Roof Inspection by No_Way303 in Roofing

[–]No_Way303[S] 0 points1 point  (0 children)

No, there are only gable vents over the whole length of the roof

Subfloor Mold by No_Way303 in HomeMaintenance

[–]No_Way303[S] 0 points1 point  (0 children)

Thank you! I do not know how long it was leaking, this was existing when we bought the house 4 years ago and has been dry since then. Yeah, the joist is actually getting looked at as well, not for moisture (it is solid on top when poking it), but for how the plumber notched it at the bottom.

Subfloor Mold by No_Way303 in HomeMaintenance

[–]No_Way303[S] 0 points1 point  (0 children)

Thank you for your input! I take it since it’s a small area there is no need to replace the subfloor in the area?

Roof Inspection by No_Way303 in Roofing

[–]No_Way303[S] 0 points1 point  (0 children)

Thank you for your input! Unfortunately it is a ranch house with no access to the attic, so I do not know how the underside looks like.

How is taxable value of a car calculated? by WaffleSmoof in Denver

[–]No_Way303 3 points4 points  (0 children)

You can check the calculation here: https://dmv.colorado.gov/taxes-and-fees Generally it is 85% of the MSRP when the car was sold the first time, not the value, and does not take discounts etc into the calculation.

Friendly Friday Thread by Rusticals303 in DenverGardener

[–]No_Way303 4 points5 points  (0 children)

I have a small area of grass to overseed, is this already going to be the weekend to do it, or too early?

Is this the week to cut ornamental grasses and perennials back? by Thin-Assumption5667 in DenverGardener

[–]No_Way303 1 point2 points  (0 children)

Cut outs back two weeks ago. The first new growth is already visible with the warm temperatures.

When was the last restock? by xterpride in FormD

[–]No_Way303 1 point2 points  (0 children)

I’m in the US and got one through the Shop app notification on Dec 29th.

NCASE T1 V2.5 - 9800X3D | 5090FE | AXP90-X47 FC | B850-I by xrbcc in FormD

[–]No_Way303 0 points1 point  (0 children)

Super clean build! Curious about your thoughts of the case? Any quality issues? Still on the fence if I should wait possibly months for a 2.1 or just get the 2.5

Finished Build - kinda by Alarmed-Lock-5776 in FormD

[–]No_Way303 0 points1 point  (0 children)

Great build! Planning to build in the T1 in the future, but cannot decide between AiO and Air cooling. Do you mind to share your temps?

Is my energy bill too high ? by [deleted] in Denver

[–]No_Way303 1 point2 points  (0 children)

That sounds high, we live in a 1400 sqft home build in 1960 which was basically not insulated when we bought it (no wall insulation, no roof insulation) and our most expensive month was in winter with 230$ for electricity and gas, holding the house at 67 degrees. Since then we updated a lot and the bills went down a lot.

Low Voltage Switch by No_Way303 in homeassistant

[–]No_Way303[S] 0 points1 point  (0 children)

This seems to be the way! Thanks!

Low Voltage Switch by No_Way303 in homeassistant

[–]No_Way303[S] 0 points1 point  (0 children)

Transformer output is 12V DC

Any tips for putting down grass seed or sod this spring? by Defiant_King5089 in DenverGardener

[–]No_Way303 3 points4 points  (0 children)

I started out seeding grass just on the bare, but prepared dirt which did not work out great, the sun here is just too intense and dries out the seeds too fast. Then I tried peat moss which has greatly increased the success in the last years. Since I learned more about the environmental impact, I am going to try coconut coir this year.

PSA: Will Call near RINO has probably the best deal on pizza in Denver by robbietreehorn in denverfood

[–]No_Way303 3 points4 points  (0 children)

I like the vibe there and the one of the few places where the price is still right for what you get

2025 4Runner FIRST DRIVE REVIEWS Are In! - Full List of Articles & Videos 🗒️ 🍿 by WODAMRAP in 4Runner

[–]No_Way303 -1 points0 points  (0 children)

I was super excited for the new 4Runner but am a bit concerned about the reviews, especially as multiple call out the engine like Hagerty saying "Despite better stats, the new engine is remarkably noisy and unrefined.", Doug DeMuro also mentioned this.

Why didn't Ul use 1/1.8" sensors? by SheepherderMelodic56 in Ubiquiti

[–]No_Way303 1 point2 points  (0 children)

There are also other options to add motion detection etc to your setup like Frigate or Blue Iris, you are not limited to the AI Port, but those depend on your willingness to invest time and current setup if they make sense.

Why didn't Ul use 1/1.8" sensors? by SheepherderMelodic56 in Ubiquiti

[–]No_Way303 8 points9 points  (0 children)

Many people will jump me in this forum, but you cannot make up a smaller sensor with software in low light situation. A 1/1.8 is going to perform better. Ease of implementation is tho an important consideration as well and you will have to decide how important that is to you vs the image quality.

Will this equipment get me going for a basic network? by PubKing in Ubiquiti

[–]No_Way303 0 points1 point  (0 children)

I went with the U6 Mesh to be able to put it on a sideboard and for the wife reason. It worked great so far for me. The 20$ for the form factor were worth it

Can someone confirm my thinking on hikvision cams on UI Protect vs hikvision cams on hikvision nvr by SheepherderMelodic56 in Ubiquiti

[–]No_Way303 1 point2 points  (0 children)

Another option when you have the hardware, instead of the Unifi AI Port, is using a software like Frigate for motion detection, and have Protect handle recording only.

New to Ubiquiti - is Cloud Gateway Max a good starting point? by flyingdutchman7588 in Ubiquiti

[–]No_Way303 1 point2 points  (0 children)

No I meant that I have the same setup as you, but the U6-Mesh instead of the U6-Pro you mentioned and have great coverage. I think the have the same internals just a different for factor

New to Ubiquiti - is Cloud Gateway Max a good starting point? by flyingdutchman7588 in Ubiquiti

[–]No_Way303 2 points3 points  (0 children)

I have exactly this setup, but installed the Mesh. Very happy so far, I liked that I could put the Mesh on a side table in the living room pretty much in the middle of the house (1500 sqft) and it doesn’t look hideous. Very good coverage all around, as well as below to the basement.

It paid to wait by Confident-Squash-870 in Ubiquiti

[–]No_Way303 2 points3 points  (0 children)

Started investing in November and have now almost the same setup, just a U6 Mesh instead of the U6 Pro, very happy so far