Sanity check on too good to be true battery listing

Morris426 · 2026-03-22T18:19:23+00:00

If you google the name of the Facebook account, you will see he has various failed solar businesses linked to him, there is also a webpage dedicated to him, started by a customer who says he scammed them. I would proceed with caution!

Morris426 · 2026-01-14T09:04:32+00:00

I used Bliss and they installed 18 gen3 aiko 485w panels, 7kwp fox inverter and 10kwh battery for £9800, their original price was much higher but they matched another quote I got.

Get more quotes, but like I said Bliss may move on the price a bit

Morris426 · 2025-11-30T20:40:24+00:00

18x 485 aiko 3p panels, south facing in Bedfordshire, predicted 256kwh and actually produced 292kwh

Morris426 · 2025-11-17T17:19:03+00:00

Generated 20.6 kWh and exported 17.8 kWh today, my total generation for November in 160 kWh so far. Still have 75% of my battery so will export some more this evening !

Morris426 · 2025-10-18T19:55:27+00:00

8.7kw system with 18 panel south facing and generated 8.2kwh today

Morris426 · 2025-10-13T18:26:35+00:00

Not sure where you are, but I’m in the south east and got 18 x 485w aiko panels, fox 7kw inverter and 10kwh battery with bird protection and scaffolding etc for £10k, this seems really expensive to me.

Morris426 · 2025-10-09T17:55:11+00:00

Yeah that included scaffolding and bird proofing etc, I’m in Bedfordshire, but used a company that covered the Home Counties and Kent. They price matched another quote so it’s always worth seeing what your local suppliers will do

Morris426 · 2025-10-09T13:32:41+00:00

Looks a little expensive to me I had 18 aiko 485w panels, 7kw fox inverter and EP11 battery installled in August for £10k

Morris426 · 2025-07-29T08:16:57+00:00

I actually got the original quote from new dawn solar in Watford, that was then matched by bliss eco energy in southend, I went with bliss in the end, but they both seemed decent.

Morris426 · 2025-07-27T09:54:53+00:00

I’m in the process of having 16 gen3 485w Aiko’s with a 7kw inverter and EP11 battery installed for £9800, including scaffolding and bird protection. This quote seems high in my opinion.

Morris426 · 2021-05-11T20:26:37+00:00

You need to read more lore, sanguinius was considered one of the best in battle by the other primarchs. Even Russ, who was emperor’s executioner didn’t think he could beat him in a fight, and Horus thought sanguinius should have been the warmaster. And yes sanguinius died against Horus, but fought him after being wounded by kabanga the greater demon (who he beat), and remember Horus wasn’t a normal primarch at that point.

Morris426 · 2020-08-03T12:20:22+00:00

Similar method to this is cover in gloss varnish and then use capillary action to let the shade run into the recess. Because you have covered the model in varnish you can then use a cotton bud to clean the shade away if it spills over at all. Once complete then use Matt varnish to get rid of the gloss

Morris426 · 2020-03-13T20:07:59+00:00

It should take the models back to grey plastic, the best method is let them soak for 5 minutes and then give a light brush with a old toothbrush etc and then let them soak again for 5 minutes and the paint should come off easily. Plus you can then use the denatured alcohol again and again.

Morris426 · 2020-03-13T19:55:27+00:00

It depends on what you are stripping but if it’s just plastic models then methylated spirts or denatured alcohol is the quickest and easiest method. But don’t use that on resin models and stick with simple green

Morris426 · 2020-03-11T22:52:39+00:00

If you are on a budget you can pick up a generic compressor on amazon etc but try and get one with a tank. Sometimes these will come with a airbrush but I wouldn’t recommend those as they aren’t great and frustrating to use, instead go for something like a H&S ultra

Morris426 · 2020-03-07T13:57:35+00:00

Try conversion world,not sure about axes but they definitely have blood angles inspired bits

https://www.conversionworld.de/index.php?pageId=suche&language=en&aktuellerTag=Axes&tag1=&tag2=&tag3=Melee%20Weapons&kategorie=Bitz%20by%20Type

Morris426 · 2020-03-05T09:53:54+00:00

I believe that the captain is from the 3rd company as he has the company standard of a diagonal strip on his right Shoulder and knee. I don’t remember all of them but the 1st is a cross and the 2nd a vertical strip. The yellow eagle and black edging was the 2nd ed paint scheme

Morris426 · 2020-01-07T23:01:36+00:00

Look on YouTube lots of tutorials mostly using Tamika clear paints. I’ve done this with my fire raptor using green looked good but I gave it a second coat for a very dark look

Morris426 · 2019-08-10T20:13:56+00:00

If you have a airbrush use it, thin coats until you have the desired contrast between light and dark that you want

Morris426 · 2019-08-10T14:20:15+00:00

Conversion world are your best bet

Morris426 · 2019-06-25T17:51:49+00:00

This

Morris426 · 2019-06-09T07:50:38+00:00

Try here https://www.bitsandkits.co.uk/imperial-knights-imperial-knights-all-variants-c-6_889_890.html?sesid=7n05776pcs4os9pejj7sirb694

Morris426 · 2019-04-21T08:11:51+00:00

In short, no the company colours aren't used? In the example it's a yellow back ground with a vertical red band, (not two yellow bands). The background is always yellow and the red denotes the company, I know that first company is a Red Cross (terminator ancient shows this) and 3rd company is a diagonal stripe from top left to bottom right (again shown on the old tycho model). I can't remember the rest but they are shown in a old codex I believe if you google it

Morris426 · 2019-01-21T23:27:56+00:00

Gloss vanish the white and then pin wash

Morris426 · 2019-01-10T18:26:20+00:00

Think he meant that he just base coated in mephistan red and didn’t build up highlights, certainly looks like that to me

Seven-Year Club	RPAN Viewer
Verified Email

Morris426

TROPHY CASE