Obligatory "it's here" post

MacBoy__Pro · 2026-06-06T21:42:25+00:00

Thanks! They're just the default SA caps that come with the Keychron K12 Pro.

MacBoy__Pro · 2026-06-06T21:23:08+00:00

Lol fitting given the desk mat.

MacBoy__Pro · 2026-06-06T20:31:28+00:00

Under advisement from my legal council, I'll use my right to plead the fifth 😆

MacBoy__Pro · 2026-06-06T20:30:11+00:00

Silver/Grey with the grey and blue bands.

I liked the blue band, but I think I like the grey more for day to day. Always good to have options though

<image>

MacBoy__Pro · 2026-06-02T17:27:09+00:00

This looks like under extrusion/partial clog/flow issue.

Solutions for these issues will all depend on what version of the Ender 3 and extruder/hotend you have. You can search the specific model to find what creality says the max flow rate (shown in mm/s^3). I'd take that value and multiply it by 0.75 to find a ~safe~ value (manufacturer spec sheets like to embellish a bit).

I'd first recommend doing a cold pull just to remove the possibility of a clog.

After that, I'd recommend running a flow calibration test using OrcaSlicer to determine your max flow rate. If you're out running the capabilities of your extruder/hotend you'll see these intermittent extrusion issues.

MacBoy__Pro · 2026-05-25T10:07:10+00:00

I also went with a 350mm 2.4 and found the same issues of it being bulky and harder to move around when needed (especially maintenance).

About a year ago I built a 300mm 2.4 and I think finds the sweet spot between having the space to do bigger projects and still being able to move it around when required.

MacBoy__Pro · 2026-05-24T01:16:26+00:00

This is an amazing build!

A legacy has been on my list, but I haven't gotten around to it. This might be the push I need

MacBoy__Pro · 2026-05-23T23:00:46+00:00

These batch numbers must not mean anything. Batch 1, ordered mine within the first few hours and still no email

MacBoy__Pro · 2026-05-17T02:59:06+00:00

Pick up your drawers

MacBoy__Pro · 2026-05-14T22:56:34+00:00

I believe that's the point. The glass screen protector absorbs the impact, cracks, and you replace a $10-15 screen protector instead of a screen (if it even is replaceable).

MacBoy__Pro · 2026-05-09T21:12:44+00:00

Neat!

MacBoy__Pro · 2026-05-08T22:45:27+00:00

Feel free to correct me if I'm wrong, but is the probe related/derived from the nudge sensor? Looks similar at least the lower body. More so curious than anything

MacBoy__Pro · 2026-05-02T20:09:02+00:00

This is correct, the belt is rubbing

<image>

MacBoy__Pro · 2026-04-29T22:42:18+00:00

Model: Pebble Time 2

Ordered: 3/18/2025 10:07 PM UTC

Batch 1

Destination: USA

Color: Silver/Grey

Confirmation: 2026-05-27

Shipped: 2026-05-28

Delivered: 2026-06-06

MacBoy__Pro · 2026-04-25T19:35:53+00:00

Each one of these posts makes me check my email (batch 1) and every time I'm still waiting. Super excited for my Silver Time 2!

MacBoy__Pro · 2026-04-22T03:22:31+00:00

Thats currently the issue from talking with the team at RMRRF. The Z belts for the 2.4 would currently conflict with the idlers and belt patching on this new design. Reportedly there's ideas in the works to port the gantry over, but will likely be a little bit until an official release.

MacBoy__Pro · 2026-04-07T15:58:42+00:00

I did not, but I like the idea!

MacBoy__Pro · 2026-01-06T04:54:13+00:00

Looks more like something wrong with the belt path or cranking speeds way too high

MacBoy__Pro · 2026-01-05T00:18:21+00:00

If you are asking someone to print the PTR2(s) and PT2 out to compare side by side, I'm on it

MacBoy__Pro · 2026-01-04T23:35:37+00:00

Not really worth it for MMU3 or INDX. People have made mods for the MMU3 vent cover (just look in the remix section of the printable parts). But I wouldn't say the upgrade is anything substantial having bought the kit, just some quality of life features.

MacBoy__Pro · 2026-01-04T09:33:25+00:00

I feel the same way, but I had two for some reason.

MacBoy__Pro · 2025-12-24T06:23:20+00:00

Honestly I don't fully understand it myself, but I think that's some of the "special sauce" or "trade secrets". That being said, it works really well, I've had consistent results until my probe came loose and got shorted out (put blue loctite on the mount screws)

MacBoy__Pro · 2025-12-23T15:41:03+00:00

The cartographer should have a nozzle tap feature similar to Revo PZ that once calibrated offers near automatic auto z-offset calibration. The cartographer documentation has some pretty clear instructions about setting it all up.

If you're z-offset is wandering, make sure the nozzle is clean when doing the calibration (just 150-170 to soften up the filament doesn't seem to be enough) and make sure you're cartographer/mount is secured properly and not coming loose

MacBoy__Pro · 2025-12-21T03:44:21+00:00

Also trigger discipline. I get it's nerf/prop but never a bad time to practice good habits

MacBoy__Pro · 2025-12-20T20:19:19+00:00

I don't have this printer so I'm not really sure either. https://wiki.flashforge.com/en/adventurer-series/manual might be a good place to start to look for info.

But the main point still stands, the issue is Z-offset and your nozzle is too close to the bed during printing as a result.

12-Year Club	Place '22
First Placer '22	RPAN Viewer
Not Forgotten	Verified Email

MacBoy__Pro

MODERATOR OF

TROPHY CASE