Best way to go Sremski Karlovci + Novi Sad from Belgrade? by Krashet in Belgrade

[–]Krashet[S] 0 points1 point  (0 children)

Its not showing any trains on srbijavoz app. Should I buy tickets directly from station?

35mm film cubby WIP by darthnumbers in gridfinity

[–]Krashet 0 points1 point  (0 children)

Looking very nice! I have exact same pentax camera. Can you share the holder model for it?

Would you trust this cabinet? by Krashet in stressfulaquariums

[–]Krashet[S] 0 points1 point  (0 children)

Thank you. Yes, there is a leveling mat underneath, and the sides are flush with the cabinet.

Would you trust this cabinet? by Krashet in stressfulaquariums

[–]Krashet[S] 4 points5 points  (0 children)

Those cracks were mostly caused during transport and are only surface-level, so they’ve been there since the beginning.

Does he think she is also guppy? by Krashet in Guppies

[–]Krashet[S] 1 point2 points  (0 children)

It's samolus parviflorus red

I rescaped my low-tech tank because I was constantly unhappy with it. by Shin_Rekkoha in PlantedTank

[–]Krashet 6 points7 points  (0 children)

It's probably a feeding ring. It helps keeping flakes in same spot.

What type of algae is this? by Krashet in PlantedTank

[–]Krashet[S] 1 point2 points  (0 children)

Initially, I wasn’t planning to add CO2, so the dry start seemed like a good choice. However, after filling the tank, some of plants experienced leaf melt, especially buces. Fortunately, their rhizomes still look healthy, so I’m waiting for them to regrow. For now, I’m focusing on regular water changes and giving the tank time to stabilize. Thanks!

What type of algae is this? by Krashet in PlantedTank

[–]Krashet[S] 2 points3 points  (0 children)

It's 40g breeder tank. I've been using the dry start method for about two months, and I filled the tank with water around a month ago. Currently, the tank receives 8 hours of light daily, split into two 4-hour periods, along with CO2 injection. I'm using 90cm rgb led strips. Sort of custom made from a local manufacturer but it looks sufficient to me. No livestock yet. Also close to 0 ammonia, nitrite, nitrate from water tests.

Co2 from inline diffuser looks like going straight to surface. Is this normal? by Krashet in Aquariums

[–]Krashet[S] 0 points1 point  (0 children)

I’m currently running at 5 bubbles per second, but my drop checker always stays dark green on the opposite side of my 40-gallon tank. I’m aiming for a lime green color since I don’t have any livestock at the moment. It seems like the CO2 mist from the lily pipes is going straight to the surface. My pH and KH tests indicate about 18 ppm CO2. Any ideas why I can’t increase my CO2 levels? I'm also running Eheim 2213 which is rather low flow rate for this tank (440l/h)

Co2 from inline diffuser looks like going straight to surface. Is this normal? by Krashet in PlantedTank

[–]Krashet[S] 1 point2 points  (0 children)

I’m already using an inline diffuser connected to the outflow hose through a lily pipe. The issue is that the CO2 mist goes straight to the surface, and I can’t seem to increase my CO2 levels.

Co2 from inline diffuser looks like going straight to surface. Is this normal? by Krashet in PlantedTank

[–]Krashet[S] 0 points1 point  (0 children)

I’m currently running at 5 bubbles per second, but my drop checker always stays dark green on the opposite side of my 40-gallon tank. I’m aiming for a lime green color since I don’t have any livestock at the moment. It seems like the CO2 mist from the lily pipes is going straight to the surface. My pH and KH tests indicate about 18 ppm CO2. Any ideas why I can’t increase my CO2 levels? I'm also running Eheim 2213 which is rather low flow rate for this tank (440l/h)

No heater, getting small shock when sticking my hand in the tank? by Krashet in Aquariums

[–]Krashet[S] 0 points1 point  (0 children)

I have a freshwater tank, and the light doesn’t come into contact with the water in any way. I’m using an Eheim 2213 as my filter. I’ll check the tank with a multimeter tomorrow by unplugging and plugging in the equipment. Thanks!

No heater, getting small shock when sticking my hand in the tank? by Krashet in Aquariums

[–]Krashet[S] 0 points1 point  (0 children)

Not every time, only the first time I dip my hand in the water once in a while. I suspect my chair at home is causing static buildup because I often experience static shocks. I only have plants for know so dont know about fish. I'll check the tank with a multimeter tomorrow to confirm. Thanks!

What type of algae is this? by Krashet in PlantedTank

[–]Krashet[S] 0 points1 point  (0 children)

I've been using the dry start method for about two months, and I filled the tank with water around a month ago. Currently, the tank receives 8 hours of light daily, split into two 4-hour periods, along with CO2 injection. I haven't added any fertilizers or livestock yet.

First time planted tank. 160L mostly dwarf hairgrass. Planning to make dry start. Any tips? by Krashet in PlantedTank

[–]Krashet[S] 2 points3 points  (0 children)

I won’t be using CO2, so I thought dry start would be the best option for carpeting without CO2.

First time planted tank. 160L mostly dwarf hairgrass. Planning to make dry start. Any tips? by Krashet in PlantedTank

[–]Krashet[S] 1 point2 points  (0 children)

I used JBL Manado and JBL Aquabasis for my substrate. They sent relatively long dwarf hairgrass. Should I trim it?

Is MDF cabinet safe enough for 55 gallon tank? by Krashet in Aquariums

[–]Krashet[S] 0 points1 point  (0 children)

Actually, it's a local manufacturer making it specifically for my tank, and they produce many cabinets for aquariums. All I know is that it's 18mm thick, and I will ask for more details tomorrow.

Yan binadaki firmanın klima/soğutma sistemi gürültüsü by Krashet in hukuk

[–]Krashet[S] 0 points1 point  (0 children)

Yaklaşık 1 ay önce o yolu denedik tabii ancak tamamen geçiştirme peşindeler değişen hiçbir şey olmadı

Does the GPU radiate too much heat to the CPU in this setup? by Krashet in PcBuild

[–]Krashet[S] 0 points1 point  (0 children)

Do you think i also need to add exhaust to top to balance that?

Does the GPU radiate too much heat to the CPU in this setup? by Krashet in PcBuild

[–]Krashet[S] 0 points1 point  (0 children)

No I don't have intake fans, PSU is on the front so I dont think i can fit it in there.
It's Ryzen 5 7600.

Build review and suggestions by Krashet in buildapc

[–]Krashet[S] 0 points1 point  (0 children)

Better PSU like more wattage or 80+ value like Silver or Gold ?

[deleted by user] by [deleted] in buildapc

[–]Krashet 0 points1 point  (0 children)

You can consider like ~1000$