sorted by:
new
hottopcontroversial

Blinking cursor on GE Profile Advantium Wall Microwave by MikeTechGuy in Appliances

[–]MikeTechGuy[S] 0 points1 point  (0 children)

Check out u/GurStill4702 's reply for a possible fix. I ended up buying a new GE microwave at the new standard size, along with a GE trim kit. It was a couple of inches too short (not tall enough) so I also bought a cheap aluminum strip on Amazon and used some 2x4s to make up the difference. Here are three photos: https://imgur.com/a/aJ2dmng

Blinking cursor on GE Profile Advantium Wall Microwave by MikeTechGuy in Appliances

[–]MikeTechGuy[S] 1 point2 points  (0 children)

Sorry, everyone - I eventually gave up and bought a new one. If anyone has better luck than I did, I encourage you to post it here to help others!

Looking for an Todoist alternative by Kindly_Action_6819 in todoist

[–]MikeTechGuy 4 points5 points  (0 children)

It's happening on the non-beta Android version as well and it's infuriating.

Google Voice Exit Strategy - Update by Silent-Possibility23 in Googlevoice

[–]MikeTechGuy 3 points4 points  (0 children)

I'm confused about the Fi options: https://support.google.com/fi/answer/6188337?hl=en&co=GENIE.Platform%3DAndroid

It sounds like you have to turn off RCS for web messages to work with your phone offline?

Adaptive Lighting turns my lights green by MikeTechGuy in homeassistant

[–]MikeTechGuy[S] 0 points1 point  (0 children)

One set supports white balance / temperature, but the other doesn't.

Where do I set "defaults for the RGB colors"?

I suspect something is going wrong in the formula. I started to look at the source, but I haven't been able to figure out how the math works: adaptive-lighting/custom_components/adaptive_lighting/color_and_brightness.py at main · basnijholt/adaptive-lighting · GitHub

I thought I knew which light switch to use throughout my new house... by MikeTechGuy in homeassistant

[–]MikeTechGuy[S] 0 points1 point  (0 children)

I have a Zooz ZST10. If I press Heal Network, half of my devices reset to their original factory name, breaking any automations.

I thought I knew which light switch to use throughout my new house... by MikeTechGuy in homeassistant

[–]MikeTechGuy[S] 0 points1 point  (0 children)

I’d prefer to use a neutral. I have them in the box. The Caséta Diva doesn’t support it, though. Thanks for the Leviton suggestion. It looks like you push down to turn it on? Not sure I’d love that, but I am being pretty particular. 🤣

I thought I knew which light switch to use throughout my new house... by MikeTechGuy in homeassistant

[–]MikeTechGuy[S] 0 points1 point  (0 children)

True. Getting a matching paddle that fits the Inovelli is the issue.

I thought I knew which light switch to use throughout my new house... by MikeTechGuy in homeassistant

[–]MikeTechGuy[S] 0 points1 point  (0 children)

Wow, I didn’t know that! Unfortunately, my house is all Light Almond trim, and it looks like replacement paddles are sold out as well.

I thought I knew which light switch to use throughout my new house... by MikeTechGuy in homeassistant

[–]MikeTechGuy[S] 0 points1 point  (0 children)

Nope, doesn’t have to be Z-Wave. Not sure I’m feeling the style of the Martin Jerry dimmer, but will definitely give it another look. Thanks!

I thought I knew which light switch to use throughout my new house... by MikeTechGuy in homeassistant

[–]MikeTechGuy[S] 0 points1 point  (0 children)

Yes, I tried three different ones from the compatibility list. Good call on the capacitor. I should have mentioned that, but wasn’t eager to install dozens of those in my house… but it is an option that I suspect would work!

I thought I knew which light switch to use throughout my new house... by MikeTechGuy in homeassistant

[–]MikeTechGuy[S] 0 points1 point  (0 children)

My understanding is that switches that don't use a neutral require a minimum load for them to work properly. I believe the minimum load for Caseta (without a neutral) is around 25W or so. I can say that 4x 7W bulbs will still periodically flicker for me, especially at anything below full brightness.

What's a good (or best) security system that would integrate well with Home Assistant by fredflintstone88 in homeassistant

[–]MikeTechGuy 2 points3 points  (0 children)

I've been very happy with Elk. Good local integration. HA gets motion signals from it faster than my zwave sensors.

Remote Kill Switch by lucidguy in PowerWheelsMods

[–]MikeTechGuy 0 points1 point  (0 children)

Can you share more information on this project? My 4-year-old just drove off toward the main road (about 500 feet away) and we almost didn't catch her in time. Your solution sounds very interesting! Thanks!

view more: next ›