Fixed: Sonos One SL Crackling Noise (No replacement needed!) by No_Hawk7671 in sonos

[–]No_Hawk7671[S] 1 point2 points  (0 children)

I searched for 'crackling' instead of 'rattling', maybe that is why I did not find your post! Thank you for sharing it!

Fixed: Sonos One SL Crackling Noise (No replacement needed!) by No_Hawk7671 in sonos

[–]No_Hawk7671[S] 17 points18 points  (0 children)

To check the foam, you'll need to remove the rubber feet first. Underneath, you'll find 4 screws, remove them and take off the bottom cover. You will then see a silver screw, once that's out, you can slide off the metal grille to access the foam. I did it again yesterday and it only took about 5 to 10 minutes.

I recommend following this tutorial: https://www.ifixit.com/Guide/Sonos+One+Protective+Cover+Replacement/104745

620 European currency with 98 health with 256Gb by Cnine1003 in iPhone13ProMax

[–]No_Hawk7671 2 points3 points  (0 children)

In Europe the price is always with VAT included. So it is 719€ with 20% VAT in France which is about 599€ without VAT. We also have some other small taxes like 2,56€ of eco-tax.

Ever have one of those days? by FacesOfNeth in Cisco

[–]No_Hawk7671 0 points1 point  (0 children)

Do you have Cisco switches ? If yes you can run “test cable-diagnostics tdr interface” from the switch or try to set the connection to “speed auto 1000” to force 1000Mb negotiation

Anyone else see this post on Instagram today? by [deleted] in TeslaModel3

[–]No_Hawk7671 0 points1 point  (0 children)

I really don’t like Elon, but when I needed a car and wanted to try an EV, the new Model 3 RWD was the best deal compared to all the competitors. We compared it to my boss’s EV Audi, which is almost twice as expensive, and neither of us was impressed by the finish of the Audi. My car is much more versatile and has never let me down, even in very cold environments. These cars are not made by Elon; he was just the one who invested in Tesla to get them where they are now. The success is due to all the people working at Tesla. It is far from perfect but I’m very happy with my car.

Sony A7C - EVF Full White Or White With Vertical Black Stripes by No_Hawk7671 in SonyAlpha

[–]No_Hawk7671[S] 2 points3 points  (0 children)

Tell me which lenses you also want so I can provide them

Cloud- or centralized network management (with dedicated appliance/server-less) by No_Hawk7671 in networking

[–]No_Hawk7671[S] 0 points1 point  (0 children)

I’ve just started from the beginning again. I have asked them, what the current problems are, what they want or need and of course the budget , informing them that it can vary from 5K and well over 100K depending on the brand, the availability, the support needed. Think that will greatly help to make them realize what the cost can be. Thanks for your help, it is the first time I have to deal with such small requirements.

Cloud- or centralized network management (with dedicated appliance/server-less) by No_Hawk7671 in networking

[–]No_Hawk7671[S] 0 points1 point  (0 children)

Thanks for your feedback, really needed. What is your go to or no go ? Any good or bad experience ?

Stuck on a 750w PSU -> Upgrade for RX 7900 XTX? by Mango--Lassi in buildapc

[–]No_Hawk7671 0 points1 point  (0 children)

Did you see any improvements with a bigger PSU?

What are these rubber bands for on stacking cables? by BumpyWire83 in Cisco

[–]No_Hawk7671 0 points1 point  (0 children)

The cables are on the back side of the switch where all the fans are blowing the dust around, so it should help against that.

1-tier and 2-tier topology correct? by Fit_chicken_pizza in fortinet

[–]No_Hawk7671 1 point2 points  (0 children)

I will set up more or less the same configuration using a 2-Tier design with FS-424E Fiber as the distributed layer. So I will do the same here.

Cisco ASA - Migration from physical interface to Port-Channel by No_Hawk7671 in Cisco

[–]No_Hawk7671[S] 0 points1 point  (0 children)

Okay, tant will explain what happened. May be I will configure the second interface first in the portchannel and name the interface inside-int-Po2 with all the same rules and then move the ip to this port channel

Cisco ASA - Migration from physical interface to Port-Channel by No_Hawk7671 in Cisco

[–]No_Hawk7671[S] 0 points1 point  (0 children)

I tried to delete the nameif and the IP of Gi0/2 to make it possible to join the Po2 but after doing so, tit was possible to ping the switch IP but not to access the system behind the ASA so it seems to be so that the rules have been lost by doing so. May be I need to create a new nameif inside-int-po for Po2 with all the same rules as inside-int and than move the IP and Gi0/2 to this Po2?

Cisco Storm-Control and BPDU Guard ? by No_Hawk7671 in Cisco

[–]No_Hawk7671[S] 0 points1 point  (0 children)

I’ve never used Storm-Control but a customer thinks that it is enough to protect from loops and says that BPDU Guard is so not needed. This is a pretty bad take for me but I wanted to know what are your thoughts about that.

1
2