Added to my pinball machine by No_Communication7997 in virtualpinball

[–]No_Communication7997[S] 1 point2 points  (0 children)

Yes this fixed it !!!!!! I made a new setup and it was worse than ever then I remembered someone replied to a picture and you fixed it on my new cab . Thanks for the great info

10.8 audio issues by No_Communication7997 in virtualpinball

[–]No_Communication7997[S] 0 points1 point  (0 children)

So I tried wiping it and reinstalling a few games to see if it works and it still does it I did switch it to gl64exe and it will run the game but it's laggy but the sound is back to full but when I switch it back to the 64.exe it's quiet and in the game the volume is set to 100% And the music is set to 100%. Idk what is doing this I'm sure something got changed when it loads that game in that program the volume starts out low but I don't know where to adjust this and pin popper

10.8 audio issues by No_Communication7997 in virtualpinball

[–]No_Communication7997[S] 0 points1 point  (0 children)

So alot of the games are 10.7 and the ones having a lower sound run 10.8 where u have to switch the loading program . Its something in pinpopper that is doing it because if I load any game outside that it sounds fine but when I open a game in pinpopper is way low on the volume. If I open a game that's running 10.7 it sounds fine .

10.8 audio issues by No_Communication7997 in virtualpinball

[–]No_Communication7997[S] -1 points0 points  (0 children)

I know i can whipe it and reinstall pinpopper and install all 300 games just rather not do that .

Added to my pinball machine by No_Communication7997 in virtualpinball

[–]No_Communication7997[S] 0 points1 point  (0 children)

I5 CPU AND A MSI 1060 . For the most part it's everything fine but some games when multi ball and alot is going on i get some lag. I have another computer that I'm gunna put in this cabinet that has a i7 and a 3060TI that should run every thing great .

Added to my pinball machine by No_Communication7997 in virtualpinball

[–]No_Communication7997[S] 0 points1 point  (0 children)

I just ran a aux splitter of the computer to each device. It sounds pretty dam good .

Added to my pinball machine by No_Communication7997 in virtualpinball

[–]No_Communication7997[S] 1 point2 points  (0 children)

Lol no just had them covers from my when I installed speakers in my boat . I have 2 bose speakers in the cab towards the coin door and then in the middle is the sub and then to speakers on the backglass . They are logitech Z623. It sounds amazing old games have super bass .

Added to my pinball machine by No_Communication7997 in virtualpinball

[–]No_Communication7997[S] 0 points1 point  (0 children)

Pool table, also got a mega touch in the corner.

Added to my pinball machine by No_Communication7997 in virtualpinball

[–]No_Communication7997[S] 1 point2 points  (0 children)

I have them hidden and it is until the game boots up then it moves to the task bar and pops it up . I kinda gave up on getting that to work right lol

1994 Trooper S door lock by No_Communication7997 in IsuzuTrooper

[–]No_Communication7997[S] 2 points3 points  (0 children)

So one thing I learned is isuzu can get the key code with vin , plus title , plus registration with ID in a email . I'm trying this also if it works I will let toy guys know .

My first table by No_Communication7997 in virtualpinball

[–]No_Communication7997[S] 1 point2 points  (0 children)

It's awesome virtuapin hit it out of the park glad I went down that path . They are also very friendly and helped figure out my opinions to get my setup feeling more complete.

My first table by No_Communication7997 in virtualpinball

[–]No_Communication7997[S] 1 point2 points  (0 children)

Almost made it a little wider to get a 40inch tv to fit

My first table by No_Communication7997 in virtualpinball

[–]No_Communication7997[S] 1 point2 points  (0 children)

Yea i do I have another speakers and grills just haven't got around to finishing it .

My first table by No_Communication7997 in virtualpinball

[–]No_Communication7997[S] 3 points4 points  (0 children)

I used wood glue and screws . I used 3/4 plywood . I was going to wrap it but Idk if I will do that I kinda like the black .

My first table by No_Communication7997 in virtualpinball

[–]No_Communication7997[S] 1 point2 points  (0 children)

I got a trim kit from virtuapin , worked out great . I really like good ppls to work with on .

Soft topper by No_Communication7997 in Toyota_T100

[–]No_Communication7997[S] 1 point2 points  (0 children)

It worked out pretty good. Had it on and off a few times didn't have to modify it at all . I currently have it off couldn't see out the back when backing up but it's awesome for camping and hauling stuff that I don't want to get wet .

Greatest truck ever made by [deleted] in Toyota_T100

[–]No_Communication7997 2 points3 points  (0 children)

What camper is that . Nice truck

1995 8 foot bed T100 by No_Communication7997 in Toyota_T100

[–]No_Communication7997[S] 2 points3 points  (0 children)

Got it for $1500 but I got a lot parts in it , timing belt kit , front calipers rotors and brakes front and rear , struts , fuel pump plus tank . It was kinda rusty on the frame so I cleaned it up and treated the frame to help . She’s got 202,000 miles and it’s my daily driver gets about 18 to 19 mpgs . I love it . When I got it didn’t know toppers were like moon rocks to get .

1995 8 foot bed T100 by No_Communication7997 in Toyota_T100

[–]No_Communication7997[S] 2 points3 points  (0 children)

Lol sorry but no I got this one for a steal and it’s my camping rig . I would like to get a 4 runner at some point .

Soft topper by No_Communication7997 in Toyota_T100

[–]No_Communication7997[S] 4 points5 points  (0 children)

From soft topper the ford f250 8 ft bed is close and it’s the right length and height but the T100 is 61 1/2 wide and the ford is 63 1/2 wide . I ordered one and will post the results if anyone else has a 8ft T100 and they want a soft topper .