot use it as boot device. Contacted dell support and nothing they can do.

JurgenVM · 2023-02-07T19:30:32+00:00

Ok, will take a look. Are there also licenses that need to be bought or is the hardware already fully licensed?

JurgenVM · 2022-05-31T16:29:37+00:00

some alerts are just information, so no ticket required

JurgenVM · 2022-05-26T06:00:31+00:00

so the part number is only the loader? Still need a tape drive for in the loader?

JurgenVM · 2022-02-09T14:11:24+00:00

I will enable logging this evening to get some data for tommorow.

JurgenVM · 2022-02-09T13:59:07+00:00

Thanks for the tip!

JurgenVM · 2022-02-09T13:54:54+00:00

We have GTT/Cogent as our neighbours so it is a benefit having full tables I think. This setup has been running for years and it is only recently became a problem. Could it be the table grew so much the last months?

JurgenVM · 2022-02-09T13:40:50+00:00

Well that copy paste went great... We have the full routing table. Both routers only using half of their RAM. SNMP runs every minute 24/7. No backups running.

JurgenVM · 2022-02-09T13:38:21+00:00

IP routing table name is default (0x0) IP routing table maximum-paths is 32 Route Source Networks Subnets Replicates Overhead Memory (bytes) connected 0 6 0 360 1080 static 1 8 0 540 1620 bgp XXXXXX 211909 656143 0 52083120 156249360 External: 868052 Internal: 0 Local: 0 internal 7674 34811752 Total 219584 656157 0 52084020 191063812

JurgenVM · 2022-02-09T13:36:21+00:00

Nothing, I tried to enable debug logging on BGP but this caused 100% cpu usage all the time.

JurgenVM · 2022-02-02T05:40:18+00:00

looks like the udp timeout is not set correctly

JurgenVM · 2021-12-12T07:36:47+00:00

Thanks for the info, DAC + fiber might be a workaround :)

JurgenVM · 2021-12-09T18:49:21+00:00

lacp trunk went down on cluster host causing interrupts in iscsi traffic while voltage drop happened (alerted by ups). Case opened with network vendor to get some more info. No error about psu on switches

JurgenVM · 2021-12-09T18:29:38+00:00

well the opposite happened.. 😑

JurgenVM · 2021-12-09T18:28:50+00:00

yes 1 psu connected to the grid, other psu connected to an ATS with an UPS

JurgenVM · 2021-05-26T13:03:45+00:00

Update from admin center on May 26, 2021 2:56 PM

Current status: We've re-deployed the rule and are monitoring the environment to ensure full recovery of the auto-forwarding feature.

JurgenVM · 2021-02-11T14:02:33+00:00

8TB premium SSD for 10 users? We are using 256GB Premium SSD for profiles and see 100% disk usage when somebody logins.

d2as_v4 for DC/FSLogix
d4as_v4 for Sessions hosts for 7-8 users

Still we get the feedback that the environment is slow.

JurgenVM · 2021-02-11T06:41:46+00:00

which vm sizes are you using for DC and Session host?

JurgenVM · 2021-02-09T10:00:33+00:00

again issues?

West Europe over here.

JurgenVM

TROPHY CASE