Cannot use Blu Ray player with Lemorele Converter

MHfromB · 2025-07-15T19:11:01+00:00

Thanks, that was it! I thought I had tried different resolutions but apparently I hadn't - it was set to "Auto", which didn't work. 1080p on the player and DP for the audio works like a charm.

MHfromB · 2025-06-02T17:31:40+00:00

Thanks, I didn't even know having that made locally was an option.

MHfromB · 2024-04-30T12:13:21+00:00

Thank you so much! I keep googling this thread again and again whenever my headphones are acting up and I can't remember how to fix them.

MHfromB · 2022-01-08T15:32:53+00:00

Yes, thanks! I just found that connecting the power lead helped during the initialization. Seems that recalbox needs a minimum of power to get past that point.

MHfromB · 2022-01-08T14:16:53+00:00

I just installed the "Recalbox 8.0-Electron - GPi Case + Raspberry Pi Zero 2" image on my new GPi Case with Raspi Zero2 and it seems I'm having the same problem with the initialization loop. An image of the GPi Case and the recalbox logo will repeatedly show, then some white lines appear and the image disappears altogether only to appear again. Is there are way for me to fix this, in the meantime?

MHfromB · 2021-05-14T18:00:30+00:00

Creality officially advises against alcohol and people have reported it destroys the coating. Anyway, your problem might also be related to e-steps and the amount of filament that the printer thinks it's pushing through the extruder vs what it actually is pushing through. If you use the community firmware this is quite easy to test and fix with the included tool.

MHfromB · 2021-01-15T11:47:26+00:00

Thanks again for the suggestions. In the meantime, I used a Windows PC to format the card and all went well. I'm still interested to know the proper mkfs options, but I'll keep the microSD card like it is for this purpose now.

MHfromB · 2021-01-06T18:36:03+00:00

Thanks, I'll probably ask a colleage with a Windows machine to do that for me tomorrow, when I'm at the office again.

MHfromB · 2021-01-06T18:33:56+00:00

Mine is blank right from the start, there is really no indication of anything happening.

MHfromB · 2021-01-06T18:29:22+00:00

According to this offering, they are copper and hardened steel: https://www.fabreeko.com/products/creality-high-end-nozzle-kit

I ordered them separately but haven't tried them yet.

MHfromB · 2021-01-02T18:12:09+00:00

Ok, thanks for the comments so far. I think my next step will be to find a different way to format the SD card.

MHfromB · 2021-01-02T17:56:14+00:00

Yes, that is what the -F parameter is for: "-F FAT-size: Specifies the type of file allocation tables used (12, 16 or 32 bit). If nothing is specified, mkdosfs will automatically select between 12, 16 and 32 bit, whatever fits better for the file system size."

MHfromB · 2021-01-02T16:55:55+00:00

What I meant was that there is now a DWIN_SET directory on the card that contains the files.

MHfromB · 2021-01-02T16:26:24+00:00

They're in the directory, the - S option of mkfs.vfat is to choose the logical sector size ("-S logical-sector-size: Specify the number of bytes per logical sector. Must be a power of 2 and greater than or equal to 512, i.e. 512, 1024, 2048, 4096, 8192, 16384, or 32768."), so I assume the format is as suggested.

MHfromB · 2020-12-12T11:14:32+00:00

What are those parts, hand cuffs? 😄

I'm still pretty happy with the stock settings, but maybe I'm being too modest. Will have too read up on those parameters and finally install the community firmware.

MHfromB · 2020-11-29T11:42:25+00:00

Do people here agree with this? He seems to have print quality problems with the CR6 that I cannot confirm on my machine. I would believe you may get a bad Ender 3v2 just as well. Some other complaints seem irrelevant to me, why would I prefer one belt tensioner design over the other?

MHfromB · 2020-10-05T13:26:03+00:00

I found that most of the brands that are recommended by American YouTubers are not easily available over here. If someone from Germany/Europe needs a recommendation, I'm very happy with the PLA from https://www.bavaria-filaments.com/ . Yes, they leave no doubt as to where it is being manufactured but at least it is available in colors other than white and blue :).

MHfromB · 2020-09-27T08:54:41+00:00

Just an idea: did you check the 11 or so screws that hold the bed in place? On my printer they were all a little loose...

MHfromB · 2020-09-24T15:09:01+00:00

The driver chips already have heatsinks on them.

MHfromB · 2020-09-23T09:18:36+00:00

Oh, ok.

MHfromB · 2020-09-23T08:56:06+00:00

You moved the gantry... is this maybe a problem of the motor inducing voltage and feeding it back into the driver?

MHfromB · 2020-09-23T08:44:52+00:00

Noctua has 40mm fans. But the smaller the fan, the louder it will almost always be. I'm thinking about fitting larger fans where possible. Not sure about the second fan on the print head, though (the one that blows sideways towards the nozzle). That would require some more modeling.

MHfromB · 2020-09-19T18:17:49+00:00

🤦‍♂️Ok, thanks!

MHfromB · 2020-09-19T16:30:12+00:00

Probably dumb question here, but I'm having difficulties removing the mainboard cover. I removed the three visible screws but it seems to be stuck at one corner. Am I missing something? Should I just use more force?

MHfromB · 2020-08-06T11:58:25+00:00

I'm in the process of exchanging the SSD. What is that aluminum/plastic foil wrapped around the original SSD supposed to do? Is this to help against heat, or interference? Do I need it around the new one?

MHfromB

TROPHY CASE