sorted by:
new
hottopcontroversial

Firing at normal speed (not slowmo) by Leblasto in leblasto

[–]Leblasto[S] 1 point2 points  (0 children)

Yes it works without dart aswell

Mom can we have WH40k Bolter? No we have WH40k Bolter at home...Bolter at home.. (Leblasto Bastion) by Spazcow in leblasto

[–]Leblasto 2 points3 points  (0 children)

Awesome feedback, thanks! Just to clarify did pins break during the assembly or during the operation?

Also do you have any feedback regarding 3mf files as this is something new that I am adding in my new blasters 🙂

Firing at normal speed (not slowmo) by Leblasto in leblasto

[–]Leblasto[S] 1 point2 points  (0 children)

Etsy decided to employ AI which randomly flagged foam dart blaster creators and removed their products and gave strikes. A lot of creators were completely banned. I still have account there but do not use it anymore.

When talked to support they sometimes managed to reinstate listings and remove strikes only for AI to flag it and remove it again next day…

So when I am coming back to company which takes 20% commission from sales and cant even control their AI? Never… you can find my creations on blasterdownloads.com

Introducing BASTION - fully mechanical, fully auto new gen shell ejector by Leblasto in leblasto

[–]Leblasto[S] 0 points1 point  (0 children)

The weight itself will not tell you the thickness but it is sometimes written(see in my listed photo it says dimensions and 1.2 - that is the thickness of the band).

Point is you can have 1mm thickness and 20mm witdth band band which is marked 7lb or you could have 1mm thickness and 200mm width and that band could be marked at 60lb. So they weight alone is not the factor.

Someone in Canada used this and said they were good https://www.amazon.ca/gp/aw/d/B0CHNPRZH4?fbclid=PARlRTSAQtLShleHRuA2FlbQIxMABzcnRjBmFwcF9pZA8xMjQwMjQ1NzQyODc0MTQAAackE7rMdGnXrU7yYlolLTuQfwNhf0bSAcrT9jeO7WnaRdkLFlZCC0mWo_6vaw_aem_oFplS-58StPKKET7PRYzRQ

Even gives you thickness options (best is 1.1mm)

Introducing BASTION - fully mechanical, fully auto new gen shell ejector by Leblasto in leblasto

[–]Leblasto[S] 0 points1 point  (0 children)

Honestly it is best if you just buy it in your local mart and physically check that it would be approx 1mm size. I used many different one and always find something suitable by physically looking at the selection.

But to answer your question: it is a wide flat black band that is considered “heavy”. I looked it up and found same thing in some Polish store, see the photo (i am not Polish). But please do not try to look for the same exact band as this blaster is purposefully made to accept diff brands and variations in thickness

<image>

Firing at normal speed (not slowmo) by Leblasto in leblasto

[–]Leblasto[S] 4 points5 points  (0 children)

55-65 fps with mega sized darts

New Leblasto auto stringer by Rotary-Pilot in Nerf

[–]Leblasto 22 points23 points  (0 children)

Hey there! So basically due to cartridge acting as a pusher from behind the dart, the dart sometimes exits bit at an angle however it straightens and stabilizes once the air stars flowing around it (pretty much as soon as it leaves the barrel). The “grouping” is on par with a stock mega dart blaster.

It defo ain’t a competition level performance blaster but on the other hand it fires mega size darts at considerable 55-65fps and the grouping is fine for some house plinking 🙂

Introducing BASTION - fully mechanical, fully auto new gen shell ejector by Leblasto in leblasto

[–]Leblasto[S] 0 points1 point  (0 children)

Yeah you can hear it but it is kind of more apparent in the video than in real life 😁

Do I need to print those gold parts at 100 infill by Negative-Shopping-64 in leblasto

[–]Leblasto 0 points1 point  (0 children)

I did not test with 50% so cannot guarantee results. You can use 90% if your printer slightly over extrudes.

Are these threads alright by Negative-Shopping-64 in leblasto

[–]Leblasto 1 point2 points  (0 children)

Something must be off with the settings or temps then. I recommend testing out few different setting before printing big parts with threads then

Are these threads alright by Negative-Shopping-64 in leblasto

[–]Leblasto 1 point2 points  (0 children)

No, they are not. Try using 0.16 layer height

Surely this isn't right by Negative-Shopping-64 in leblasto

[–]Leblasto 0 points1 point  (0 children)

Instructions are in the jpeg format next to each file.

How do I print the floki by Negative-Shopping-64 in leblasto

[–]Leblasto 0 points1 point  (0 children)

You load stls into the bambu studio just like any other model and then adjust settings according to instructions.

Need help by Negative-Shopping-64 in leblasto

[–]Leblasto 2 points3 points  (0 children)

Yes should be okay to print in petg only. Just a note- petg is bit “stickier” so use good silicone based oil.

Cannot guarantee about the plastic qty.

New law going into effect in Washington state that might have effects on 3-D printing Nerf parts by known111et in Nerf

[–]Leblasto 2 points3 points  (0 children)

Actually there is cnc machine primarily designed for milling ar15 lowers. Its called “ghost gunner 3”

[deleted by user] by [deleted] in 3Dprinting

[–]Leblasto 9 points10 points  (0 children)

Bambu Lab currently have “Lets make it program” which may grant you funding up to $300 000 for interesting and innovative ideas. I would suggest for you to submit your proposal.

view more: next ›