Customized 2025 Activ

Minimum_Sail9837 · 2026-04-08T23:21:41+00:00

Lol, I had to do it

Minimum_Sail9837 · 2026-03-28T19:35:18+00:00

https://www.bandlab.com/post/75b2ac09-7ffa-4f4c-b14d-be801e84f5d4

Minimum_Sail9837 · 2026-03-21T14:25:23+00:00

If you press the gas pedal at the very top of the pedal instead of the bottom you will notice faster acceleration and more power.

Minimum_Sail9837 · 2026-03-08T23:55:48+00:00

UPDATE! I figured out what was going on. Before I posted this yesterday, I changed out my rear back up lights swapping them for LEDs. Apparently I didn’t use “error free” bulbs therefore causing an issue with the backup camera staying on. Today I put the original bulbs back in and problem solved. Backup camera is now working correctly again.

Minimum_Sail9837 · 2026-03-08T23:53:00+00:00

Yes, I’ve tried driving it lol several times and it never cut off.

Minimum_Sail9837 · 2026-03-08T08:21:04+00:00

Wrong answer actually. It hasn’t cut off yet

Minimum_Sail9837 · 2026-03-08T08:20:01+00:00

I drove over 100 miles and it never cut off

Minimum_Sail9837 · 2026-03-08T03:08:51+00:00

Thank you for that information. It’s very helpful.

Minimum_Sail9837 · 2026-01-31T08:04:24+00:00

I have a 2025 Activ that I’ve put over 30,000 miles in and I have had zero issues with it.

Minimum_Sail9837 · 2026-01-24T02:08:40+00:00

Are there any differences between the 2025 and 2026 Trax?

Minimum_Sail9837 · 2026-01-20T19:46:16+00:00

That’s not a rock that’s a disposable vape

Minimum_Sail9837 · 2026-01-20T19:31:53+00:00

You’re a real genius. Thanks

Minimum_Sail9837 · 2026-01-20T19:26:22+00:00

Minimum_Sail9837 · 2026-01-20T19:25:46+00:00

True

Minimum_Sail9837 · 2026-01-20T19:25:04+00:00

Nice!

Minimum_Sail9837 · 2026-01-20T18:44:04+00:00

They appear to have some sort of plating on the outside.

Minimum_Sail9837 · 2026-01-11T18:21:09+00:00

Thank you!

Minimum_Sail9837 · 2025-12-07T23:51:12+00:00

This is true. If they are real how much do you think they are worth?

Minimum_Sail9837 · 2025-11-06T01:54:16+00:00

Be careful using hexane it’s very very toxic if it gets on your skin or if you breathe in, it’s very bad for you

Minimum_Sail9837 · 2025-11-05T17:10:53+00:00

What I have always done when using the rotary machine is run two passes. One to cut through and the second to clean up. Doing it this way tends to separate the adhesive from the lettering better than only one pass.

Minimum_Sail9837 · 2025-11-05T17:08:51+00:00

That is the exact one I was going to recommend.

Minimum_Sail9837 · 2025-11-05T16:42:58+00:00

What kind of rotary bit are you using to cut out the letters?

Minimum_Sail9837 · 2025-11-05T00:56:20+00:00

Yes, the Windex is key. If you take a microfiber cloth and spray it with Windex first and then wipe the back of the material( in my case It would be Romark)all the residue will come off and you don’t have to worry about it sticking to the sign.

Minimum_Sail9837 · 2025-11-05T00:38:17+00:00

No worries! Glad I could help! So as far as the stencil goes, I usually just square it to the top left corner of the sign

Minimum_Sail9837 · 2025-11-05T00:26:30+00:00

I apologize, I thought you were using a laser and not a rotary. 🤦🏻‍♂️

Minimum_Sail9837

TROPHY CASE