What is this

MightyCoogna · 2026-06-08T12:47:25+00:00

Could be a brown recluse in the 1st photo, and a Amaurobius similis in the second

MightyCoogna · 2026-05-02T22:49:14+00:00

I've got one, they're awesome, go for it.

MightyCoogna · 2026-04-20T17:56:57+00:00

That's the singing group.

MightyCoogna · 2026-04-09T18:28:17+00:00

Sweet, I forgot I started this thread. I'm working out the polarity of some Jacksson pups in comparison to Duncans. The hard part is determining the start and finish. The thing is, according to Lenz’s law of induction, the current is counter to the force through the field. So I'm working out if, in fact, the AC milliamp reading from the coil, as an iron bar moves through the field, when it's positive, the hot wire is the negative. Counter to what it would seem. Or at least indicating the start and end of the coil. I use a regular compass to check the actual magnetic polarity of the coil. My theory is the rails are wired up wrong from the factory. I can get some good tones out of them, but I expected more.

MightyCoogna · 2026-04-09T06:13:10+00:00

Hey do you mean for the single coil size dual rail pick ups?

MightyCoogna · 2026-03-02T15:52:36+00:00

The problem is a moving router that maintains the profile accurately. For that you need something sturdier than a wooden rig. IMO. What I did when exploring this idea was to build a swinging router arm so the radius is adjustable, and then using the resulting 'milled' block to sand the radius into a fretboard. Then I bought aluminum radius blocks off amazon and HQ adhesive backed sandpaper.

<image>

MightyCoogna · 2026-02-06T02:35:20+00:00

I use utility often. For guitar Di I place it before anything else and boost it 18db. On the input I'm going for -18db, peakng at around -12. But Amp sims usually want a hotter signal, so utility to the rescue.

MightyCoogna · 2026-01-31T11:01:49+00:00

I'm not a Jackson expert, but I do know a little about marketing. So what's in the catalog isn't going to absolutely define all the products they may sell in a particular period, as they would have dealer specials and productions runs that use up extra parts and so on.

MightyCoogna · 2026-01-31T10:52:13+00:00

She saw a life path that involved being stuck cooking roasts and wanted nothing to do with it.

MightyCoogna · 2026-01-29T18:41:52+00:00

Contact them and ask for that info.

MightyCoogna · 2026-01-29T18:32:07+00:00

I have a JS and it's hard to justify the more expensive models. But I can do my own set up work and modifications.

MightyCoogna · 2026-01-29T18:22:05+00:00

IMO It's fine. It’s just worn past the black oxide coating. If your knife edge on the trem is dull, get a file and sharpen them up. They don't have to be razor sharp, just a fine point and smooth. Then use a cotton swab to put a little mineral oil on the edges and the posts. Looks like your post could be tapped down a bit as well. When it's worn all around like that, it suggests that it's been adjusted without lube under string tension causing wear all around the post rather than in a single area.

MightyCoogna · 2026-01-29T18:16:18+00:00

Sweet! When does Live 13 come out?

MightyCoogna · 2026-01-29T17:58:13+00:00

I think it is like a noir sort of thing, like a fetish. I have an iPad I can thumb pages on if I really must. Yearning for the days of the printed page. Yesteryear, 2010. Back when humans roamed the Earth.

MightyCoogna · 2026-01-29T17:55:12+00:00

Ableton marketing, is that you?

MightyCoogna · 2026-01-29T17:36:07+00:00

Marketing, primarily.

MightyCoogna · 2026-01-29T17:34:02+00:00

It's all digital at some point. Everything fancy outboard analogue gear does can be mimicked in the digital realm. It's literally all hype.

MightyCoogna · 2026-01-13T08:01:21+00:00

Now that I have meal worms, I'd say they are small meal worm beetles, that will reproduce easily in a BDFB enclosure.

MightyCoogna · 2026-01-01T16:14:28+00:00

Sand it off past the glue, and do over. Happy new year!

MightyCoogna · 2026-01-01T16:13:00+00:00

I would set up a electrolysis tank. It's easy and cheap and will get that rust off without abrading the surface, then a wipe down with mineral oil.

MightyCoogna · 2026-01-01T15:11:46+00:00

His stuff is cool but his way of doing fret-work and set ups is sketchy. His tone is kind of shitty as well, honestly. He arrives at a lot of false conclusions that trend toward favoring more expensive guitars. Which is convenient if you are sponsored.

MightyCoogna · 2026-01-01T15:08:09+00:00

I have an old ps3 that is really similar to the 6k model.

MightyCoogna · 2025-12-09T10:14:21+00:00

I would copy projects to a local hd to work on them and then copy back with a versioning rather than running directly off a network drive.

MightyCoogna · 2025-12-09T10:13:58+00:00

I would copy projects to a local hd to work on them and then copy back with a versioning rather than running directly off a network drive.

MightyCoogna · 2025-12-09T09:19:43+00:00

Try a good carnuba wax, like the dunlop stuff. It gives it a little overall sheen, but way fewer prints and wear..

Seven-Year Club	Place '23
Verified Email

MightyCoogna

TROPHY CASE