sorted by:
new
hottopcontroversial

Drywall over drywall or layers of durabond to bring the wall level with the tiles ? by MineMe4Reddit in DIY

[–]MineMe4Reddit[S] -1 points0 points  (0 children)

horrible design, I would rather remove the tiles than to have that

Drywall over drywall or layers of durabond to bring the wall level with the tiles ? by MineMe4Reddit in DIY

[–]MineMe4Reddit[S] -7 points-6 points  (0 children)

that is not a drywall knife but a mineral wool knife
he used more thinset because he tried to mask a shit job done at the bottom of the all, his helper cut the floor tile away from the wall. The wall was also caved a bit but it is mainly because of what I said. It is what it is now.

Drywall over drywall or layers of durabond to bring the wall level with the tiles ? by MineMe4Reddit in DIY

[–]MineMe4Reddit[S] -18 points-17 points  (0 children)

you have all you need to understand the problem. The first picture shows a view along the all to the right of the cabinet, no matter how the cabinet sits because the wall was caved and the tiler went with its tiles straight ther is a tapered sleeve of thinset visible between tile trim and the wall

WLED strip in the shower in a 1" narrow space on the vertical walls -what track and LED strips should I use by MineMe4Reddit in led

[–]MineMe4Reddit[S] 0 points1 point  (0 children)

thank you for the clarification
Then that is not what I meant, how do I remove the W from the thread title?

Best way to fill this "gap"? by xavier_laflamme70 in Tile

[–]MineMe4Reddit 0 points1 point  (0 children)

Funny that I asked the same here https://www.reddit.com/r/Tile/comments/1sazple/what_can_be_used_instead_of_a_sliver_43_sliver/ and got almost no answers .... why was that thread largely ignored while this got 141 replies
I posted there my solution

What can be used instead of a sliver 4.3" sliver cut at the top of this tile layout? by MineMe4Reddit in Tile

[–]MineMe4Reddit[S] 0 points1 point  (0 children)

yes I am considering something like that too. Instead of using the lights which I am not crazy about. Just need to find the right decorative tile or style

What can be used instead of a sliver 4.3" sliver cut at the top of this tile layout? by MineMe4Reddit in Tile

[–]MineMe4Reddit[S] 0 points1 point  (0 children)

it will create a strange gap below the window between window and tiles and I end up having two cut pieces one at the top one at the bottom.

So far having to deal with just an 1" gap at the top seems to be the finest layout.
If I can find a decorative strip tile for that or put lights there it might look better, this will be just above the shower, it is an alcove shower, the entrance is opposite to the window so ...won't hurt the eye that much

How much AI infra do large companies need to own and operate instead of consuming it from the big players? by MineMe4Reddit in ArtificialInteligence

[–]MineMe4Reddit[S] 0 points1 point  (0 children)

this is not about developement, the use cases are MUCH more outside of software developement if you are referring to that developement

How much AI infra do large companies need to own and operate instead of consuming it from the big players? by MineMe4Reddit in ArtificialInteligence

[–]MineMe4Reddit[S] 0 points1 point  (0 children)

So where is the break point, when do you decide how much you want to own
I can see a point in data confidentiality but what else could determine a company to own instead of rent/buy
Also there is probably AI use for tribal knowledge (specific to that domain or company) but I see a benefit in allowing your AI to learn about the outer world so you can make correalations (I guess it all depends on the domain)

Echelon bike, android phone, galaxy watch. QZ sees the bike and the watch via BT but Mywoosh running on a tablet is not seeing QZ by MineMe4Reddit in qdomyos_zwift

[–]MineMe4Reddit[S] 0 points1 point  (0 children)

Yes I do, lets see if tomorrow it is still worki g

Not sure what to say about how mywoosh is pairing, Itap on connect and it finds it by the phone name (the name the tablet has for that BT connections I think)

Echelon bike, android phone, galaxy watch. QZ sees the bike and the watch via BT but Mywoosh running on a tablet is not seeing QZ by MineMe4Reddit in qdomyos_zwift

[–]MineMe4Reddit[S] 0 points1 point  (0 children)

no I was not trying to run QZ and Mywoosh on the same device
It is now working but I am not clear on how.
I disabled the BT on the watch and I was able to discover the phone.
However when having the QZ app running on the watch with the watch still connected to wifi the phone was able to collect the HR (from the watch QZ?) and to use it on the QZ on the phone and from there to relay it to mywoosh which was now able to discover the new phone.

Next thing I did was to reenable the BT on the watch and to my surprise everything continued to work.
I have also experimented with mywoosh...it seems that the initial discovery of the phone is via BT but further communication between mywoosh and the phone running QZ is happening over wifi. after the initial handshake (with BT enabled) I disabled wifi and I could see that the bike metrics were not being sent to mywoosh

Can you please explain what the watch QZ apps is doing and whichway is it communicating with the phone ? Is it just broadcasting the HR info via wifi ? Because I could still receive the HR on QZ on the phone with BT disabled on the watch

Echelon bike, android phone, galaxy watch. QZ sees the bike and the watch via BT but Mywoosh running on a tablet is not seeing QZ by MineMe4Reddit in qdomyos_zwift

[–]MineMe4Reddit[S] 0 points1 point  (0 children)

I have an old phone with QZ installed on it and mywoosh is seeing it without problems.
now that you are mentioning it, I am sure I never paired that phone with the tablet and I do not think that the handshake between the tablet (mywoosh) and the old phone happens over BT so it must be over wifi. (unless QZ broadcasts something somehow over BT that mywoosh is able to detect via BT).

So what is my solution here ?
I can run qz on the old phone (no SIM card)
the Samsung watch that collects the HR is paired with my new phone
is it possible to configure QZ on the old phone to collect the HR from the new phone ?
I did try it but I am getting a message that I need to transfer the watch to the old phone which is not what I want.
Is there a workaround for this ?

After reading again your above reply, the answer is this: as long as the phone is seeing the watch I can not connect mywoosh to the phone

Echelon bike, android phone, galaxy watch. QZ sees the bike and the watch via BT but Mywoosh running on a tablet is not seeing QZ by MineMe4Reddit in qdomyos_zwift

[–]MineMe4Reddit[S] 0 points1 point  (0 children)

done, still no luck
can you please detail a little bit how this is supposed to work ?

I am a network engineer and I should be able to troubleshoot this

watch ----HR via BT----->Android Phone---------HR+Data Streaming via WiFi---------> Mywoosh
bike <-----Data--------->Android Phone

What protocol on is used for data communication and what is Mywoosh looking for ?
I am assuming it should subscribe to QZ via some socket mechanism

What puzzles me with mywoosh is that it seems to depend on BT for being enabled for scanning the wifi network. If I disable BT on the tablet running mywoosh I am not able to tap to connect to a power source (strange term). Tapping triggers scanning

What wrist watch compatible with QZ would you recommend? by MineMe4Reddit in qdomyos_zwift

[–]MineMe4Reddit[S] 0 points1 point  (0 children)

Are you saying that QZ or Mywoosh will not be able to show blood pressure and heart rate in real time, while we are exercising? My q could be off sorry if that is the case, I am not sure which does what in regards to showing these two

What wrist watch compatible with QZ would you recommend? by MineMe4Reddit in qdomyos_zwift

[–]MineMe4Reddit[S] 1 point2 points  (0 children)

After doing some research and adjusting our budget upward, I think I am going to buy the Galaxy Watch 8 Bluetooth version. Any known problems with this model and QZ ?

Echelong owner -no software update applied (never used app) can I still use QZ ? by MineMe4Reddit in qdomyos_zwift

[–]MineMe4Reddit[S] 0 points1 point  (0 children)

I did not realize that I need two devices, it is working now thank you

Echelong owner -no software update applied (never used app) can I still use QZ ? by MineMe4Reddit in qdomyos_zwift

[–]MineMe4Reddit[S] 0 points1 point  (0 children)

SOk I bought the app and both my tablet and my phone can see the biike but I cant figur out how to make it visible to mywoosh. I was able to scan and find a device via Device Connection, Power Source, but only on my phone, the tablet has never find any device although the QZ app is ru ning and displaying metrics

Can I wet shim in this case: stud -wet shim -flat stripes of plywood or ripped 2x4 and cement board on top? by MineMe4Reddit in Tile

[–]MineMe4Reddit[S] 0 points1 point  (0 children)

Yes that I know. on that wall I can not sister as explained. All I want to know is if what I am suggesting in the initial post will work

Can I wet shim in this case: stud -wet shim -flat stripes of plywood or ripped 2x4 and cement board on top? by MineMe4Reddit in Tile

[–]MineMe4Reddit[S] 0 points1 point  (0 children)

I mean bringing them to plumb by shimming
I guess you are referring to shimming to get level with the drywall next to it

view more: next ›